P2P MMOG中一种基于事件分类的本地滞后技术

根据P2P MMOG中状态一致的要求提出一种基于事件分类的本地滞后技术。通过检测网络的负载状况动态调整关键事件的本地滞后时间,在状态一致和响应时间之间进行灵活折衷,并对非关键事件进行静态滞后,同时结合事件过时机制减少数据传输量。实验结果表明,该方法能有效减少游戏状态的回滚次数,降低游戏结点的处理开销,适合于P2P模式下MMOG的不同游戏终端需求。     

中心突扩燃烧室PIV实验研究

利用PIV技术对两种不同尺寸的中心突扩燃烧室在不同入口速度条件下的冷态流场进行了实验研究,测量并分析了流场结构与来流速度、突扩比、喷管收缩段等因素的关系。实验结果表明利用PIV技术能较好地获得高速条件下燃烧室二维速度场;对于不同突扩比的燃烧室,突扩面后的流场结构类似,但回流区的最大负速度与入口速度的比例关系不同;在喷管人口处,流场在此处重新形成旋涡,其直径较大,但强度相对较弱。     

直流低速风洞收缩段的数值模拟研究

采用商用软件FLUENT对双三次曲线和维辛斯基曲线这两种收缩段曲线进行了数值模拟,旨在通过仿真结果为低速风洞收缩段的设计选择一种较为合适的曲线。从流函数、静压、速度图中可以看见,收缩段曲线采用双三次曲线时各截面参数均匀,可以达到很好的收敛效果,通过本次数值模拟计算可为低速直流风洞的设计及优化提供了重要的依据。     

Ti6242合金微观组织差异及其演变对拉伸和疲劳性能影响

典型近α型钛合金Ti6242合金制备盘锻件的综合力学性能与其棒材原始微观组织特征密切相关。本研究选取具有明显微观组织特征差别的3种Ti6242钛合金棒材为研究对象,定量化评估不同Ti6242钛合金棒材锻造态、固溶态和固溶+时效态的微观组织差别和演变规律,并讨论棒材微观组织差别和演变对综合力学性能的影响。研究结果显示具有明显差别的不同棒材微观组织在经历相同的固溶和时效处理后,其初生α相体积分数差别趋于相近,而初生α相的尺寸分布和形状分布等微观组织特征仍保留差别;力学性能结果显示室温拉伸力学性能趋于近似,而低周疲劳和保载疲劳力学性能对微观组织特征较为敏感。对比不同特征组织和力学性能分析结果,具有细小非等轴状且没有明显取向集中分布初生α相的棒材原始组织有助于获得更好的疲劳性能。     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

光学压力敏感涂料测量技术综述

光学压力敏感涂料测量技术是一种新的测压技术,具有免接触、可连续大范围测量等特点,国外已广泛应用于风洞测量。文中介绍了PSP技术基本原理、测试系统的组成、特性参数的标定和使用该技术测量的方法及特点,并阐述了该技术的未来发展方向。     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

空调系统冷热源性能的评价

以西安市某办公大楼为例,借助软件DeST对该大楼供冷季和供暖季的空调动态负荷进行计算的基础上,根据目前冷热源配置状况的调查和该建筑空调负荷的特点,以及能源结构,充分考虑节能,提出了三种具有代表性的技术上比较合理的冷热源组合方案。通过比较各方案的一次能源利用率和能源转换方式的能耗指标,综合评价了各方案的节能潜力。     

基于单片机的过程控制系统设计

设计一个基于单片机的过程控制系统 ,并以温度控制为例 ,通过实验手段建立了控制对象的数学模型 ,完成系统PID参数整定 ,通过开放的数据通信 ,使用通用PC对过程进行监控 ,实现分散控制 ,集中管理的现代工业控制模式。还对模糊控制温度过程作了理论性探讨 ,并在MATLAB下进行仿真 ,为实际控制过程提供理论依据。     

星历误差对双星定位系统定位精度的影响

双星定位系统是我国自行研制开发的一种区域性卫星定位系统,其定位体制与 GPS 不同,并且其定位精度受到诸多因素的影响,其中星历误差的影响是不可忽略的因素。文中重点研究了星历误差对其定位精度的影响,并推导出了其数学误差模型,在一定条件下给出了其仿真结果,为分析其他误差因素对其定位精度的影响奠定了基础。