A recursive multiple model approach to noise identification

Correct knowledge of noise statistics is essential for an estimator or controller to have reliable performance. In practice, however, the noise statistics are unknown or not known perfectly and thus need to be identified. Previous work on noise identification is limited to stationary noise and noise with slowly varying statistics only. An approach is presented here that is valid for nonstationary noise with rapidly or slowly varying statistics as well as stationary noise. This approach is based on the estimation with multiple hybrid system models. As one of the most cost-effective estimation schemes for hybrid system, the interacting multiple model (IMM) algorithm is used in this approach. The IMM algorithm has two desirable properties: it is recursive and has fixed computational requirements per cycle. The proposed approach is evaluated via a number of representative examples by both Monte Carlo simulations and a nonsimulation technique of performance prediction developed by the authors recently. The application of the proposed approach to failure detection is also illustrated     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。     

六喷管超音速引射器性能的理论分析和实验研究

对某一定尺寸的六喷管超音速引射器进行气动性能的实验研究。结果表明：随着主次流压比Ｐ＊ｐ／Ｐ＊ｓ增加，引射系数及修正引射系数下降；当引射系数增加时，混合管动量修正系数Ｋｍ下降，但主喷管流量系数μ变化不大。对上述工况进行理论计算的结果与实验数据符合良好。     

Tracking in clutter with nearest neighbor filters: analysis andperformance

The measurement that is “closest” to the predicted target measurement is known as the “nearest neighbor” (NN) measurement in tracking. A common method currently in wide use for tracking in clutter is the so-called NN filter, which uses only the NN measurement as if it were the true one. The purpose of this work is two fold. First, the following theoretical results are derived: the a priori probabilities of all three data association events (updates with correct measurement, with incorrect measurement, and no update), the probability density functions (pdfs) of the NN measurement conditioned on the association events, and the one-step-ahead prediction of the matrix mean square error (MSE) conditioned on the association events. Secondly, a technique for prediction without recourse to expensive Monte Carlo simulations of the performance of tracking in clutter with the NN filter is presented. It can quantify the dynamic process of tracking divergence as well as the steady-state performance. The technique is a new development along the line of the recently developed general approach to the performance prediction of algorithm with both continuous and discrete uncertainties     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．     

某型飞机机翼Ⅱ梁框检修周期的计算

本文建立某型飞机Ⅱ梁框结构裂纹形成寿命NP 与裂纹扩展寿命N P 之间的可靠度模型 ,将安全寿命设计与损伤容限设计原理有机结合 ,计算了在给定结构可靠度下该型飞机机翼Ⅱ梁框的检修周期     

铝合金薄板焊接热裂敏感性探索

探讨了用钨极氩弧焊焊接铝合金ＬＹ１２ＣＺ及ＬＹ１２Ｍ薄板时其热裂纹的变化规律，并分析了焊接工艺参数及填充材料对热裂纹的影响。试验结果表明，选择合适的工艺参数和填充材料可以明显提高该类合金的抗裂性能。     

大迎角三角翼旋涡运动及其破碎特性的数值研究

从流体力学的基本方程出发，利用Ｈａｌｌ的涡核准柱假设，导出反映涡核运动的Ｎ－Ｓ方程。采用差分方法计算旋涡流场，进而分析三角翼上前缘分离涡的运动特点及其破碎机下。从计算结果可以看出，旋涡的轴向速度向下游逐渐下降，且涡心处于降较快，外缘下降较慢，反映了粘性作用自涡心外缘逐渐下降的特点；涡核外缘的径向速度开始为负，说明开始阶段有流体流入涡核，随着旋涡向下游运动，径向速度有所增加，到一定位置后增加迅速，说     

点焊质量模糊控制系统研究

简要介绍了电阻点焊单片机微机模糊控制原理，确定了点焊模糊控制算法，分析了点焊模糊控制系统的硬件结构和软件设计。实验结果表明，该控制系统能够有效实现点焊质量的模糊控制，具有较强的自适应特性，可用于电阻焊智能制造。     

基于BP网络的热工过程模型辨识方法

主要研究了人工神经网络在辨识火电厂热工过程模型中的应用，利用Visual C^ 语言构造BP神经网络,提出了把BP网络权值转换为传递函数的方法，针对火电厂常见的热工过程，不用人为加入特殊的激励信号，只利用现场生产中自然存在的扰动信号进行辨识试验，试验结果准确可靠。