直升机运输效能试飞技术研究

对直升机运输效能进行了理论分析,给出了直升机各项运输效能指标的计算方法。利用试验机进行了直升机运输效能试飞,最后给出了直升机各项运输效能指标的飞行试验结果。对于后续的直升机运输效能试飞和直升机运输效能评估等工作具有重要的参考价值。     

某型飞机后边条焊接盒段优化研究

某型飞机后边条焊接盒段是用于安装平尾的重要受力构件,由材料为30CrMnSiA的板弯件、机加件及加强筋焊接组合而成。由于盒段焊缝数量多、零件壁厚薄,故在组合焊接时容易出现焊接变形、变形后校形困难等问题,使焊缝质量难以保证。本文对焊接盒段结构方案进行了优化研究,在最终选定的结构优化方案中,其盒段壁板为整体机加成型,大量采用机械连接,焊缝数量少,焊接形式简单,缩短了盒段的焊接周期,改善了焊接盒段生产的工艺性,满足了该型号飞机的批产要求。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

考虑输入饱和与姿态角速度受限的航天器姿态抗退绕控制

 针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。     

Effect of Dimensions on the Efficiency of Radiant Energy Cells

This paper deals with the enhancement of the quantum efficiency and photovoltaic energy conversion efficiency of a p-n semiconducting cell by optimizing the dimensions of the cell. Based on the Shockley-Read statistics a general expression for the quantum efficiency of monochromatic incident radiant energy photons has been derived in terms of the absorption coefficient of the incident photons, the minority carrier diffusion length, the built-in electrostatic field appearing in diffused cells, and the surface recombination velocity in the exposed layer of the cell. Although the expressions derived may be used for all semiconducting p-n cells, special efforts have been made in the analysis and computations of the germanium p-n cell. The germanium cells show a great potential for photovoltaic energy conversion from radiant sources other than the sun. The results for germanium indicate that the quantum efficiency strongly depends upon the thicknesses of the exposed and base layers. The built-in electrostatic field and the surface recombination velocity in the exposed layer influence the quantum efficiency greatly. Optimization studies for the thicknesses of the exposed and base layers of an n-p type germanium for different values of minority carrier diffusion length, built-in electrostatic field, and surface recombination velocity have been worked out.     

浮动零点法及其在声表面波（SAW）传感器中的应用

温度是影响传感器精度的重要因素。本文介绍了一种新的温度误差校正方法，即浮动零点法。该方法以差动原理和浮动坐标为基础，是实现温度校正较为理想的方法。     

基于DSP的飞机全电刹车数字防滑刹车控制器设计

分析了飞机全电刹车系统的基本结构及其工作原理,在此基础上,提出了以先进的数字信号处理器(DSP)为核心的数字防滑刹车控制器,采用速度差加压力偏调(PD+PBM)控制算法,使用ARJNC429总线通信方式进行通信,完成了数字防滑刹车控制器的软硬件设计及系统调试等.试验结果表明,该数字防滑刹车控制器工作稳定可靠,与系统联试...     

利用反射式衍射光栅进行瞬态应变测量

介绍了利用反射式衍射光栅进行瞬态应变测量的方法,在一维细长杆中,通过测量杆未端的绝对速度,就可以算出动态应变和应变灵敏度系数K,文章对该方法进行了理论计算和实验结果分析,给出了结论和进一步研究方向。     

复合材料与金属胶接结构的次弯曲效应研究

复合材料与金属胶接单搭接的次弯曲效应引起的剥离应力,会大大降低接头的强度。采用有限元方法分析复合材料铺向角、铺层顺序及斜削对次弯曲的影响,并进一步研究分析次弯曲和胶层剥离应力、板的弯曲刚度之间的关系。结果表明：次弯曲影响剥离应力的大小;弯曲刚度越大,次弯曲越小;斜削有助于减小次弯曲。     

光栅式长度仪表示值误差检定系统

介绍了光栅式长度仪表示值误差检定系统的基本工作原理以及关键技术的解决。本系统具有测量精度高、重复性好、智能化、操作简单、用户可自由扩展等优点。