含裂纹金属薄板的断裂韧度与剩余强度研究

为了探究影响含裂纹铝合金薄板材料断裂韧度、剩余强度的几何因素以及韧性材料的断裂机理,对典型航空铝合金2524-T3薄板,采用不同宽度、不同初始裂纹长度的中心裂纹板试样进行试验,测定材料的K-R阻力曲线,确定平面应力断裂韧度Kc和表观断裂韧度Kapp.试验结果表明:对于薄板结构,K-R阻力曲线与板宽相关;试件宽度、初始裂纹长度对断裂韧度和表观断裂韧度的确定都有影响,且板宽度的影响较大.基于上述结论,推荐两种可同时反映韧性材料断裂中的净截面屈服效应和韧性撕裂过程的剩余强度预测方法.     

直升机起飞性能试飞方法研究

当直升机可用功率不足以维持地效外悬停时,直升机可以利用地面效应增速至一定前飞速度完成起飞。研究了地面效应和前飞速度对直升机剩余功率的影响,阐述了利用剩余功率进行有地效起飞的原理。介绍了3种有地效起飞方式,并使用水平加速—定速爬升法进行了起飞性能飞行试验,得到了水平越障距离随爬升速度的变化曲线,对飞行试验结果进行了分析,得到了有益的结论。     

直升机运输效能试飞技术研究

对直升机运输效能进行了理论分析,给出了直升机各项运输效能指标的计算方法。利用试验机进行了直升机运输效能试飞,最后给出了直升机各项运输效能指标的飞行试验结果。对于后续的直升机运输效能试飞和直升机运输效能评估等工作具有重要的参考价值。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

考虑输入饱和与姿态角速度受限的航天器姿态抗退绕控制

 针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。     

大型枢纽机场中转水平评估研究

为了有效评估我国枢纽机场的中转水平,全面掌握枢纽机场发展中所面临的问题,构建了大型枢纽中转水平评估模型,并以中美欧三个国家和地区典型的大型枢纽为例进行实证分析。研究表明,与美国和欧洲大型枢纽的中转水平相比,我国大型枢纽的中转水平仍有很大差距;我国国内中转航班的中转水平远远低于美国,国内国际互转航班的中转水平与美国相当,国际转国际航班的中转水平高于美国;与欧洲三大国际枢纽的中转水平相比,我国北京首都机场与国际相关的水平中转仍有所不足。     

二元双喉道射流推力矢量喷管流动参数影响的数值研究

采用数值模拟方法研究了不同流动参数对二元双喉道射流推力矢量喷管(Dual-throat fluidic Thrust-vectoring Nozzle,DTN)内流特性和推力矢量控制效果的影响。结果表明,DTN在非推力矢量情况下,NPR在3~4范围时,推力系数较大,达到0.968,而流量系数较小,仅为0.93;NPR再增大,推力系数迅速下降。在推力矢量情况下,落压比一定时,随着次流流量比的增加,推力矢量角增加,而流量系数、推力系数、推力矢量效率减小;次流流量比一定时,随着落压比的增加,推力矢量角减小,系统推力系数先增加后减小,流量系数略微增加。     

结构隔绝内-外空间的流-热-固耦合仿真应用

为验证和指导高速飞行器的防隔热设计,准确地模拟气动热产生的热量穿透防隔热材料进而影响舱内温度空间分布和时间变化的过程,研究了一种同时求解机体外流场及气动热、机体结构传热及舱内流场温度场仿真计算方法,其中的传热方式包括热传导、热对流及热辐射。采用两套计算模型、两种求解器、一个数据交换文件的计算结构,构建了一种针对流场-热-结构的多场耦合分析方法,实现了对固体隔绝内外流场温度动态变化问题的仿真分析。最后通过计算实例验证了整套计算方法,得到的飞行器舱内温度变化特性能够用于指导高速飞行器的防隔热设计。     

小展弦比飞翼布局新型嵌入面航向控制特性研究

在小展弦比飞翼布局机翼外侧上/下表面分别设计了一组中等后掠角嵌入面,并对其跨声速时的航向控制效果及其流动机理进行了风洞试验和数值模拟研究。计算和试验结果表明,上嵌入面可在小迎角范围通过轴向力和侧向力的共同作用提供稳定的偏航力矩,实现航向控制;当α6°时,由于嵌入面逐渐处于前缘涡的影响范围内,在前缘涡的吸力作用下,嵌入面航向控制效果迅速下降,直至失效,且进行航向控制时存在不利的滚转耦合;下嵌入面可在全迎角范围内提供稳定的偏航力矩,实现航向控制;通过在小迎角范围内使用上嵌入面,α6°时使用下嵌入面,不仅可在全迎角实现航向控制,且不影响飞机的隐身性能。