基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

应用联合变换相关器的成像制导系统

提出了一种光电混合的成像制导系统，它采用光学联合变换相关器作为其主要的图像识别单元，利用计算机对识别结果进行判决和显示，并发出跟踪信号给导引头，从而实现制导。联合变换相关器是对光学图像信号进行并行处理的器件，实时识别性能强，精度高。此成像制导系统克服了传统的红外制导系统易受外界因素影响，实时处理能力差，误判率较高的缺点，具有并行处理速度快、信息吞吐量大、体积小等优点，应用前景广阔。     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

LabVIEW在直流低电压测量中的应用

以对数字纳伏表的测试为例,详细介绍了一种运用LabVIEW编制直流低电压自动检定程序,采集测试数据并进行分析和处理的方法。重点强调了在测控系统中运用LabVIEW编程的便捷性和高效性。     

一种脉冲液体流量标准装置主标准器的测量不确定度评定方法

介绍了一种活塞位移型体积管常数的测定方法、数学模型及其测量标准不确定度分量,并给出了不确定度评定实例和验证结果。     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。     

锯齿型扰流片对壁面压力分布的影响

在风洞用电子扫描阀进行测压,研究了绕平板扰流片和锯齿扰流片分离流动的壁面压力分布.结果表明平板扰流片和锯齿扰流片均在上游x/h=-6处剪切层开始分离,并再附于下游x/h≈20的位置.锯齿扰流片横向位置的变化对壁面平均压力分布几乎没有影响,但通过锯齿槽流向的压力脉动一般大于通过锯齿尖点流向的脉动.从平均压力分布看,锯齿高度可以增加扰流片阻流效果,采用锯齿扰流片可以减小下游壁面压力的脉动.     

基于实数编码的改进遗传算法研究

针对遗传算法运算速度低、容易陷入局部最优值、早熟收敛等缺点,提出了基于实数编码的遗传算法的改进算法,对基于实数编码的遗传算法的选择、交叉、变异算子以及操作方法进行了改进,采用最佳保留选择策略、多算子交叉和变异,并且采用自适应变焦变异,改进后的交叉与变异操作,使算法始终保持了种群的多样性,同时也提高了寻优最终结果的精确性。实验表明基于实数编码的改进遗传算法(R IGA)有效的改善了遗传算法的缺点。     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。