基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

IEEE488总线在动量轮测试中的应用

叙述了资源卫星动量轮的一般结构和开环测试原理。详细介绍了应用ＩＥＥＥ４８８总线构成的动量轮开环性能自动测试系统。说明了这个自动测试系统的系统构成以及测试项目、测试流程和获得的测试结果。并据此提出这个系统在卫星研制工作中具有推广价值。     

过程体系结构

从系统论的观点出发，明确定义了过程工程领域的基本概念，定义了过程体系结构，采用了一个扩充的ＣＯＳＭＯＳ模型，以支持灵活的过程建模，并在此基础上讨论了过程的工程化支持。     

GPS定位数据在海洋一号卫星中的应用与比较

简要介绍了海洋一号卫星星载GPS接收机的定位原理、流程和应用，探讨了一种在轨定位结果的确认和互验方法．借助于卫星工具包软件(STK)，利用NASA网站公布的HY-1卫星两行根数(TLE)进行卫星轨道推算，生成星下点位置，并与相应时刻星载GPS接收机实测数据得到的星下点位置进行比较，由此得到两种方法定位结果之间的偏差，用实际在轨数据验证了两者的位置符合程度．     

空间光学遥感器主镜背部形状的选择

本文阐述了空间光学遥感器中主镜轻量化的必要性．对双凹、平背、单拱和双拱4种形状主镜在重力载荷下的变形进行了分析计算，得出了背部3点支撑方式下双凹主镜最优的结论，并进一步研究了3点支撑的双凹主镜面形变化RMS值随规一化支撑半径r／R的变化规律．     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

大气湍流光学长曝光像的数值计算

在介绍大气湍流光学长曝光像的两个模型——高斯模型(空间域模型)和统计平均光学传递函数模型(空间频率域模型)的基础上，推导两模型之间的关系与差别，并应用两模型数值计算了扩展目标通过大气的长曝光成像结果。此外，还应用高斯模型给出了自适应光学系统校正后的远场光斑。