High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

飞机超差结构疲劳寿命量化评定

依据美机实用手册介绍的疲劳寿命S-N方程,对超差结构疲劳寿命推导出了一个量化评定方程。并应用该方程对一些典型结构超差形式具体地进行了疲劳寿命量化评定。实践证明,用本文介绍的方法对超差结构疲劳寿命进行定量评定,不仅简捷明快,而且结果可靠。     

光敏元件与光传感器的市场动态和发展

介绍了光敏元件与光传感器技术的发展及在国民经济和军事领域中的重要怍用；分析了国内外光电子产业的市场动态与发展趋势；论述了我国光电子产业面临的机遇和挑战。     

激光外差干涉仪光电信号处理方法及特点

叙述和分析了外差激光干涉光电信号处理主其特点，指出了它们各自的应用范围，同时介绍了一处新型的光电信号处理方法，它不仅使外差干涉仪用于动态测量，而且可以同时实现高分辩率测量 。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

波导分支线定向耦合器计算方法

利用模匹配方法和网络理论分析计算了一种卫星天线系统中常用的波导分支线定向耦合器,计算结果与实验结果非常吻合。该方法为波导分支线定向耦合器提供一种有力的设计手段。它可直接用于设计Ku 波段通信卫星天线的波束形成网络,也可以用来设计各种耦合度的波导分支线定向耦合器。     

Optimal multiple level decision fusion with distributed sensors

A data fusion model consisting of several levels of parallel decision fusions is considered. Global optimization of such a model is discussed to obtain the fusion rules for overall optimal performance. The reliability analysis of the proposed model is carried out to establish its superiority over the existing parallel and serial fusion models