Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

柔性热膜剪应力传感器水下测量温度修正

柔性热膜微传感器应用于流体壁面剪应力测量时,流体温度对传感器输出有很大影响,因此有必要对工作在非标定温度下的传感器输出信号进行修正补偿。重点研究了水下测量时传感器输出与水温的关系以及温度修正方法。通过分析传感器过热比和流体物理性质与温度的相关性,建立了流体温度与传感器过热比和标定系数的函数关系。在此基础上,提出了一种用于水下剪应力测量的温度修正方法,可以有效减小水温对传感器输出的影响。经实验验证,该方法可以使工作在25℃、28℃水温环境下的传感器输出值与其20℃标定值的相对误差从23．7％和37．1％回落到0．82％和0．83％。     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。     

轮胎和缓冲支柱压力对摆振特性的影响

阐述了摆振分析的基本思路,分析了轮胎和缓冲支柱压力对摆振特性的影响,并结合某起落架计算比较了不同轮胎及缓冲支柱压力下的摆振特性。研究表明:当两者压力降低时,摆振临界阻尼均减小,有利于防摆;反之,摆振临界阻尼均增大,不利于防摆;但在两者压力变化的百分比相同的情况下,轮胎压力变化比缓冲支柱压力变化对摆振特性的影响更明显。     

复合材料夹层结构在航空领域的应用

详细描述了复合材料夹层结构及几种常用芯材的性能特点,综合分析了复合材料夹层结构在飞机上的应用案例,对各种夹层结构芯材成型工艺的重点、难点进行了探析,得到了复合材料夹层结构的性能概况及使用工艺要求,可为复合材料夹层结构设计、制造提供参考。     

飞行载荷发展综述

飞行载荷设计是飞行器设计的一个重要组成部分,是连接总体气动设计和结构强度设计的桥梁。本 文从飞行载荷设计所需要遵循的规范、飞行载荷的设计方法、严重载荷选取、飞行载荷的验证等方面对飞行器 飞行载荷设计的发展历程进行了回顾,并对未来飞行载荷的发展方向进行了展望。     

脑机接口等新兴科技对传统外科重建肢体功能的启示

肢体瘫痪是人类致残的最主要原因,仅脑卒中等造成的偏瘫在我国就达两千余万患者,长期“无医可治”。中国原创的左右颈七神经交叉移位,将瘫痪上肢神经换接到同侧健康大脑,不仅偏瘫肢体功能显著恢复,更进一步更新发展了传统脑科学理论。然而对于脊髓损伤后肢体瘫痪或严重肢体残缺患者来说仅依靠医学方法尚不能有效治疗。近年来,围绕传统脑电技术发展而来的脑机接口等新兴技术衍生出的交叉学科逐渐兴起,拥有能够解决医学遗留难题的潜能,在国内外掀起一番热潮。作为国家战略需求,研究者应当抓住机会,加大力度支持跨领域、多学科融合,共同研发肢体功能重建新方案,实现新兴科技与中国原创技术融合的再次突破。