基于自然激励技术的颤振边界预测

为了预测紊流激励条件下机翼的颤振边界,基于自然激励技术提取紊流响应的自由衰减信号,采用矩阵束方法识别模态参数,最后通过Z-W(Zimmerman-Weissenburger)方法计算稳定性判据,拟合判据变化曲线并外推颤振边界.对平板机翼模型进行了数值仿真分析,对单独机翼模型风洞颤振试验数据进行了计算.结果表明:采用自然激励技术与矩阵束方法能够较准确地识别紊流激励响应的模态参数,频率识别误差小于6％,阻尼比识别误差小于30％,结合Z-W方法能够在较低风速较早地预测颤振边界,有助于提高试验的安全性.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

荧光油膜技术及其在流动控制中的应用（英文）

研究了运用荧光油膜技术测量全局表面摩擦应力的方法,引入金字塔迭代技术和模拟演化技术提出了该方法的优化求解算法,并通过平板绊线实验对以上方法进行了验证。以此为基础,通过两个典型的流动控制实验进一步探讨了荧光油膜技术在流动控制中的应用,其中包括采用不同参数锯齿形转捩带控制平板流动转捩的被动流动控制实验和不同激励频率下的后台阶零质量射流主动流动控制实验。以上实验测量结果表明,荧光油膜方法能够有效帮助理解流动机理并可用于评估流动控制策略。     

直升机起飞性能试飞方法研究

当直升机可用功率不足以维持地效外悬停时,直升机可以利用地面效应增速至一定前飞速度完成起飞。研究了地面效应和前飞速度对直升机剩余功率的影响,阐述了利用剩余功率进行有地效起飞的原理。介绍了3种有地效起飞方式,并使用水平加速—定速爬升法进行了起飞性能飞行试验,得到了水平越障距离随爬升速度的变化曲线,对飞行试验结果进行了分析,得到了有益的结论。     

直升机运输效能试飞技术研究

对直升机运输效能进行了理论分析,给出了直升机各项运输效能指标的计算方法。利用试验机进行了直升机运输效能试飞,最后给出了直升机各项运输效能指标的飞行试验结果。对于后续的直升机运输效能试飞和直升机运输效能评估等工作具有重要的参考价值。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

二元双喉道射流推力矢量喷管流动参数影响的数值研究

采用数值模拟方法研究了不同流动参数对二元双喉道射流推力矢量喷管(Dual-throat fluidic Thrust-vectoring Nozzle,DTN)内流特性和推力矢量控制效果的影响。结果表明,DTN在非推力矢量情况下,NPR在3~4范围时,推力系数较大,达到0.968,而流量系数较小,仅为0.93;NPR再增大,推力系数迅速下降。在推力矢量情况下,落压比一定时,随着次流流量比的增加,推力矢量角增加,而流量系数、推力系数、推力矢量效率减小;次流流量比一定时,随着落压比的增加,推力矢量角减小,系统推力系数先增加后减小,流量系数略微增加。     

结构隔绝内-外空间的流-热-固耦合仿真应用

为验证和指导高速飞行器的防隔热设计,准确地模拟气动热产生的热量穿透防隔热材料进而影响舱内温度空间分布和时间变化的过程,研究了一种同时求解机体外流场及气动热、机体结构传热及舱内流场温度场仿真计算方法,其中的传热方式包括热传导、热对流及热辐射。采用两套计算模型、两种求解器、一个数据交换文件的计算结构,构建了一种针对流场-热-结构的多场耦合分析方法,实现了对固体隔绝内外流场温度动态变化问题的仿真分析。最后通过计算实例验证了整套计算方法,得到的飞行器舱内温度变化特性能够用于指导高速飞行器的防隔热设计。     

三角翼大幅度俯仰运动非定常测压实验洞壁干扰研究

用两个几何相似大小不同的前缘后掠角 70°三角翼模型在闭口风洞中进行正弦俯仰振荡实验 ,测量三角翼模型吸力面动态压力以及风洞洞壁上最佳测压点的非定常压力。实验表明 ,三角翼模型在正弦俯仰振荡时 ,其吸力面动态压力以及洞壁上最佳测压点的非定常压力与三角翼模型上的法向力一样呈现迟滞环现象。模型展宽比 (翼展 /洞宽 )增大 ,迟滞环幅度增大 ,动态压力绝对值增大。无论上仰或下俯 ,模型展宽比 (翼展 /洞宽 )增大 ,三角翼模型吸力面涡破碎位置离前缘较远。风洞顶壁上最佳测压点非定常压力迟滞环方向与风洞底壁上对应最佳测压点非定常压力迟滞方向相反。风洞洞壁上最佳测压点非定常压力变化频率与模型正弦俯仰振荡频率一致 ,各最佳测压点间呈现时间延迟现象。     

不同压力环境下竖直平板表面自然对流散热实验

飞行器从地面上升到太空的过程中所经历的大幅度环境参数变化,会导致飞行器及机载设备出现"超热"、"过冷"和"热分层"等现象。为得到不同环境压力下的关键参数--自然对流换热系数,本文搭建了一个能提供不同气压和环境温度的封闭试验舱,对在不同压力环境(0.0001,0.01,0.1,0.2,0.5,1,10,50 kPa和常压)下几种固定加热量(75,150,300 W/m²)的竖直平板散热进行了实验研究,通过对辐射散热和对流散热的分析比较,获取不用工况下气体的对流换热系数。结果表明:对流换热系数在绝对气压小于1 kPa时非常小,可以视作为0;在绝对气压大于1 kPa时,对流换热系数随压力的升高呈2次方增加;通过对环境物理参数的无因次化处理,得到的准则式方程可用于1~100 kPa的环境压力。