Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

激光喷丸成形多尺度有限元模拟技术

激光喷丸技术是一种先进的金属塑性成形和表面强化技术,相比于弹丸喷丸,激光喷丸能量密度更大,因而成形能力更强,可以用于成形刚度更大的钣金件,如飞机整体壁板,在航空航天领域有广泛的应用前景。构建一种多尺度激光喷丸成形模拟方法,包括激光喷丸诱导应力场的计算方法和基于直接应力法的工件成形曲率的预测方法。预测结果通过2024–T351铝合金块状试件和典型截面单筋件激光喷丸试验得到了验证,试验结果与模拟结果吻合较好,表明此模拟方法有效可行。     

Comparison of ≳40 keV Electron Events at High and Low Heliolatitudes: Ulysses/HI-SCALE and ACE/EPAM

We have performed a joint survey of anisotropic ≳40 keV electron events from August 1997 to September 2000 using the matched detectors on the Ulysses (ULS)/HI-SCALE and the ACE/EPAM instruments. A computer algorithm selected events with strong, statistically significant pitch-angle anisotropies. Electron pitch-angle distributions at ACE (∼1 AU) are often ‘beams’ that are strongly collimated along the local interplanetary magnetic field (IMF). These flare-associated impulsive injections can display rapid rise times (∼15 min) and slower decays, or more irregular intensity histories. At ULS, the electron intensities are lower and the time histories smoother, but strong anisotropies are still observable, indicating direct, nearly field-aligned propagation outward from the Sun. We focus on four event periods, selected from the survey, during times when the angle between the footpoints of the IMF lines intersecting ACE and ULS is small. These events span three full years and cover a wide range of distances and heliographic latitudes. We found one reasonably good association between impulsive electron events at ACE and ULS, and two events with small field-aligned gradients. This revised version was published online in August 2006 with corrections to the Cover Date.     

Detecting moving targets in SAR imagery by focusing

A new method for detecting moving targets in a synthetic aperture radar (SAR) image is presented. It involves segmenting a complex-valued SAR image into patches, focusing each patch separately, and measuring the sharpness increase in the focused patch. The algorithm is sensitive to azimuth velocities and is exquisitely sensitive to radial accelerations of the target, allowing it to detect motion in any direction. It is complementary to conventional Doppler-sensing moving target indicators, which can sense only the radial velocity of rapidly moving targets.     

Detection of chi-square fluctuating targets in arbitrary clutter

In a recent paper, general expressions were derived for the density and cumulative probability functions of the amplitude of a linear matched-filter output given a nonfluctuating target in a clutter-limited environment. These expressions were based on the clutter amplitude density function. The results are extended to calculate the cumulative probability function of the output of a linear matched filter used to detect a chi-square fluctuating target in a clutter-limited environment. The resulting method is applied to a common radar clutter model, and experimental sonar data.     

Three-dimensional cosmic-ray simulations: Heliographic latitude and current-sheet tilt

We present the results from a study of the variations of the cosmic-ray intensity with time, heliographic latitude, and longitude, and for varying interplanetary conditions, using our three-dimensional, time-dependent computer code for cosmic-ray transport in the heliosphere. Our code also produces a solar-wind and interplanetary magnetic field (IMF) configuration which is compared with observations. Because of the fully threedimensional nature of the model calculations, we are able to model time variations which would be expected to be observed along Ulysses's trajectory as it moves to high latitudes. In particular we can model the approximately 13-and 26-day solar-rotation induced variations in cosmic rays, solar wind and IMF, as a function of increasing heliographic latitude, as one moves poleward of the interplanetary current sheet. Our preliminary model results seem to be in general form quite similar to published data, but depend on the physical parameters used such as cosmic-ray diffusion coefficients, boundary conditions, and the nature of the solar wind and IMF and current sheet.     

Robust algorithm for combating look direction error problems

A simple and fast zero tracking algorithm for adaptive arrays with large look direction errors is presented and investigated. Basically, the algorithm is based on adjusting the complex zeroes of a power inversion array in a time-multiplexed manner to track all the sources in the environment. To preserve the desired signal which is supposed to be closest to the look direction of 0°, the algorithm removes the zero with the shortest distance to e^j0 so that the directional response consists of only nulls steered at the jammers. When compared with the least mean square (LMS) algorithm employing zeroth and first-order look direction constraints, the new algorithm has about the same implementation complexity, is considerably faster, and possesses a much better signal-to-noise ratio (SNR) performance when the look direction is erroneous     

Refractive Errors in Angle-of-Elevation Measurements

It is shown that the errors associated with radio elevation measurements may be investigated systematically using a variational technique. The error occurring when spaced antennas are used is compared with that for a single directional antenna. Integral expressions are obtained for the refractive errors.     

On Optimal Allocation and Guidance Laws for Linear lnterception and Rendezvous Problems

This paper considers the problem of guiding N interceptors so that they intercept or rendezvous with N targets at the same time T. It is assumed that the interceptors and targets are described by linear time-varying differential equations (deterministic or stochastic). Under certain assumptions both the optimal (static or dynamic) interceptor-target allocation and the guidance of each interceptor for the optimal allocation can be obtained with modest real-time and storage computer requirements.