关于大行星（或月球）轨道器的冻结轨道

关于人造地球卫星的冻结轨道问题早已为人们所熟知，而且已有相应的卫星在轨运行。在考虑该冻结轨道形成时，主要依据地球扁率J3项与J2项的相对关系，这是由地球非球形引力场的特征所决定的，原理十分清楚，但其原理和结论不能随意地用于其他大行星(或月球)的轨道器。在一般情况下，对于低轨卫星形成冻结轨道的条件，非球形引力位中的奇次带谐项(J21 1，l≥1)将起重要作用。不仅仅是一个J3项，例如月球轨道器，J3，J5，J7和J9均有不可忽视的影响，而且与轨道倾角有一定的关系。为此，本文根据轨道理论对冻结轨道的存在性及其有关问题作进一步的分析，给将来的深空探测提供轨道设计的有关信息和依据。     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。     

A three-dimensional plasma and energetic particle investigation for the wind spacecraft

This instrument is designed to make measurements of the full three-dimensional distribution of suprathermal electrons and ions from solar wind plasma to low energy cosmic rays, with high sensitivity, wide dynamic range, good energy and angular resolution, and high time resolution. The primary scientific goals are to explore the suprathermal particle population between the solar wind and low energy cosmic rays, to study particle accleration and transport and wave-particle interactions, and to monitor particle input to and output from the Earth's magnetosphere.Three arrays, each consisting of a pair of double-ended semi-conductor telescopes each with two or three closely sandwiched passivated ion implanted silicon detectors, measure electrons and ions above 20 keV. One side of each telescope is covered with a thin foil which absorbs ions below 400 keV, while on the other side the incoming <400 keV electrons are swept away by a magnet so electrons and ions are cleanly separated. Higher energy electrons (up to 1 MeV) and ions (up to 11 MeV) are identified by the two double-ended telescopes which have a third detector. The telescopes provide energy resolution of E/E0.3 and angular resolution of 22.5°×36°, and full 4 steradian coverage in one spin (3 s).Top-hat symmetrical spherical section electrostatic analyzers with microchannel plate detectors are used to measure ions and electrons from 3 eV to 30 keV. All these analyzers have either 180° or 360° fields of view in a plane, E/E0.2, and angular resolution varying from 5.6° (near the ecliptic) to 22.5°. Full 4 steradian coverage can be obtained in one-half or one spin. A large and a small geometric factor analyzer measure ions over the wide flux range from quiet-time suprathermal levels to intense solar wind fluxes. Similarly two analyzers are used to cover the wide range of electron fluxes. Moments of the electron and ion distributions are computed on board.In addition, a Fast Particle Correlator combines electron data from the high sensitivity electron analyzer with plasma wave data from the WAVE experiment (Bougeretet al., in this volume) to study wave-particle interactions on fast time scales. The large geometric factor electron analyzer has electrostatic deflectors to steer the field of view and follow the magnetic field to enhance the correlation measurements.     

斜齿圆柱齿轮正交法参数优化设计

用正交法对斜齿圆柱齿轮传动进行参数优化设计 ,用方差分析法找出对质量影响最显著的因素 ,最后 ,由信噪比作为指标选出最佳参数组合 ,这是一种快速创新开发产品的设计方法。     

DSP的数学原理及在实时系统的应用

制造系统里所用的微处理器中，单片机只能做逻辑处理和简单数学计算，而数字信号处理器（DSP）可进行相当复杂的数学处理。本文概述DSP的数学原理及其技术特点，介绍了基于DSP智能控制器在制造业中实时测控系统的应用实例。     

铸造SiCp／ZL101复合材料的组织与性能

本文利用半固态搅拌铸造法制备了ＳｉＣｐ／ＺＬ１０１复合材料，对其组织和某些性能进行了研究，结果表明：ＳｉＣｐ在基体中分布均匀，无严重团聚现象，与基体结合良好，与基体合金相比，耐磨性，硬度有显著提高。     

直升机滑油换热器的结构优化设计

在直升机肋管式滑油换热器的初步热力性能设计计算基础上,应用数值优化原理,对滑油换热器结构的优化设计进行了研究,建立了结构优化程序.该程序以滑油换热器的重量为目标函数,采用正弦法去约束并结合单纯形加速法寻优.实例计算表明,将滑油换热器的热力性能计算程序同结构优化程序结合起来,可以建立自动匹配的换热器设计及优化程序系统.应用该软件,输入设计要求,就可获得既满足性能要求,且重量最轻的肋管式滑油换热器.该软件可推广应用于各种类型肋管式换热器.     

拉形条件对镜面蒙皮成形质量的影响

在充分考虑滑移带出现与成形件贴模度的基础上,通过分析拉形速度、毛料几何尺寸、模具几何参数、润滑方式对成形质量的影响,确定了合理的飞机镜面蒙皮拉形条件.结果表明,改善板料变形的均匀性,延缓滑移带出现,增加成形面内材料的变形程度,是制定最优工艺参数、提高成形质量的主要措施.     

基于SPCE061A数字语音温度控制系统的设计

以凌阳SPCE061A单片机为控制核心,设计并制作了一款具有温度设定灵活、数字显示及语言播报功能的水温控制器,通过PID控制算法产生脉宽调制波,提高了控制精度。实践表明:该水温控制器达到了设计要求,有一定的实用开发价值。     

快速预热型铷原子振荡器的研制

介绍了一种快速预热型铷原子振荡器的设计方法和试验数据 ,3 5min的锁定时间、0 4 5L的小巧体积和良好的频率重现性能 ,非常适合于战术应用。