基于环形切割器的串联战斗部隔爆结构的优选

硬质聚氨酯具有刚度小、材质松散、易于吸收爆炸能量的特点,是一种很好的隔爆材料。为了设计环形切割器与后级随进战斗部之间的隔爆装置,利用LS-DYNA分别进行了圆柱型、圆锥型、球缺型3种聚氨酯隔爆体的数值模拟研究。通过研究得出结论:球缺型结构既节省材料,又可以更有效地降低前级产生的冲击波对后级战斗部的影响。该结论有助于带环形切割器串联战斗部的隔爆设计。     

改进层次聚类法在复合材料敲击检测中的应用

伴随复合材料的迅速发展,其在航空航天方面的应用也日益普遍,但因复合材料的各向异性,在制造过程中会导致某些缺陷的产生。敲击检测作为一种实时原位的无损检测,在复合材料的检测中效果明显。由于敲击检测尚未找到合理的数据处理方法,所以其应用范围受到限制。从解决敲击检测数据处理方法的角度出发,提出将改进层次聚类法应用于敲击检测中,并在应用实例环节对该方法进行了应用,通过实验结果对比,表明改进层次聚类方法可以解决敲击检测数据处理的问题。     

Calculations and observations of solar particle enhancements to the radiation environment at aircraft altitudes.

Solar particle events can give greatly enhanced radiation at aircraft altitudes, but are both difficult to predict and to calculate retrospectively. This enhanced radiation can give significant dose to aircrew and greatly increase the rate of single event effects in avionics. Validation of calculations is required but only very few events have been measured in flight. The CREAM detector on Concorde detected the event of 29 September 1989 and also four periods of enhancement during the events of 19-24 October 1989. Instantaneous rates were enhanced by up to a factor ten compared with quiet-time cosmic rays, while flight-averages were enhanced by up to a factor six. Calculations are described for increases in radiation at aircraft altitudes using solar particle spectra in conjunction with Monte Carlo radiation transport codes. In order to obtain solar particle spectra with sufficient accuracy over the required energy range it is necessary to combine space data with measurements from a wide range of geomagnetically dispersed, ground-level neutron monitors. Such spectra have been obtained for 29 September 1989 and 24 October 1989 and these are used to calculate enhancements that are compared with the data from CREAM on Concorde. The effect of cut-off rigidity suppression by geomagnetic activity is shown to be significant. For the largest event on record on 23 February 1956, there are no space data but there are data from a number of ground-level cosmic-ray detectors. Predictions for all events show very steep dependencies on both latitude and altitude. At high latitude and altitude (17 km) calculated increases with respect to cosmic rays are a factor 70 and 500 respectively for 29 September 1989 and 23 February 1956. The levels of radiation for high latitude, subsonic routes are calculated, using London to Los Angeles as an example, and can exceed 1 mSv, which is significantly higher than for Concorde routes from Europe to New York. The sensitivity of the calculations to spectral fitting, geomagnetic activity and other assumptions demonstrates the requirement for widespread carriage of radiation monitors on aircraft.     

乌鲁木齐塔台管制区的冲突点及调配方法

一、管制调配预案的制定方法管制调配预案是空中交通管制员在遵循有关的管制单位之间的管制协议,空中交通管制的政策法规的前提下,以保障空中和地面的航空器安全、有序、快速、顺畅的运行为目的,根据进港航空器的预计到达时间、出港航班的预计起飞时间、当前的空中交通情况以及     

洗出滤波算法在飞行模拟器中的应用

介绍了六自由度运动平台的洗出滤波算法及其在飞行器地面滑跑阶段的实现。根据飞行仿真模块的输出,通过坐标变换、比例限制、信号洗出和滤波等,形成运动平台的驱动信号。该算法在不增加系统硬件的前提下,充分利用液压缸现有行程,逼真地模拟飞机俯仰、滚转、偏航、升降、纵向和侧向平移运动。     

高血压鉴别诊断专家系统HEDDS的不精确推理算法

本文在分析著名的医学专家系统MYCIN不精确推理算法的基础上,提出了一种易于在微型计算机上实现的简便有效的不精确推理算法,并就其一些性质进行了讨论。     

二维跨音速流动计算的显式多步有限面积方法

本文按Jameson等的思路,采用新的人工粘性项系数,建立显式多步有限面积方法,给出绕NACA0012翼型和RAE2822翼型跨音速流动的计算结果。     

成组技术中计算机辅助零件分类方法的探讨

成组技术是有效实现CAD/CAM的基础之一,是提高多品种、中小批量生产水平的重要手段。本文提出了在成组技术中应用模糊数学理论进行计算机辅助零件分类的新方法,并对回转零件进行了分类试验,取得了满意的结果。采用这种方法,不需要对零件进行编码,可以对零件相似性进行定量分析,使得零件分类更具有柔性,为成组技术中零件分类提供了新的方法。     

高职院校移动学习资源的设计

基于移动学习资源应用现状,结合移动学习相关理论与技术,在高职院校课程的移动学习资源开发上,构建了移动学习资源开发的基本模型,设计了移动学习资源开发标准和原则,并以"民航机场地面服务"课程为例,详述了高职院校移动学习资源的设计与实施.     

循环电载荷下大功率LED金引线疲劳断裂寿命预测

随着大功率发光二极管（LED）在照明领域的普及与广泛应用,可靠性逐渐成为研究的重点。大功率LED封装器件中金引线疲劳断裂失效一直是制约其可靠性的重要因素。通过针对大功率LED封装器件中的金引线力学仿真与功率循环试验相结合的方法,首先确定循环电载荷条件下该型LED的主要失效原因为金引线疲劳断裂,其次提出基于电流加速模型的加速因子提取方法和基于应变幅值的Coffin-Manson解析寿命预测方法,最终完成对LED金引线疲劳断裂寿命的预测和试验验证。研究结果表明:所提方法具有较高的寿命预测精度,可以满足大功率LED封装器件可靠性快速、准确评估的要求。