多模式组合诊断技术在导弹导引头上的应用研究

阐明了四种类型的多模式组合诊断方法及其故障诊断的核心思想。以某导弹导引头的故障诊断为实例，详细描述了基于模糊理论、神经网络和粗糙集理论的三组合模式的诊断过程，并给出了诊断结果；介绍了我们研制的基于不确定性理论和专家系统组合的智能化故障诊断专家系统的应用。研究和应用实例表明：多模式组合诊断技术通用性和鲁棒性强。能够加快诊断速度。降低误诊率。尤其适合于复杂系统的故障诊断，具有很大的工程实用价值。     

FY—1C卫星高分辨率云图传输技术

介绍了FY－1C星传输系统的任务、方案、主要技术指标和组成。系统采用极化隔离加带外频谱抑制的方法，达到了信道隔离的技术指标。概述了星载记录器由磁带记录器向固态记录器转变的技术因素以及磁带记录器、FLASH和DRAM固态记录器的研制过程。简述了传输系统在轨测试和运行状况。     

二维有限元多尺度小波

本文利用有限元插值和多尺度分析理论构造出了二维有限元尺度函数及相应的有限元多尺度小波。构造出的尺度函数及小波函数具有许多良好的性质，如短支集、高阶消失矩、半正交性、正则性和对称性等。     

镉镍电池在武器回收系统中的应用探讨

文章对镉镍电池在武器回收系统中的应用进行了探讨 ,得到了在武器回收系统中可以用镉镍充电电池取代银锌蓄电池的结论     

非线性PD型比例导引鲁棒性研究

为研究存在视线角速度测量噪声时非线性比例微分(PD)型比例制导方案的鲁棒性,以近距大离轴角发射和目标大机动为拦截条件,对四种视线角速度测量噪声方差进行蒙特卡罗仿真模拟。结果表明,非线性PD型比例制导方案抗视线角速度测量噪声的鲁棒性强,对机动目标拦截制导精度高,是一种具工程应用价值的高精度末制导方案。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于四元数估计角速率的陀螺故障定位

当卫星速率积分陀螺的配置冗余度不满足一致性检验条件时，不能单纯利用硬件冗余实现陀螺的故障定位。鉴于角度和角速度敏感器的输出通过卫星运动学相关，本文利用姿态测量敏感器的输出来诊断陀螺故障。首先根据姿态测量敏感器的输出得到卫星姿态四元数，进而根据四元数动力学方程得到粗略的姿态角速度信息，并将此角速度作为输出信息用于对卫星动力学方程的滤波，从而得到较精确的角速度信息，为单冗余度陀螺组件的故障定位提供解析冗余信息。利用四元数方法可以避免出现奇点。仿真结果证明了该方法的有效性。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.