激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

战术弹道导弹中段多弹头进攻方法的研究

由于弹道导弹防御技术的不断发展完善，没有突防手段的战术弹道导弹进攻的成功概率正在不断下降。本文利用零射程线给出了一种在中段初始阶段使用的多弹头突防手段，并进行了理论证明和仿真验证。这种方法不仅工程实现简单，而且在对抗过程中十分有效。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

IEEE488总线在动量轮测试中的应用

叙述了资源卫星动量轮的一般结构和开环测试原理。详细介绍了应用ＩＥＥＥ４８８总线构成的动量轮开环性能自动测试系统。说明了这个自动测试系统的系统构成以及测试项目、测试流程和获得的测试结果。并据此提出这个系统在卫星研制工作中具有推广价值。     

过程体系结构

从系统论的观点出发，明确定义了过程工程领域的基本概念，定义了过程体系结构，采用了一个扩充的ＣＯＳＭＯＳ模型，以支持灵活的过程建模，并在此基础上讨论了过程的工程化支持。     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

多元线性回归在坐标测量中的应用

简要介绍了多元线性回归的数学原理,重点分析了坐标测量中利用回归分析进行基本几何要素处理计算的原理、方法和预处理技巧,在此基础上介绍和讨论了形位误差的处理计算方法。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

星光对机动弹道导弹主动段的修正

 <正> 以惯性技术为主,并以星光、无线电等其它技术为辅的组合导航及制导技术是70年代以来发展较为迅速,并被认为是行之有效的技术手段。特别是对于大型航空航天飞行器。例如航天飞机、远程导弹等,只有采用精密的组合导航技术才能保证这类飞行任务的完成。任何单一的导航及制导技术都有其长处及弱点,将这些单一的技术手段组合起来扬长避短、相互补偿,毫无疑问是一种可行的途径。星光的引进将会使对