星用非金属材料出气污染性质原位测试设备研制

成功研制了星用非金属材料出气污染性质原位测试设备， 可原位、连续、定量测试星用非金属材料出气可凝挥发物，给出全过程的出气数据。测试系统稳定、测试仪器灵敏、最小可检达４．４×１０－ ８ｇ／ｃｍ ２。是我国目前唯一的多功位星用非金属材料出气污染高灵敏度原位测试设备。     

一种基于六自由度并联机构的动基座模拟器

介绍了一种基于六自由度并联机构的海浪模拟器。该模拟器系统采用 6UPS并联机器人作为机械台体 ,由伺服电机驱动 ,具有六个运动自由度 ,可以在一定程度上模拟舰艇水面水下运动情况 ,从而为各类舰艇导航系统和瞄准设备的研发提供支撑载体。实验和使用表明系统控制精度高、性能良好 ,安全稳定     

多体卫星复合控制物理仿真试验系统

对于具有星间链路天线的多体卫星而言 ,进行星体姿态和天线指向复合控制的地面物理仿真试验研究是一个重要课题。本文主要叙述利用单轴气浮台模拟卫星姿态运动 ,由天线框架驱动机构 (GDA)实物连接组成的多体卫星平面运动动力学环境下的物理仿真试验系统。     

磁轴承控制器的设计及仿真研究

介绍了磁轴承系统的组成,对控制器性能的基本要求及控制方案的选择,分析了典型ＰＩＤ控制器存在的两个弊端,提出了磁轴承控制器的四种模型。通过对这四种模型的仿真研究,分析了各模型中比例系数、积分时间常数、微分时间常数及局部反馈系数对系统性能的影响,并给出了各参数较为理想的参考值及阶跃响应曲线,仿真结果对制作模拟控制器及数字控制器有一定的借鉴作用。     

构架式可展天线机构自由度分析——拆杆等效法

针对四面体构架式可展天线机构的多环耦合特性,提出了一种空间多环耦合机构的自由度分析方法——拆杆等效法。首先拆除四面体基本可展单元机构的耦合约束链,将剩余部分视为一个并联机构,然后应用螺旋理论分析各输出节点的自由度数目及性质,进而构造各输出节点与定节点之间的等效串联运动链,最后复原拆除的耦合约束链得到四面体基本可展单元的等效机构,应用修正的G-K公式计算等效机构的自由度数目,并基于反螺旋理论分析等效机构的自由度性质,从而获得四面体基本可展单元的运动特性。根据四面体基本可展单元的等效机构及其组合方式对最小组合单元及大尺寸构架式可展天线机构的结构进行了化简,并根据其几何特征约束方程推导了最小组合单元及大尺寸构架式可展天线机构的自由度。建立了由27个四面体基本可展单元组成的构架式可展天线机构的仿真模型,对该机构的自由度进行了验证,结果表明提出的拆杆等效法求得的自由度正确,为进一步分析此类天线机构的运动学和动力学奠定了基础,同时为其他类型的空间多环耦合机构的自由度分析提供了一种新的思路。     

对国有企业质量发展的探索

概述了国有企业质量发展面临的问题及解决这些问题的对策;并对国有企业质量发展的重点、模式和指导思想等提出了看法.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.