燃烧过程辐射换热离散坐标模型的应用

对离散坐标(DO)辐射传热模型分别在长方体空间和旋流燃烧室内进行了验证与应用。长方体空间的计算结果表明:DO模型的纯辐射传热预报结果比六热流(SHF)模型准确,与计算精确的区域法的计算结果吻合较好,而SHF模型的预报结果却有较大的误差。对于旋流燃烧室内温度场的模拟预报也表明,DO模型的计算结果和实验值相吻合,明显高于用SHF模型计算所得的温度值。另外,DO模型在计算时间和边界处理等方面比区域法优越;在收敛速度和计算准确度等方面也比工程常用的六通量模型优越。      

DSMS悬挂物的初始化和控制流程研究

首先指出了数字式悬挂物管理系统(DSMS)的先进性,分析了其组成和接口,然后重点研究了DSMS悬挂物的初始化和控制,包括各状态系列、接口控制动作、标准消息数据格式,进而以流程图的形式概括了整个过程.     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

带CDFS的核心机过渡态数值模拟方法研究

针对带核心驱动风扇级(CDFS)的核心机过渡态数值模拟获得的CDFS加、减速工作线趋势与试验结果不一致的问题,进行了原因解析和模型改进。通过分析影响CDFS加、减速工作线的主要因素,发现引起该问题的原因,是外涵放气系统节流位置随核心机状态改变,容腔容积偏离了物理容积。在分析容腔效应原理的基础上,提出以虚拟容积代替物理容积计算CDFS工作线的方法,并对模型进行了改进。改进后的模拟结果表明:采用虚拟容积计算的CDFS加、减速工作线趋势与试验结果一致,可满足带CDFS的核心机过渡态数值模拟要求。     

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.     

航空电子MB-OFDM-UWB无线互连信道分析与仿真

多频带正交频分复用超宽带（MB-OFDM-UWB）是航空电子内部无线互连（WAIC）的候选通信体制之一,不同于普通的室内无线信道,超宽带信号在金属和复合材料的机舱内部存在复杂的反射和多径干扰。给出一种适用于WAIC应用的MB-OFDM-UWB无线通信系统物理层方案,并参照IEEE802.15.4a标准提出一种适应航空电子机舱内部特征的多簇多径UWB信道模型;通过基于接收球的反射角误差法仿真得到无线信道的冲激响应,确定了机舱环境下信道模型的簇到达率、径到达率和混合因子;进而采用Simulink进行MB-OFDM-UWB信号系统仿真,表明在110 Mb/s码速率条件下,当误码率低于国际电信联盟（ITU）标准规定的10^-6,机舱环境下的信噪比应比普通室内环境高1 dB。另外,在研究过程中,为了确认电磁仿真中接收球半径的有效性,针对基准环境将仿真结果与文献报道的实测结果进行了对比。     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题,通过风洞试验,首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°）,俯仰力矩线性增加,全机从附着流到形成进气道前缘涡和机翼涡;非线性增长区（迎角为17.5°~32.5°）,俯仰力矩非线性增加,机头涡出现,机头涡和进气道前缘涡逐渐增强,机翼涡增强后破裂;衰减区（迎角为35°~65°）,俯仰力矩逐渐减小,机头涡增强后破裂,进气道前缘涡破裂发展,机翼涡完全破裂。其次,发现了机身前体是产生正俯仰力矩的主要来源,机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时,前体各截面正俯仰力矩在进气道前缘处达到最大,主要是由于该处机头涡诱导产生了较强的法向力。最后,提出了大迎角机身扰流板控制技术,产生了较好的控制效果。当迎角为40°时,扰流板可使正俯仰力矩减少62%,其原因是扰流板降低了机头涡涡量及其诱导产生的法向力,减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

应用于超级电容储能系统的双向DC/DC变换器混沌控制方法研究

超级电容储能系统(SCESS)主要通过对双向DC/DC变换器进行控制来快速平抑直流母线电压的波动。为了抑制控制过程中所产生的一些分岔和混沌现象,提出了一种应用于SCESS的混沌控制方法。分析了该方法的控制原理,并根据非线性动力学理论建立了双向DC/DC变换器的离散迭代模型;然后设计了一种能够自动调节补偿斜率的混沌控制信号;最后对该信号作用下的异步切换函数和同步切换映射式进行了数值求解,从而绘出系统分叉图。通过仿真和试验证明,该方法能够有效抑制SCESS的分岔和混沌现象,提高了系统的稳定工作范围和动态响应速度。     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.