基于Patran/Nastran 和Hypersizer的复合材料后机身加筋结构形式选择分析

针对复合材料后机身加筋壁板构型选择问题,采用有限元前后置处理软件Patran建立有限元模型,使用有限元分析软件Nastran进行初步分析,利用复合材料结构分析与优化软件Hypersizer进行结构形式的优化计算分析,优选出后机身壁板最佳结构形式。通过计算分析,得出有意义的工程经验。     

跨声速风洞全模颤振试验悬浮支撑系统

介绍了用于CARDC的2．4m跨声速风洞全模颤振试验的悬浮支撑系统的组成、试验装置的结构及其特点、控制算法等。给出了风洞调试试验结果,并进行了简要讨论。试验结果表明,研制的悬浮支撑系统具有强度高,对模型的浮沉和滚转控制能力强等特点。     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

可靠性分析在航空复合材料结构上的应用及展望

基于概率统计的可靠性分析研究对于航空复合材料结构有着重要的意义,一是航空结构尤其是民航结构的安全性要求极高,需要尽可能地预测或判断发生故障的可能性;二是复合材料的变异因素较多,采用传统设计导致折减系数较高。目前复合材料结构设计仍以安全系数的方法来保证结构的可靠性,在此过程中并不进行正式的风险评估,而基于概率的可靠性分析则设定一个可靠性目标来代替安全系数,但它需更成熟的概率统计方法以及大量的样本数据,所以只能作为传统结构设计的补充,在安全裕度不足时进行风险预测。论述了航空复合材料可靠性概率分析的历史演变、意义、主要理论方法以及一般步骤等内容,同时对复合材料结构的可靠性分析的未来进行了展望,为复合材料可靠性分析的发展和研究提供一定的参考。     

基于响应面法的短距/垂直起降飞机近地面升力损失

建立了短距/垂直起降(S/VTOL)飞机近地面升力损失的流场计算模型.通过数值模拟得出特定升力布局的飞机近地面状态各工况的升力损失.采用响应面法获得了飞机升力损失关于喷管落压比（NPR）、来流速度及飞机高度的2阶响应曲面函数及显著影响飞机升力损失的关键因素.并分析了喷管落压比、来流速度及飞机高度对飞机升力损失的交互影响作用,优化得出给定工况范围内升力损失最小的工作点.研究表明:仅考虑单因素影响时,升力损失随高度、落压比的增大而减小,随来流速度的增大而增大;考虑两因素交互作用时,高度与落压比及来流速度与落压比对升力损失存在交互影响,而高度与来流速度对升力损失无交互影响;优化获得的升力损失最小的工作点是飞机距地面高度为9D（D为喷管直径）、喷飞机高度为3、来流速度为0m/s,此时的升力损失为1.3%.      

过冷大水滴规章对结冰探测系统设计的影响

过冷大水滴规章提高了飞机在结冰条件下飞行的安全等级,将会对结冰探测系统的设计产生一定影响.本文概述了附录O过冷大水滴结冰条件,并对附录O第Ⅰ部分大气结冰条件进行了浅析;分析了FAR25.1420过冷大水滴结冰条件对结冰探测系统设计的影响,并提出符合相关要求的结冰探测方式;指出了对于目前申请在结冰条件下飞行的合格审定的最大起飞重量小于60 000磅或具有可逆飞行控制系统的飞机,按照FAR25.1420 (a)(1)的要求进行审定是一个较为合适的选择.此外,还给出了一种符合FAR25.1420要求的结冰探测系统方案.     

教练机研发能力建设

主战装备是赢取战争的先决条件,适应未来作战环境和作战任务的教练机是发挥主战装备战斗力的基础。本文旨在通过对教练机研发能力建设现状、存在问题及发展思路进行分析,全方位提升教练机研发能力,从而提高教练机研制质量、缩短研制周期,降低全寿命期费用。     

Performability analysis of avionics system with multilayer HM/FM using stochastic Petri nets

The integrated modular avionics (IMA) architecture is an open standard in avionics industry, in which the number of functionalities implemented by software is greater than ever before. In the IMA architecture, the reliability of the avionics system is highly affected by the software applications. In order to enhance the fault tolerance feature with regard to software application failures, many industrial standards propose a layered health monitoring/fault management (HM/FM) scheme to periodically check the health status of software application processes and recover the malfunctioning software process whenever an error is located. In this paper, we make an analytical study of the HM/FM system for avionics application software. We use the stochastic Petri nets (SPN) to build a formal model of each component and present a method to combine the components together to form a complete system model with respect to three interlayer query strategies. We further investigate the effectiveness of these strategies in an illustrative system.     

Passive inter-modulation scattering analysis of reflector considering contact nonlinearity

 Passive inter-modulation (PIM) is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform (FFT), we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.     

高Q 腔法与准光腔法用于毫米波段室温介电性能测试比对研究

介绍了用于毫米波段的介电性能测试的高Q腔法和准光腔法的原理及物理模型,并分别对其进行了仿真分析,建立了相应的测试装置,进行了空腔和石英玻璃的测试.结果表明,准光腔法要比高Q腔法在品质因数、可分辨的频点、样品尺寸、测试精度等方面更有优势.