Beam-pointing error compensation method of phased array radar seeker with phantom-bit technology

A phased array radar seeker (PARS) must be able to effectively decouple body motion and accurately extract the line-of-sight (LOS) rate for target missile tracking.In this study,the real time two-channel beam pointing error (BPE) compensation method of PARS for LOS rate extraction is designed.The PARS discrete beam motion principium is analyzed,and the mathematical model of beam scanning control is finished.According to the principle of the antenna element shift phase,both the antenna element shift phase law and the causes of beam-pointing error under phantom-bit conditions are analyzed,and the effect of BPE caused by phantom-bit technology (PBT) on the extraction accuracy of the LOS rate is examined.A compensation method is given,which includes coordinate transforms,beam angle margin compensation,and detector dislocation angle calculation.When the method is used,the beam angle margin in the pitch and yaw directions is calculated to reduce the effect of the missile body disturbance and to improve LOS rate extraction precision by compensating for the detector dislocation angle.The simulation results validate the proposed method.     

基于ARMA模型的空域容量评估方法研究

空域容量是空域管制服务保障能力的重要指标之一,其准确预测和评估对安排航班时刻、实施管制服务具有参考价值。根据管制员工作负荷的自相关增长规律,首次提出了基于自回归移动平均( Autoregressive moving average,ARMA)模型的空域容量评估方法。以国内西部某机场为例进行空域容量评估研究,通过仿真验证,ARMA模型很好地评估了空域容量,证明了方法的有效性。     

Estimation of ballistic coefficients of space debris using the ratios between different objects

This paper proposes a new method to estimate the ballistic coefficient (BC) of low earth orbit space debris.The data sources are the historical two-line elements (TLEs).Since the secular variation of semi-major axes is mainly caused by the drag perturbation for space objects with perigee altitude below 600 km,the ballistic coefficients are estimated based on variation of the mean semi-major axes derived from the TLEs.However,the approximate parameters used in the calcu lation have error,especially when the upper atmosphere densities are difficult to obtain and always estimated by empirical model.The proportional errors of the approximate parameters are cancelled out in the form of ratios,greatly mitigating the effects of model error.This method has been also been validated for space objects with perigee altitude higher than 600 km.The relative errors of esti mated BC values from the new method are significantly smaller than those from the direct estimation methods used in numerical experiments.The estimated BC values are used for the prediction of the semi-major axes,and good performance is obtained.This process is also a feasible method for prediction over a long period of time without an orbital propagator model.     

基于位移峰值信息的实时自适应分段速度估算方法

力/触觉再现技术是遥操作、飞行器仿真培训以及增强型虚拟现实等系统的有益补充。准确度高、噪声低且计算快速的速度估算是确保高效力/触觉再现系统实现的重要环节之一。从位移数据峰值信息出发,提出了一种自适应分段速度估算方法。相对现有的有限步长差分法在采样率较高时容易引入噪声分量和自适应回溯窗法在低速运动时需要较长计算时间等缺点,自适应分段法在确保估算准确度和光滑度的基础上同时具备计算快速的特性,从而能够满足力/触觉再现技术所需的准确性和实时性要求。文章最后建立了力/触觉再现实验系统,通过实验验证了该速度估算方法的有效性和快速性。     

广西高职教育与区域经济和谐发展的策略探讨

进入21世纪,广西高等职业教育在本区域经济发展的基础上取得了令人瞩目的成绩,但还存在着一些问题。文章针对这些问题,着重探讨了高职教育与区域经济和谐发展的策略,推动两者的良性互动。     

基于传感器协同技术的雷达搜索空域研究

多传感器协同是当代先进战斗机的重要技术特征.利用数据链、电子战系统、红外搜索跟踪系统提供的目标信息引导雷达对指定空域进行小范围搜索,可以增加雷达波束目标驻留时间,提高雷达探测距离.本文给出了在外部目标信息引导下雷达搜索空域确定方法,对各种传感器的引导精度进行了分析,确定了雷达相应的搜索空域.     

基于LPC2210微控制器的液晶显示系统设计

ARM处理器是目前公认的业界领先的32位嵌入式RISC微处理器.本文主要介绍了基于ARM的嵌入式微处理器LPC2210和LCM(液晶模块)组成的液晶显示电路的硬件设计和驱动程序流程.     

基于CATIA的三维标准件库开发

标准件是工程设计中重复使用最多的,为提高生产效率,使用CAA在VC6.0的开发环境下对CATIA标准件库进行开发研究,并初步建立了一个基于CATIA的三维标准件库框架.本系统采用ADO管理数据库数据,采用Access数据文件存储方式,提高了数据可操作性,降低了数据冗余度.它由程序读取数据库数据,建立模型,异于以往的参数化驱动建模方式.它解决了标准件的重复造型工作,提高了生产效率,而且其开发方法对后期设计有借鉴意义.     

机载光电跟瞄平台伺服系统中电流环的设计与仿真

主要叙述了机载光电跟瞄平台伺服系统中电流环的组成并对电流调节器这一关键环节的设计进行了重点分析,在MATLAB的环境下对建好的电流环模型进行了仿真.     

ObjectARX与MFC结合开发AutoCAD应用程序

介绍了MFC,一个基于Microsoft Visual C 环境下编程的程序框架,以及ObjectARX的基于Microsoft Visual C 语言环境下的AutoCAD二次开发软件包。讨论了如何将MFC与ObjectARX结合进行AutoCAD二次开发,如何在ObjectARX应用程序中使用MFC,如何选用动态链接方式、静态链接方式等有关的问题进行了详尽地论述。