Time delay estimation with multiple looks in colored Gaussian noise

We present an efficient algorithm for high resolution time delay estimation in colored Gaussian noise with multiple looks. By using a relaxation-based optimization approach and exploiting the Toeplitz property of the noise covariance matrix, the enhanced new algorithm can achieve the corresponding Cramer-Rao bounds (CRBs) with a very small number of independent looks     

精密电阻自动考核筛选装置的研制

介绍一种智能型的精密电阻自动考核筛选装置，解决了考核筛选精密电阻时繁重的重复性劳动，并保证了电阻测量的准确性，该装置还可应用于筛选考核稳压块等具有温度系数的器件。     

基于DSP2812的三相SPWM波形实现

针对变频技术的核心—SPWM波形的产生和控制,详细介绍了SPWM波形的产生方法,并给出了软件编程。通过以DSP芯片TMS320F2812为核心,利用规则采样法产生SPWM波形,具有速度快,精度高,实时控制能力强,易于频率变换等优点。     

新一代飞机自主保障信息系统任务决策及动态资源调度算法研究

基于故障预测与健康管理的自主式保障是新一代飞机和直升机设计的基本能力,是航空装备综合保障领域的重要变革。针对地面核心支持的自主保障信息系统,本文提出了任务决策/保障计划生成算法、动态资源调度算法等关键技术,为自主保障信息系统研制提供技术支持。     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

有磁场时电子在航天器光电子鞘层中的漂移运动

采用二级漂移近似理论，研究了在航天器光电子鞘层中与电流收集有关的电子在磁场中的运动轨道和收集电子有关的磁瓶结构，结果表明当磁场越强，航天器表面电势越弱，磁瓶在无穷远处横截面积就越小。在光电子鞘层中，势垒对电流收集影响较大，磁瓶的横截面积在略远于垫垒处有极大值，磁瓶在无穷远处的横截面积并非随着势垒距航天器距离的远近而单调变化。     

Military avionics optical fiber data buses with active-couplerconfigurations

Military avionics optical fiber data buses of high reliability are discussed. Because Light Emitting Diodes (LED's) have better temperature performance and require less complex driver circuits than laser diodes, the former is normally chosen as an optical source in the severe aircraft environment at present. In this case, optical power budget becomes a critical factor which can significantly limit the number of terminals in a data bus. To effectively solve this problem while maintaining a high reliability, we present several configurations of all-active couplers and hybrid passive/active couplers for avionics optical fiber data buses using PIN photodiodes and LED's. The system design is also described, which incorporates a modulation scheme called partial trilevel Manchester II bi-phase coding     

High temperature alters the growth reaction of Pottia protonemata.

Under gravistimulation, dark-grown protonemata of Pottia intermedia revealed negative gravitropism with a growth rate of approximately 28 μm·h⁻¹ at room temperature (20 °C). In 7 days, the protonema formed a bundle of vertically oriented filaments. At an elevated temperature (30 °C), bundles of vertically growing filaments were also formed. However, both filament growth rate and amplitude of the gravicurvature were reduced. Red light (RL) irradiation induced a positive phototropism of most apical protonemal cells at 20 °C. In a following period of darkness, approximately two-thirds of such cells began to grow upward again, recovering their negative gravitropism. RL irradiation at the elevated temperature caused a partial increase in the number of protonemal cells with negative phototropism, but the protonemata did not exhibit negative gravitropism after transfer to darkness. The negative gravitropic reaction was renewed only when protonemata were placed at 20 °C. A dramatic decrease in starch amount in protonemal apical cells, which are sensitive to both gravity and light, occurred at the higher temperature. Such a decrease may be one of the reasons for the inhibition of the protonemal gravireaction at the higher temperature. The observation has a bearing on the starch-statolith theory.     

超大型光学镜面面形的纳米定位技术

电容式传感器在纳米级测试中得到了广泛的应用，但是对环境条件要求较高，检测中温、湿度的变化、传感器本身结构乃至其电路性能等因素，将直接影响测量的准确度和灵敏度。介绍了大型天体望远镜光学镜面面形的控制方法和工作原理。该大型天体望远镜Φ１０ｍ的主镜由３６块对角线长１．８ｍ的六角形子镜拼接而成，应用电容测微技术使此超大型镜面的共面性达到纳米量级的定位控制。通过检测原理的分析，阐述了电容式传感器在使用中提高其准确度和长期稳定性的理论分析和具体技术措施，并针对国内正在研制的ＬＡＭＯＳＴ超大型天体望远镜实际应用环境和技术指标要求，提出新的差动式传感器，并采用新材料和高集成度的进口新器件，以满足传感器在温、湿度变化大的条件下实时监测的要求。     

轴编C/C复合材料组分材料有效性能

利用光学显微镜观测和测量轴编C/C复合材料细观编织结构及其尺寸,建立轴编C/C复合材料有限元模型,通过给出组分材料有效性能的变化区间,构造组分材料性能与轴编C/C复合材料宏观有效性能的对应关系,利用径向基函数(RBF)人工神经网络(ANN)方法,对该高度非线性的对应关系进行训练,通过轴编C/C复合材料宏观实验结果,预报其组分材料的有效性能。结果表明,轴编C/C复合材料面内弹性性能基本相同,在测量时可忽略面内纤维束铺设方向的影响;人工神经网络对训练样本有一定的依赖性,但通过多次随机构造样本训练网络,可得到理想的预测结果,且人工神经网络方法具有很好的容错性,能很好地预报轴编C/C复合材料组分材料的有效性能。