气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

螺旋锥齿轮齿面误差分析与自动反馈修正

基于齿面检测信息,识别并分析了齿面误差及其影响因素,推导出了机床运动参数与齿面误差的映射关系;开发了齿面误差自动识别系统来自动确定误差类型及机床运动参数修正项;建立了四轴联动数控铣齿机运动修正模型,通过数值优化计算实现了机床运动参数的自动修正,并经由测量加工网络完成了修正参数至数控机床的自动反馈.实验及应用表明,通过齿...     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope

In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen’s rough surface stochastic model and consistency transformation method, Reynolds equation of air supported gyroscope containing surface roughness information is established. Also effects of mathematical models of main machining errors on vortex torque are established. By using finite element method, the Reynolds equation is solved numerically and the vortex torque in the presence of machining errors and surface roughness is calculated. The results show that surface roughness of slit has a significant effect on vortex torque. Transverse surface roughness makes vortex torque greater, while longitudinal surface roughness makes vortex torque smaller. The maximal difference approaches 11.4% during the range analyzed in this article. However surface roughness of journal influences vortex torque insignificantly. The research is of great significance for designing and manufacturing air supported gyroscope and predicting its performance.     

Admission Control of VL in AFDX Under HRT Constraints

Avionics full duplex switched ethernet(AFDX) is a switched interconnection technology developed to provide reliable data exchange with strong data transmission time guarantees in internal communication of the spacecraft or aircraft.Virtual link(VL) is an important concept of AFDX to meet quality of service(QoS) requirements in terms of end-to-end message deadlines.A VL admission control algorithm in AFDX network under hard real-time(HRT) constraints is studied.Based on the scheduling prin-ciple of AFDX prot...     

交流阻抗谱法评价热障涂层的热腐蚀行为(英文)

本文利用交流阻抗这种无损检测的方法研究了热障涂层在质量分数为25%NaCl+75%Na2SO4混合盐体系中的热腐蚀行为。实验结果显示,热腐蚀条件下,在陶瓷层和粘结层界面处形成TGO层为混合氧化物层,成分为Cr2O3、(Ni,Co)(Cr,Al)2O4和NiO,其厚度增长符合抛物线规律。热障涂层在110个循环腐蚀之前时,TGO层的电阻值随其厚度的增加而增加;110个循环后,虽然TGO层的厚度还是在增加,但由于TGO层孔隙的增多而导致其电阻值有所下降。陶瓷层的电阻值随着陶瓷层中裂纹的萌生和扩展而不断增大。等效电路中得到的参数可以用来表征热障涂层的失效行为。     

GH4169合金真空自耗重熔铸锭显微疏松的形成规律及熔速影响

利用金相显微镜和扫描电镜研究了熔速对GH4169合金真空自耗重熔铸锭显微疏松和金相组织的影响;采用金相图像分析软件定量分析了熔速对铸锭显微疏松数量的影响。GH4169合金真空自耗重熔铸锭显微疏松的形成规律以及熔速影响的研究结果表明,由于金属气体凝结和喷溅等原因的影响,真空自耗铸锭表面激冷层中存在大量边界粗糙曲折的显微疏松。在激冷层下方的铸锭边部组织中,显微疏松数量明显减少,边界圆滑,气泡是疏松形成的重要原因。铸锭心部显微疏松尺寸增大,倾向于沿枝晶间通道分布。铸锭心部位于糊状区的底部,由于熔池较深,凝固速率缓慢,使该处二次和三次枝晶比较发达,偏析严重,从而容易阻塞补缩通道,所以易形成沿枝晶间通道分布的大尺寸疏松。随熔化速率增大,枝晶倾向于水平生长,熔池加深,二次和三次枝晶更加发达,偏析更加严重,显微疏松的尺寸和数量显著增加。     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

某涡扇发动机考虑级间引气的二维数值模拟

针对采用S₂流面流场模拟软件(AES-S2),对某涡扇发动机风扇、压气机(考虑级间引气)和整机进行地面0km及高空21km低雷诺数工况下转速特性的评估和流场分析.AES-S2数值仿真模型由带有黏性项的二维欧拉方程、燃烧模型和损失模型构成;采用任意曲线坐标系,可保证复杂几何边界的计算精度;采用隐式高阶精度Godunov求解格式,数值稳定性高,可自动捕捉激波.仿真结果表明:AES-S2计算稳定性好,收敛速度快;风扇和压气机的计算精度高于整机;整机二维计算满足工程精度需求,可为部件研制和整机部件匹配提供性能参数依据.      

固体火箭发动机不稳定燃烧研究进展

对固体火箭发动机不稳定燃烧的国内外研究现状和进展进行了详细综述.分别从物理概念、理论预估模型、实验研究、数值模拟等方面出发,论述了不稳定燃烧研究过程中的难点和一些经验教训.提出了应加强流场与声场能量交换、铝粉综合作用等机理的理论研究;开展分布燃烧、脉冲触发不稳定燃烧的实验研究;进一步开发稳定性预估软件等观点,为国内固体火箭发动机在该领域的研究提供参考.