斜向弹性支撑飞船座椅缓冲性能

当出现具有较大水平速度的斜冲击着陆工况时,飞船座椅头盆向冲击过载可能危及航天员生命安全。在现有的胸背向着陆冲击过载缓冲机构的基础上,引入座椅斜向弹性支撑模型,建立了斜向弹性支撑座椅缓冲系统的动力学模型。对具有较大水平速度的斜冲击着陆工况的仿真结果表明,相比于现有的铰接支撑缓冲系统,适当参数组合下的斜向弹性支撑座椅缓冲系统能有效降低航天员头盆向冲击过载且不增加胸背向冲击过载;综合支撑角度、刚度和阻尼各个参数影响规律,可以得到优化的座椅设计方案。     

含多裂纹连接结构损伤容限试验研究

 针对机翼典型对接结构,进行了平板空孔试样和螺栓搭接件在等幅谱及飞－续－飞谱下的多裂纹损伤容限试验,通过该试验开展多裂纹开裂模式及多裂纹扩展规律的试验研究,为多裂纹断裂力学理论分析、多裂纹结构剩余强度准则提供试验依据。     

Performance improvement for constellation SAR using signal processing techniques

A new concept of spaceborne synthetic aperture radar (SAR) implementation has recently been proposed - the constellation of small spaceborne SAR systems. In this implementation, several formation-flying small satellites cooperate to perform multiple space missions. We investigate the possibility to produce high-resolution wide-area SAR images and fine ground moving-target indicator (GMTI) performance with constellation of small spaceborne SAR systems. In particular, we focus on the problems introduced by this particular SAR system, such as Doppler ambiguities, high sparseness of the satellite array, and array element errors. A space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is proposed which can solve these problems to some extent. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing effect caused by the lower pulse-repetition frequency (PRF) and thereby retrieve the unambiguous azimuth wide (full) spectrum signals from the received echoes. Following this operation, conventional SAR data processing tools can be applied to focus the SAR images fully. The proposed approach can simultaneously achieve both high-resolution SAR mapping of wide ground scenes and GMTI with high efficiency. To obtain array element errors, an array auto-calibration technique is proposed to estimate them based on the angular and Doppler ambiguity analysis of the clutter echo. The optimizing of satellite formations is also analyzed, and a platform velocity/PRF criterion for array configurations is presented. An approach is given to make it possible that almost any given sparse array configuration can satisfy the criterion by slightly adjusting the PRF. Simulated results are presented to verify the effectiveness of the proposed approaches.     

离散气膜孔下游边界层的实验研究

“Ｘ”型热线测量了离散气膜孔下游边界层内的湍流量,将热线探头绕轴转三个角方位以感受三维湍流场信息。结果表明,边界层内湍动能分布呈反“Ｓ”形,吹风比和孔排数对参数分布有重要影响,这种影响在很长距离上不消失,所以,常用的ｋ－ε模型不经修正不能正确预计这类边界层的发展。     

面向设计的飞机翼面结构有限元自动建模技术

提出一种新的飞机翼面结构分析和优化的建模技术。引入“构件属性”的概念，利用“网状”数据结构来实施管理，并将图形用户界面（GUI）技术与CAD中的基本绘图功能相结合，从而形成具有领域特色的新一代快速和在一定条件下的自动建模系统。建模举例表明：此系统操作简单、使用方便、遵循结构分析与优化建模的专业做法。     

环状针刺C/C复合材料的压缩性能及破坏机理

以碳纤维针刺毡为预制体,采用CVI致密工艺制作准三维C/C薄壁回转体,具有各向异性的力学性能.本文主要对三个主方向的材料压缩性能及破坏机理进行了研究讨论.结果表明:轴向压缩与环向压缩性能相似具有较高的压缩模量.材料的径向压缩表现为假塑性断裂行为,在材料的断裂面上具有大量纤维及基体碎屑,材料发生剪切破坏及基体压溃破坏.材料的轴向压缩与环向压缩表现为脆性断裂行为,材料主要以分层劈裂方式破坏.     

基于尺度不变特征的眼底图像自动配准与拼接

针对眼底图像对比度低、光照不均匀、不同视场的图像间存在几何畸变等特点,提出了一种基于尺度不变特征的眼底图像自动配准与拼接算法.该算法分别提取同态滤波增强后的待配准眼底图像的尺度不变特征点,并用向量进行描述,确定相邻两图像特征点的匹配关系,在MLESAC算法中使用透视变换模型去除误匹配点对,计算匹配点对之间的变换矩阵,进行图像空间变换,完成配准和拼接.对实际眼底照相机获取的多幅图像配准与拼接结果表明,该算法具有很好的鲁棒性和稳健性,配准精度达到像素级,可以实现眼底图像的高精度自动配准与拼接.     

导弹发射装置的总体设计方法

Anew method in system design of ejecting devices of missiles is first presented.Some important points are dis-cussed,which guid the research and development of new ejecting devices of missileg,amd provid the foundation flr thw design of mew ejecting device is provided.The system design includes the distribution of techmology specifica-tion,3-D solid modeling of ejecting devices of missiles im-ported from abroad,the design of pmeumatic device sys-tem,the design of ejecting mechanism system,the predic-tion of reliability and the experimental analysis,etc.     

基于时延的高精度泄漏点超声定向检测方法

针对当前气体泄漏点检测定向精度低的情况,提出一种基于时延的高精度超声检测方法.该方法利用3个呈等边三角形分布的超声传感器接收由泄漏点产生的超声波,根据3路信号的相对时延值确定泄漏点的方向.为克服采样间隔对时延估计精度的限制,采用基于三次样条插值的时延估计算法估计信号时延值,并对不同核窗长度下的各100组实验数据的时延值进行误差统计,得到其均方差并与其Cramér-Rao下界比较,发现二者的变化趋势具有良好的一致性.在此基础上研究了时延值均方差,超声传感器间距和泄漏点距离对定向精度的影响.结果表明:定向误差随时延值均方差增大而增大,随超声传感器间距增大而减小,随泄漏点距离增大而增大;定向精度比单超声传感器检测方法提高7～10倍.     

光伏发电系统中高升压比DC-DC变换器

光伏发电作为太阳能的重要应用方式正受到越来越广泛的关注,普遍采用前级DC-DC变换和后级逆变的结构。单相逆变器的输出电压通常为220 V(AC),这就要求前级DC-DC变换器具有很高的升压比。由于单级式DC-DC变换器难以满足要求,本文采用Boost变换器加ZVS全桥直流变压器的两级式结构。针对ZVS全桥直流变压器的不足,将LLC谐振网络应用于全桥直流变压器电路,提出了一种全桥LLC谐振直流变压器,从而实现整个负载范围内开关管的ZVS和整流二极管的ZCS。最后,分别制作了两台1 kW的原理样机进行实验验证,实验结果验证了理论分析的正确性。