抗辐照通用扩展SiP芯片设计

研究微小卫星综合电子系统的SiP技术实现方法。首先介绍微小卫星综合电子系统结构的组成和采用SiP技术的必要性，然后对综合电子系统进行功能模块划分，并对其通用扩展模块进行详细的SiP设计，包括抗辐照器件选型、原型验证、SiP原理图、基板管壳一体化设计、建模仿真、制造加工、实装测试验证等，通过SiP技术实现了一种星载综合电子系统中通用扩展SiP芯片产品，经过实际验证测试，在保证模块功能和性能的前提下，整体模块重量从230 g减轻到48 g，体积由180 mm?130 mm?17 mm减小到46 mm?46 mm?8 mm，很好地满足了星载功能模块小型化、轻量化设计需求。     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

液体火箭发动机协同设计平台关键技术

针对液体火箭发动机协同设计工程实际需求,围绕研制数据高效流转与协同,面向产品全生命周期跨地域、跨专业特点,提出了协同设计平台框架。针对协同平台中的5项关键技术,给出了相应解决途径。基于PLM系统构建协同环境,建立统一编码,整合研制过程中的标准件、原材料等共性基础数据;通过基于MBD的三维结构设计,采用MBSE理念,以模型为载体升级发动机设计流程;采用线上IPT模式提升产品设计效率,同时实现全过程数据记录知识累积。采用BOM结构组织和展示不同设计阶段形成的数据;基于Hadoop平台分布式数据存储模式,实现结构化和非结构化数据综合管理。通过工程实践验证表明,构建的协同平台实现了基于数字化模型的设计工艺定制化协同,科研生产全过程的信息整合和多维度监控,促进了业务流程持续优化和研制效率不断提升,支撑发动机研制模式的转型升级。     

rom 15 sel

with primary goat embryonic fibroblast showed no difference from traditional feederlayer-based culture method used in mouse and human. The putative primary EG colonies were multilayer clumps ofcompact cel     

利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.     

计算机帧时间对半实物仿真的影响

半实物仿真试验中,要求计算机帧时间与计算积分步长相一致,但在实际试验中不容易精确地做到。本文分析了这种不一致给半实物仿真试验带来的影响,给出了解决的办法,文章中还给出了一实例来说明。     

Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.