Analysis of towed decoys

Recent advances in RF missile systems have reduced the effectiveness of conventional on-board electronic countermeasures (ECM) to defend friendly aircraft. To provide the much needed defense, off-board ECM techniques are being developed. The effectiveness of off-board RF ECM is analyzed, and specific observations are made about the effectiveness of such ECM when used to defend friendly aircraft     

用推力矢量控制技术改进超声速飞行器空气动力特性

为了提高某超声速飞机的空气动力学效率和机动性能,本文采用低阶的三维板块法和DATCOM半经验公式,在亚声速和超声速条件下,对不同马赫数和迎角情况计算了基本气动外形的飞机空气动力学特性、表面压力分布以及最大升力。此外还开发了一套软件以实现由引进的先进气动操纵面（如鸭翼等）控制的二维推力矢量技术。试验结果表明：气动操纵面结合推力矢量技术能够产生足够的低头力矩,且有能力满足高度机动飞行时的稳定性要求。此外,不论是亚声速还是超声速飞行,气动操纵面均可以提高气动效率5％-6％。     

The role of radial perpendicular diffusion and latitude dependent acceleration along the solar wind termination shock

A numerical model, based on Parker’s transport equation, describing the modulation of anomalous cosmic rays and containing diffusive shock acceleration is applied. The role of radial perpendicular diffusion at the solar wind termination shock, and as the dominant diffusion coefficient in the outer heliosphere, is studied, in particular the role it plays in the effectiveness of the acceleration of anomalous protons and helium when its latitude dependence is changed. It is found that the latitudinal enhancement of radial perpendicular diffusion towards the heliospheric poles and along the termination shock has a prominent effect on the acceleration of these particles. It results in a ‘break’ in the energy spectrum for anomalous protons at ∼6.0 MeV, causing the spectral index to change from E^−1.38 to E^−2.23, but for anomalous helium at ∼3.0 MeV, changing the spectral index from E^−1.38 to E^−2.30. When approaching the simulated TS, the changes in the modulated spectra as they unfold to a ‘steady’ power law shape at energies below 50 MeV are much less prominent as a function of radial distances when radial perpendicular diffusion is increased with heliolatitude.     

Enhancing Maintainability of the AWG-10 Through Built-In-Test Equipment

Multimode airborne weapons systems are now a reality. Because of the increased complexity of these systems, excessive maintenance time has become a problem. This paper describes an approach to reducing maintenance time through the use of semiautomatic built-in-test equipment within the framework of an integrated maintenance program. Emphasis is placed on the methods and hardware involved in the built-in-test mechanization as well as describing the development history of this type of maintenance concept.     

Identification of Rotating Assembly Inertial and Bearing Parameters

The problem of estimating the state of a turbopump rotating assembly and identifying unknown products of inertia and unknown bearing parameters is considered. A linearized, extended Kalman filtering approach has been used and found to be successful for both state estimation and parameter identification in an inherently nonlinear problem. The input data was simulated Bently test data which was obtained from a verified 12-dimensional state-space model and was compared with real Bently test data obtained from NASA. The results prove the feasibility of using this model and this type of test data to obtain the hidden parameters of a typical turbopump rotating assembly. This method should lead to improved performance by allowing improved balancing of the rotor and giving improved knowledge of the bearing reactions.     

The problem with aviation COTS

Commercial Off the Shelf (COTS) has become a byword for acquisition reform, but there are significant risks associated with the use of COTS products in military systems. These risks are especially acute for aviation systems. This paper explains how COTS can negatively affect military acquisitions and gives ideas on how to plan and resolve COTS caused problems     

基于半实物仿真的地磁导航等值线匹配算法评估

影响地磁导航匹配算法性能的因素很多,而现阶段算法的评估完全依靠计算机仿真,其可信性有待进一步验证.以等值线(ICCP)算法为研究对象,首先从理论上分析影响算法性能的因素;然后搭建了地磁匹配导航半实物仿真系统,通过引入磁场仿真环境和磁传感器,提高了仿真的可信度;最后从测量噪声、匹配长度、匹配区域和惯导误差4个方面对ICCP 匹配算法的性能进行半实物仿真试验分析.仿真结果表明,通过半实物仿真试验可以对算法的抗干扰性、算法匹配长度的确定、匹配区域的选择以及惯导误差的影响做出有效评估,从而推动地磁匹配导航及匹配算法的工程化进程.      

干涉测量宽带相关处理算法与验证

阐述了一种用于航天器精确角位置测量的干涉测量宽带相关信号处理算法,通过仿真验证了算法的有效性,并搭建卫星干涉测量实验系统,采集某地球同步卫星信号进行宽带相关信号处理,获得清晰干涉条纹,准确估计出反映测站与卫星位置关系的时延观测量。结果表明宽带相关信号处理的估计时延与卫星信号链路标定时延、测距时延组成系统时延闭合回路,初步验证了干涉测量实验系统的有效性,为后续飞行任务中航天器高精度干涉测量积累了技术和经验。     

Radar Target Detection and Map-Matching Algorithm Studies

Results of a study of adaptive threshold target detection and map-matching algorithms are presented. Log threshold processing is shown to be preferred over linear threshold processing when the clutter data surrounding the target cell is contaminated by other targets, decoy corner reflectors, or bright clutter cells. Whereas previous studies have resorted to extensive Monte-Carlo simulations of log threshold algorithms, the results were obtained using a novel analytical approach based upon Parseval's theorem.     

Multistage integration model for human egomotion perception

Human computational vision models that attempt to account for the dynamic perception of egomotion and relative depth typically assume a common three-stage process: first, compute the optical flow field based on the dynamically changing image; second, estimate the egomotion states based on the flow; and third, estimate the relative depth/shape based on the egomotion states and possibly on a model of the viewed surface. We propose a model more in line with recent work in human vision, employing multistage integration. Here the dynamic image is first processed to generate spatial and temporal image gradients that drive a mutually interconnected state estimator and depth/shape estimator. The state estimator uses the image gradient information in combination with a depth/shape estimate of the viewed surface and an assumed model of the viewer's dynamics to generate current state estimates; in tandem, the depth/shape estimator uses the image gradient information in combination with the viewer's state estimate and assumed shape model to generate current depth/shape estimates. In this paper, we describe the model and compare model predictions with empirical data.