基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

应用联合变换相关器的成像制导系统

提出了一种光电混合的成像制导系统，它采用光学联合变换相关器作为其主要的图像识别单元，利用计算机对识别结果进行判决和显示，并发出跟踪信号给导引头，从而实现制导。联合变换相关器是对光学图像信号进行并行处理的器件，实时识别性能强，精度高。此成像制导系统克服了传统的红外制导系统易受外界因素影响，实时处理能力差，误判率较高的缺点，具有并行处理速度快、信息吞吐量大、体积小等优点，应用前景广阔。     

航天器最优再入轨迹的选择分析

本文研究的目的是想获得具有最大有效载荷的航天器最优再入轨迹。返回段航天器的最大有效载荷等价于航天器离轨点所耗燃料质量与热防护系统（ＴＰＳ）质量之和达极小。文中把最大有效载荷的再入轨迹分三种情况作了分析：航天器ＴＰＳ质量不确定时，通过返回轨迹优化来获得航天器的最大有效载荷，并选择确定相应ＴＰＳ的质量；ＴＰＳ质量已确定时，通过再入轨迹优化来获得航天器的最大有效载荷；ＴＰＳ质量足够大时，通过多次穿越大气层来获得航天器的最大有效载荷。本文的结论可为航天器再入轨迹与ＴＰＳ的一体化选择提供思路。     

基于AT89C52的离散信号测量电路设计

介绍了离散信号测量与控制在反舰导弹雷达导引头自动测控系统中的重要性 ,给出了基于AT89C5 2单片机控制的离散信号测量电路的具体构成和工作原理     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

76°/40°双三角翼前缘涡破裂及其控制实验研究

流动显示结果表明,喷流能有效地推迟双三角翼前缘涡的破裂,且随着攻角的增大,前缘涡破裂位置逐渐推后,喷流极大地改善了大攻角情况下前缘涡的非对称破裂特性,能有效地克服可能出现的机翼的"摇滚"现象.另外,后缘喷流可以减弱乃至消除前缘涡混掺现象的发生,进而有利于飞行器的操纵.     

LabVIEW在直流低电压测量中的应用

以对数字纳伏表的测试为例,详细介绍了一种运用LabVIEW编制直流低电压自动检定程序,采集测试数据并进行分析和处理的方法。重点强调了在测控系统中运用LabVIEW编程的便捷性和高效性。     

一种脉冲液体流量标准装置主标准器的测量不确定度评定方法

介绍了一种活塞位移型体积管常数的测定方法、数学模型及其测量标准不确定度分量,并给出了不确定度评定实例和验证结果。     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。