整体壳段典型特征高效模块化编程技术

整体壳段为航天产品核心零部件，具有结构复杂、尺寸精度高、材料去除率大、工艺过程复杂、加工周期长等特点。在壳段数控加工过程中，存在编程难度大、重复工作量大、效率低及编程质量与编程人员能力水平密切相关等问题。为了适应高效、高可靠性的任务需求，依托成熟商用CAM软件，通过对整体壳段典型特征的分析，基于UG NX软件平台研究并开发了典型特征自动化编程模块，有效提高了加工程序的质量稳定性，并极大降低了工艺人员的编程操作量，提高了工艺设计效率。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

商务英语模糊语语境顺应性研究

商务英语是国际商务活动的重要语言载体。模糊语在商务英语中有着不可替代的语用功能。以商务活动中的内部沟通语境和对外沟通语境为视角,对在这两种语境下商务英语模糊语的应用规律进行分析研究,应用顺应性理论对其进行解释,阐明在实际应用中应遵循这些规律,做到＂内外有别＂。对准确使用商务英语,提高商务沟通效率以及促进商务英语的教学等方面都有重要的意义。     

碳纳米管阵列推力器放电特性的数值模拟研究

基于直接蒙特卡洛(DSMC)算法、浸入式有限元算法(IFE)、粒子云及蒙特卡洛碰撞(PIC-MCC)算法以及Ammosov-Delone-Krainov(ADK)隧穿电离模型建立了碳纳米管阵列推力器工质气体和CNT场电离过程的三维仿真模型。利用文献中的实验数据对本文仿真模型的有效性进行了验证,结果表明本文仿真模型与实验结果基本一致。针对碳纳米管阵列推力器的放电特性进行了研究,并重点分析了离子与原子碰撞过程对碳纳米管阵列推力器放电特性的影响。结果表明CNT可以极大地增强局部电场,稳态时场增强因子约为1308;与原子的碰撞使得离子在CNT附近更加集中,降低了局部电场,进而降低了其场增强能力。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

协同操作中单人训练系统模型研究

介绍了一个协同操作中单人训练系统的模型,并详细分析了模型的建立,最后给出了模型和算法描述,为其它协同操作系统提供了一个范例.     

线性时不变系统的完全跟踪控制器

从线性时不变系统的状态空间模型出发,借助于广义逆矩阵概念和相容线性方程组的最小范数解,从理论上推导了线性时不变系统的完全跟踪控制器方案。