航天器软件风险集成管理方法

为确保航天器软件产品功能、性能符合任务需求,安全、可靠地完成飞行任务,需要对其进行风险管理。文章首先介绍了软件风险管理理论研究现状;然后结合航天器软件强实时性、高可靠性和安全性、维护困难等问题,提出了基于系统集成思想的软件风险控制方法;最后以某航天器为例介绍了该套方法的应用成果。研究结果可为识别航天器软件风险,提高软件产品质量提供参考。     

一些大涡内部的轴向流(英文)

用氢气泡法显示了两种大涡，即平板起动涡和细干扰线在圆盘前诱发的大涡的内部流动结构。它们的轴向流，涡核的孤立波，以及向破裂的演变。     

关联大系统强稳定性的主要结果

综述了近十余年来关联大系统强稳定性的研究进展．指出了系统可靠性研究与强稳定性研究之间的关系，给出了强稳定性研究的主要结果以及强稳定性的各种定义方法．文中着重分析了强稳定方法的研究途径和主要不足方面，并探讨了强稳定性研究的发展趋势．     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

一种有效的消波装置

对无限长渠道中小振幅入射波通过两块间距为ｌ,透水性能不同的多孔透水板的反射和透射进行了研究。应用分离变量法得到了反射波和透射波的波形。结果表明,当ｌ为入射波半波长的倍数时,反射波和透射波振幅最大,消波效果差,最佳消波率为５０％。当ｌ为入射波１／４波长加半波长的倍数时,反射波和透射波振幅最小,消波效果好,最佳消波率大于５０％。此外,还得到了无反射波的条件。     

基于控制力矩陀螺的水下运载器动力学与仿真

为弥补水下运载器(AUV,Autonomous Underwater Vehicle)中传统舵面控制机构的低速控制的不足,改善其操纵性能,引入单框架控制力矩陀螺(SGCMG,Single Gimbal Control Moment Gyro)作为控制机构进行姿态稳定与控制.把AUV简化为刚体,加入SGCMG,考虑水下环境的特点,建立基于SGCMG的AUV动力学模型,并仿真分析AUV的动力学、姿态运动、SGCMG的框架运动以及环境之间的相互作用.仿真结果说明:基于SGCMG控制的AUV的姿态机动快速、准确,低速性能理想,为操纵律设计及姿态控制算法研究提供基础.     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

神经网络在高空长航时无人机翼型多点优化中的应用

NSGAII算法在翼型多点设计中有着广泛的应用价值,然而其巨大的计算资源和计算成本限制了它的使用。为了解决这个问题,本文引入具有较强非线性映射能力的神经网络代理模型,采用实验设计结合BP法训练神经网络响应面来代替N-S方程求解翼型的性能。在实验点的数值模拟中,为了进一步节省计算资源,提高计算效率,采用网格的变形代替网格的重新划分,使得计算网格的更新速度提高了约50%。在翼型的参数化过程中,采用改进的PARSEC方法,用较少的参数实现了翼型的精确控制。为了增强神经网络的泛化能力,采用12-7-4-3-1的隐层结构。对NLF1015翼型的多点优化算例表明,此方法不仅显著降低了整个优化过程的计算量,而且对翼型的气动性能预测也具有较高的可信度,在高空长航时无人机的翼型设计中具有一定的潜力。     

4种DGPS模块动态定位精度测试与分析

采用RTK-DGPS为参照,对GARMIN GPS15L、Ublox LEA-4S、Gstar GS-87和Gstar GS-89m-J共4种DGPS模块在单机模式、地面伪距差分模式和卫星差分模式下的动态定位精度进行了测试和分析.结果表明:(1)对于GARMIN GPS15L 和Ublox LEA-4S,单机定位精度为米级,使用地面伪距差分定位可分别提高动态定位精度20%和87%;(2)总体上看,DGPS模块的地面伪距差分定位精度优于卫星差分定位,卫星差分定位精度优于单机定位;(3)在视野狭窄地段,无论单机定位、伪距差分定位还是卫星差分定位,动态定位精度都受到一定影响,和视野开阔地段相比,精度明显下降.     

基于热电制冷技术的某星载相机焦面组件热设计

热电制冷(Thermo-Electric Cooling,TEC)技术是利用帕尔帖效应的一种制冷方法,它不需要任何工质,无活动部件,结构简单,非常适宜于微型制冷领域或有特殊要求的场合.文章将TEC技术应用于某星载相机焦面组件的热设计,解决了探测器恒温控制问题.仿真分析结果表明,基于TEC技术的热设计方案在满足探测器恒温...