刷式密封二维模型数值计算

应用计入刷丝变形影响的各向异性多孔介质模型,用阻抗力表示刷丝对流动介质的阻碍作用,并将其作为Navier-Stoke方程的源项,以有限体积和SIMPLE算法为基础建立计算模型.通过流场计算,得到刷式密封的压力分布、速度分布以及泄漏量等.并根据计算结果分析结构和工况参数对刷式密封性能的影响.比较分析表明所述方法在刷式密封分析中具有实用价值.      

微量Ag对Al-Cu-Mg-Mn-Zr合金组织与耐热性能的影响

通过力学性能测试、金相显微镜、扫描电镜及透射电镜观察,研究微量Ag对Al-5.3Cu-0.8Mg-0.3Mn-0.15Zr合金薄板力学性能和显微组织的影响。结果表明,加入微量Ag后,提高合金的时效硬化能力,缩短峰时效时间。合金的室温抗拉强度和高温耐热性能得到提高,合金力学性能提高的原因在于析出一种更细小弥散的片状Ω相。未添加Ag的合金析出强化相为θ′相和少量S′相;添加Ag后,主要强化相为Ω相和少量θ′相。经固溶时效处理后,两种合金均发生完全再结晶。     

大型飞机辅助动力装置与微型涡轮发动机技术特点对比

对比分析了这两类动力系统的总体设计和部件技术特点,总结了两者的相似性和不同.分析结果显示:用于150～200座大型飞机的辅助动力装置与推力400 N左右的微型涡轮发动机具有相当的功率;两类动力系统主要部件的设计和制造都具有相似性,微型涡轮发动机的部件性能指标更高,而辅助动力装置通过略保守的设计来获得高可靠性、经济性和长寿命.最后,提出了在已有MTE技术基础上开展APU研制的技术路线.      

某弹载计算机GJB1188A接口的设计与实现

栽机要求悬挂物必须实现GJB1188A中数据总线(GJB289A)的远程终端(RT)功能,同时实现GJB1188A中任务悬挂物投放允许等接口功能.描述了一种采用TMS320C6713B高速浮点DSP为核心的GJB1188A接口的实现方法,从硬件平台组成、控制逻辑实现、驱动软件结构三个方面来说明GJB289A(RT)功能的实现方法.介绍了任务悬挂物投放允许等接口的一种设计实现方法.从而将以往单一的GJB289A总线接口模块与嵌入式计算机结合在一起.满足了体积和成本上的要求.使嵌入式弹载计算机在GJB1188A接口的前提下实现与机载火控系统的通信、进行同步的数据采集与控制.     

Self-Sensing Test Method for the Temperature of Piezoelectric Stacks

A self-sensing test method for the temperature of piezoelectric stack,based on the high correlation between the static capacitance and the stack temperature,is proposed in order to construct a self-sufficient methodology of temperature measurement. Firstly,a theoretical model of static capacitance of the piezoelectric stack under preload was set up,and the influence of preload on the static capacitance was analyzed. Secondly,the correctness of the model was verified by static capacitance test experiments under various preloading conditions. Finally, the temperature measurement experiments at low-temperature stage for two kinds of piezoelectric stacks,namely the lowtemperature-resistant piezoelectric stack and conventional piezoelectric stack, were conducted under various preloading conditions using a polynomial fitting method. The results,which validate the accuracy of the test method,show that the maximum temperature deviations of the two kinds of piezoelectric stack are 3.9 ℃ and 2.8 ℃,respectively,when the preload force is close to the specified value. The test method uses the piezoelectric stack itself as a temperature sensor,which does not require additional equipment for temperature sensing,so that the space and equipment cost could be economized. And the test for static capacitance is concise and convenient,which indicates that in the cooling process,a concise and efficient test of the temperature of the piezoelectric stack could be realized so as to grasp the current temperature change in time.     

树脂基防隔热复合材料高温响应分析方法研究进展

针对树脂基防隔热复合材料高温条件下复杂的热/力/化学的多场耦合问题，从高温性能预报模型、高温响应求解方法和高温试验测试三方面进行了论述。详细介绍了研究树脂基防隔热复合材料高温响应相关的热解动力学模型、材料高温热物性及力学性能演化表征方法、材料高温响应模型的求解方法以及表征材料高温响应的多种高温试验测试手段。对上述研究方法的发展进行了评述，并对未来发展趋势进行了展望。本文有助于相关研究人员认识和发展树脂基复合材料在高温下的热力响应分析方法，也可供工程技术人员对这类材料的防隔热性能和高温承载性能进行研究。     

Service life prediction of AP/Al/HTPB solid rocket propellant with consideration of softening aging behavior

The aging behavior of softening composite solid propellant was investigated by measuring its mechanical and ballistic prosperities during prolonged storage at elevated and room temperatures. Accelerated aging was conducted at 65 °C for 231 days while the normal aging was performed at 25 ± 3 °C and relative humidity less than 50% for 8 years. The mechanical properties were obtained from uniaxial tensile tests for the aged propellant specimens while the ballistic properties were determined from static firing tests of subscale motors aged for 112 days at 65 °C. The mechanical results show that the maximum tensile strength and Young's modulus initially increase and subsequently decrease with increasing aging time, while the maximum tensile strain generally increases with increasing aging time. The ballistic properties like burning rate show a small change which cannot affect the ballistic performance. The experimental results show that the changes in the mechanical properties are significant during the aging period, but the burning rate does not undergo significant changes. From this study, it is observed that the propellant ages through a combination of reactions like post-cure, oxidative cross-linking, chain scission, and hydrolysis. The chain scission and the hydrolysis effect are the most significant process, which makes the propellant soft and extendible. The observed aging mechanism has been modeled using an exponential function with two terms which can describe the complex behavior of the aging. By applying Arrhenius equation,the activation energy values were obtained based on the propellant mechanical properties. The shelf life of this propellant formulation at 25 °C is predicted to be 13 years using the modulus as failure criteria and control parameter.     

Reflected Wavefront Modulation with Phase Array by Using Acoustic Metasurface

Acoustic metasurface has attracted increasing attention due to the ability of manipulating the transmitted and reflected phase of waves to generate various acoustic functionalities with planar layer of sub?wavelength structure.We design an acoustic metasurface with a semi?closed and nested slotted tube array,and it possesses the capacity of modulating the reflected phase with sub ? wavelength thickness(about λ/23). The reflected phase shifts can be obtained from 0 to 2π by different rotation angles of internal slotted tubes. The theoretical results agree well with the numerical results by a finite element method. The results show that some excellent wavefront manipulations are demonstrated with the phase array by using acoustic metasurface such as anomalous reflection and sub?wavelength flat focusing. The design may offer a path for acoustic manipulation and promote the potential applications of acoustic metasurface in low frequency noise control,acoustic imaging and cloaking.     

飞机拦阻索动态特性研究

 为了分析飞机拦阻索在拦阻过程中复杂的动态特性,将拦阻索视为空间柔性钢索,液压吸能系统和缓冲系统经过线性拟合,作为传动索的约束条件,通过具有弹性和阻尼特性的梁单元加载在拦阻系统模型中,同时考虑了柔性钢索与刚性支撑体之间的接触碰撞作用,在有限元分析软件LS_DYNA中建立了拦阻系统的碰撞动力学模型,并进行了仿真研究。研究结果表明,飞机尾钩挂索后,在拦阻索与甲板滑轮之间存在连续震荡衰减的应力波,当来自于甲板滑轮的初次反射波到达钩索啮合点时,拦阻力达到极值。     

漂浮基空间机器人捕获卫星过程动力学模拟及捕获后混合体运动的RBF神经网络控制

 讨论了漂浮基空间机器人在轨捕获目标卫星过程的碰撞动力学建模,以及捕获操作结束后空间机器人与卫星混合体的稳定控制问题。首先采用多刚体动力学建模方法并结合空间机器人捕获目标卫星过程中的碰撞动力学特性,建立了漂浮基空间机器人在轨捕获漂浮卫星过程的动力学模型,并在此基础上计算出完成捕获操作后空间机器人与目标卫星混合体关节的运动速度。然后针对卫星及空间机器人系统惯性参数均是未知的复杂情况,应用上述模型、神经网络控制理论和Lyapunov稳定性理论,设计了空间机器人与卫星混合体在捕获过程碰撞冲击影响下稳定运动的高斯径向基函数神经网络控制方案,以达到对捕获卫星的有效控制。此外,高斯径向基函数神经网络控制方案具有不需要测量和反馈载体位置、移动速度与加速度的显著优点。系统数值仿真证实了上述控制方案的有效性。