A novel virtual material layer model for predicting natural frequencies of composite bolted joints

A novel virtual material layer model based on the fractal theory was proposed to predict the natural frequencies of carbon fiber reinforced plastic composite bolted joints. Rough contact surfaces of composite bolted joints are modeled with this new proposed approach. Numerical and experimental modal analyses were conducted to validate the effectiveness of the proposed model. A good consistence is noted between the numerical and experimental results. To demonstrate the necessity of accurately modeling the rough contact surfaces in the prediction of natural frequencies, virtual material layer model was compared with the widely used traditional model based on the Master-Slave contact algorithm and experiments, respectively. Results show that the proposed model has a better agreement with experiments than the widely used traditional model (the prediction accuracy is raised by 8.77% when the pre-tightening torque is 0.5 N∙m). Real contact area ratio A* of three different virtual material layers were calculated. Value of A* were discussed with dimensionless load P*, fractal dimension D and fractal roughness G. This work provides a new efficient way for accurately modeling the rough contact surfaces and predicting the natural frequencies of composite bolted joints, which can be used to help engineers in the dynamic design of composite materials.     

基于嵌入式FPGA加速ORB算法的遥感影像配准方法

卫星上计算资源有限,星载嵌入式处理器处理遥感影像的配准时通常需要很长的时间.可编程逻辑门阵列(FPGA)利用其内部可编程器件可用于加速图像处理.提出了一种基于Xilinx公司的ZYNQ芯片加速ORB算法的遥感影像配准方法,可用于3000×3000像素尺寸的卫星图像配准,缩短了计算耗时,提升了ORB算法的计算能效比.利用...     

面内强磁场下铁磁板壳的自由振动

本文研究了面内强磁场环境下铁磁板壳的自由振动问题。基于Eringen-Maugin的关于磁弹性作用的理性力学模型,从理论上推导了一般壳体在磁场中的运动方程,进而求解了面内强磁场作用下的小磁化率悬臂铁磁薄板自由振动频率。数值计算结果表明,本文模型和已有的实验结果吻合很好。     

小波包变换和神经网络的某型导弹故障诊断方法研究

提出了一种基于小波包变换的残差能量方法,对导弹动态测试数据进行分析处理,提取导弹的故障特征,并在此基础上利用神经网络有效地实现了故障的诊断和定位。     

国外航空涡扇发动机涡轮叶片热障涂层技术发展

介绍了美国等国家开发的航空发动机涡轮叶片热障涂层技术及其应用情况,并总结了该技术的发展动向,旨在为中国开展相关研究和应用工作提供参考和借鉴.     

用于微型涡轮机的节流孔式静压气浮轴承实验

对用于厘米级微型涡轮发动机的径向静压气浮轴承展开了实验研究,分析了长径比、节流孔径、气膜间隙及供气压力等对承载力、刚度和耗气量的影响.提出了这些设计参数的优选方法,并结合直径11 cm的某微型喷气发动机,给出了与之匹配的径向静压气浮轴承设计方案:工作面直径15 mm、长度17.5 mm、节流孔径0.35 mm、气膜间隙25μm.此方案在供气绝对压力2.5 kPa时,双轴承支撑能力为13.72 N,耗气量小于1.0 g/s,有效地满足了微型涡轮发动机要求.      

期望状态序列导向的深空探测器规划修复方法

针对探测器动作持续、并行、消耗能源所导致的规划修复难求解问题,提出一种基于期望状态序列的深空探测器规划修复方法。该方法根据动作的执行完成情况,从既定规划中提取未完成执行动作的期望效果以及待执行动作的期望前提,构成一组有序的、逻辑与能源混合的期望状态集合,为规划修复提供子目标,从而将规划修复问题转化为状态转移路径搜索问题;并在搜索过程中,提出能源补给优先的规划修复策略,将逻辑修复与能源修复分离以降低问题求解难度,最终使得探测器能够自主从规划失败中恢复执行。最后,以火星环绕器为例进行数值仿真,验证了方法的有效性和合理性。     

不规则小行星附着可达区生成方法

针对不规则小行星表面附着任务需求,提出了一种基于动态邻域搜索的可达区生成方法。首先,建立了可达区数学模型,并采用质心距映射函数对非定点附着的终端位置约束进行了处理。在此基础上,将可达区的优化问题转化为附着基准点计算、边界起始点计算和边界点搜索三个子问题。针对附着基准点与边界起始点,分别通过最小燃耗轨迹优化与极限燃耗轨迹优化求解;针对边界点,设计了导向式动态邻域搜索方法,将复杂的非定点着陆优化问题简化为定点着陆燃耗优化与边界插值。最后,以小行星433 Eros为对象,对所提出的可达区生成方法进行了仿真。结果表明,该方法能够生成不规则小行星表面的可达区,具有较高的搜索求解效率,并适用于不同的初始位置和燃耗条件。     

航天器时态规划技术研究进展

结合航天器自主运行的迫切需求,阐述了航天器任务规划问题给智能规划技术带来的挑战,并重点分析了具有时间属性的规划方法研究必要性。给出航天器时态规划定义,分别总结了状态空间时态规划建模方法和基于时间线的时态规划建模方法,并给出时态规划知识模型关键元素定义。根据规划方法发展现状,归纳总结前向链、模型转换、规划空间规划和分层任务网络四种方法在时态规划技术方面的特点和研究进展,着重描述各种方法对规划中时间要素的处理。在对目前的航天器时态规划技术发展趋势总结分析基础上,给出了未来航天器时态规划技术的发展建议。     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.