基于灰色多层次评价方法的供应商评价

供应商选择是企业发展的重要决定因素之一。从企业整体发展的角度,建立了经营发展能力、合作意愿、企业形象三个方面的供应商评价指标体系,针对评价信息的灰色性,提出了供应商评价的灰色多层次评价方法,并通过一个算例说明了该方法的应用,为企业选择供应商提供了简单、易行的评价方法。     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

闭链空间机械臂抓持载荷基于积分滑模的模糊自适应控制

讨论了载体位置、姿态均不受控制情况下,漂浮基闭链双臂空间机器人抓持系统的动力学建模与控制问题.利用拉格朗日方法和牛顿-欧拉法,分别建立了双臂空间机器人及抓持负载的动力学模型,并结合漂浮基空间机器人固有的线动量和角动量守恒动力学特性及闭合链约束几何关系,获得了抓持系统合成动力学方程.以此为基础,考虑到闭链双臂空间机器人系统结构的复杂性及某些参数的变动性,根据模糊控制理论和Lyapunov稳定性理论,设计了系统参数不确定情况下该抓持系统基于积分滑模面的力/位置模糊自适应协调控制方案,从而达到对抓持负载位置与所受内力的双重控制效果.系统数值仿真证明了控制方案的有效性与精确性.     

基于扩展卡尔曼滤波的动量轮故障检测方法

 动量轮作为卫星姿态控制系统的关键执行部件,对其故障检测对维持卫星的正常运行具有重要意义。首先对动量轮系统的故障进行分析,在建立动量轮线性离散状态空间模型的基础上,把动量轮的故障检测作为时变参数系统的跟踪来处理,将动量轮的模型参数作为扩展的状态空间中的状态量,使得动量轮物理模型参数与状态空间中的状态量有对应关系,通过在扩展了的状态空间上采用扩展的卡尔曼滤波,完成时变参数的跟踪。然后,将离散空间的状态量变换回连续空间中,利用物理参数与状态量的对应关系,实现对动量轮物理参数的跟踪。此方法物理意义明确,为系统的物理参数提供了定量的估计值,为进一步诊断故障原因提供了良好的基础。数值仿真表明,此方法能够通过同时检测多个故障参量,实现故障的检测并满足卫星实时性要求。     

基于复杂型面薄壁零件成形的电铸试验研究

 在航空、航天领域存在诸如风洞喷管、波导元件和叶片电极等异型薄壁零件,采用常规加工方法对这些薄壁零件进行加工时存在着难加工的问题,利用一种新型的电铸技术——阴极平动式游离粒子辅助磨擦电铸技术对其进行直接成形加工。在电铸过程中,阴阳极之间添加不导电的游离粒子,随着阴极的不断运动,游离粒子能够周期性地对电沉积层产生磨擦、抛光、挤压作用,以此来提高表面质量,强化电铸层。与传统电铸技术所制备的电铸镍层进行了对比试验,试验结果表明：游离粒子辅助磨擦电铸技术能够获得表面光亮、平整电铸层;电铸层（200）晶面的衍射强度明显降低,（111）和（220）晶面的衍射强度显著提高;电铸层的机械性能也得到了明显的改善,显微硬度和抗拉强度比传统电铸工艺提高了一倍左右。以此为基础,成功制备了复杂型面叶片阴极,其显微硬度和表面粗糙度都得到了明显改善。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

电火花线切割加工中放电间隙电压变化特性

电火花线切割加工时工具(电极丝)和工件之间的放电电压是对放电加工过程进行实时检测的重要参数.本文在理论分析的基础上,采用正交试验设计,应用极差分析法和方差分析法定量研究了高速走丝电火花线切割加工中放电间隙电压量的变化特性与加工中峰值电流、工件厚度及切割方向之间的关系.研究的结果为准确检测高速走丝电火花线切割加工状态提供了依据.     

机载液冷源系统热特性仿真实验研究

大功率的航空机载电子设备会存在超温问题,相比于风冷,采用液冷源对设备进行冷却具有更好的散热效果,因此需要对液冷源系统进行热特性仿真计算。以某型机载液冷源为例,建立其主要部件（包括储液箱、齿轮泵、散热器等）的传热理论数值计算模型,仿真分析-40~40 ℃温度工况下的系统热特性,并通过状态机编程实现超温情况下的温控仿真。结果表明：该型机载液冷源系统在典型工况下温度指标基本满足冷板进口温度（5~30 ℃）的技术指标要求;在系统温度上下偏值较大的情况下,采取提高风机转速或打开冲压空气口的控制方法,可明显改善该问题且冷板温度基本控制在 5~15 ℃范围内。     

可压缩多介质流动问题的高精度数值模拟方法

在可压缩流动问题的数值模拟领域,激波的高分辨率计算已取得重要进展.但是包含物质界面的可压缩多介质流动的数值模拟还存在诸多数值挑战,主要表现为界面处数值耗散过大和非物理振荡等问题.界面处流体性质的不连续性是造成可压缩多介质流动问题物理建模与数值方法困难的主要原因.为了建立一套高效的可压缩多介质流动问题的高精度数值模拟方案...