难加工材料闭式整体构件精密电火花加工技术研究

闭式整体构件因其结构复杂、叶间流道空间弯扭程度大,使得加工可达性极差,且材料一般为难加工的高强度合金,整体制造难度很大。针对这一制造难题,研究了闭式整体构件电火花加工的若干关键技术,如叶间流道加工区域划分、成形电极及其加工运动轨迹设计、工艺基准统一和电参数选择与优化、数控电火花加工过程仿真分析等。在此基础上针对典型闭式整体构件进行了试制加工。试验结果表明,基于所研究的关键技术能够采用数控电火花加工技术精密、可靠地实现闭式整体构件的整体制造。     

基于马尔科夫链模型的脉动装配线运行状态预测

分析了影响脉动生产线运行的因素和状态预测的必要性,提出了基于马尔科夫链模型的状态预测方法。基于马尔科夫链预测理论,对脉动生产线运行状态划分,确定状态转移矩阵,建立马尔科夫预测模型,并对模型准确性进行验证。     

复合材料加筋壁板制造成本的快速估算模型

为了能够在设计阶段早期对复合材料加筋壁板制造成本进行快速估算,提出了一种以结构设计重量为主要驱动因素的制造成本估算模型。该模型的关键是考虑了诸如材料成本比重系数、制造工艺系数、蒙皮形状系数、筋条形状系数、材料利用率系数等合理取值。以某验证试验的试验件制造成本估算为例,估算成本与实际制造成本的偏差为10.8%,说明了采用该方法对复合材料加筋壁板制造成本进行快速估算的结果是可以为设计人员提供决策依据的。     

OSIRIS-REx: Sample Return from Asteroid (101955) Bennu

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on January 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in November 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennu’s resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.

     

Time-Delay Integration Imaging with ICON’s Far-Ultraviolet Imager

A Time-Delay Integration (TDI) image acquisition and processing system has been developed to capture ICON’s Far Ultraviolet (FUV) Spectrographic Imager data. The TDI system is designed to provide variable-range motion-compensated imaging of Earth’s nightside ionospheric limb and sub-limb scenes viewed from Low Earth Orbit in the 135.6 nm emission of oxygen with an integration time of 12 seconds. As a pre-requisite of the motion compensation the TDI system is also designed to provide corrections for optical distortions generated by the FUV Imager’s optical assembly. On the dayside the TDI system is used to process 135.6 nm and 157.0 nm wavelength altitude profiles simultaneously. We present the TDI system’s design methodology and implementation as an FPGA module with an emphasis on minimization of on-board data throughput and telemetry. We also present the methods and results of testing the TDI system in simulation and with Engineering Ground Support Equipment (EGSE) to validate its performance.

     

Imaging Plasma Density Structures in the Soft X-Rays Generated by Solar Wind Charge Exchange with Neutrals

Both heliophysics and planetary physics seek to understand the complex nature of the solar wind’s interaction with solar system obstacles like Earth’s magnetosphere, the ionospheres of Venus and Mars, and comets. Studies with this objective are frequently conducted with the help of single or multipoint in situ electromagnetic field and particle observations, guided by the predictions of both local and global numerical simulations, and placed in context by observations from far and extreme ultraviolet (FUV, EUV), hard X-ray, and energetic neutral atom imagers (ENA). Each proposed interaction mechanism (e.g., steady or transient magnetic reconnection, local or global magnetic reconnection, ion pick-up, or the Kelvin-Helmholtz instability) generates diagnostic plasma density structures. The significance of each mechanism to the overall interaction (as measured in terms of atmospheric/ionospheric loss at comets, Venus, and Mars or global magnetospheric/ionospheric convection at Earth) remains to be determined but can be evaluated on the basis of how often the density signatures that it generates are observed as a function of solar wind conditions. This paper reviews efforts to image the diagnostic plasma density structures in the soft (low energy, 0.1–2.0 keV) X-rays produced when high charge state solar wind ions exchange electrons with the exospheric neutrals surrounding solar system obstacles.The introduction notes that theory, local, and global simulations predict the characteristics of plasma boundaries such the bow shock and magnetopause (including location, density gradient, and motion) and regions such as the magnetosheath (including density and width) as a function of location, solar wind conditions, and the particular mechanism operating. In situ measurements confirm the existence of time- and spatial-dependent plasma density structures like the bow shock, magnetosheath, and magnetopause/ionopause at Venus, Mars, comets, and the Earth. However, in situ measurements rarely suffice to determine the global extent of these density structures or their global variation as a function of solar wind conditions, except in the form of empirical studies based on observations from many different times and solar wind conditions. Remote sensing observations provide global information about auroral ovals (FUV and hard X-ray), the terrestrial plasmasphere (EUV), and the terrestrial ring current (ENA). ENA instruments with low energy thresholds (\(\sim1~\mbox{keV}\)) have recently been used to obtain important information concerning the magnetosheaths of Venus, Mars, and the Earth. Recent technological developments make these magnetosheaths valuable potential targets for high-cadence wide-field-of-view soft X-ray imagers.Section 2 describes proposed dayside interaction mechanisms, including reconnection, the Kelvin-Helmholtz instability, and other processes in greater detail with an emphasis on the plasma density structures that they generate. It focuses upon the questions that remain as yet unanswered, such as the significance of each proposed interaction mode, which can be determined from its occurrence pattern as a function of location and solar wind conditions. Section 3 outlines the physics underlying the charge exchange generation of soft X-rays. Section 4 lists the background sources (helium focusing cone, planetary, and cosmic) of soft X-rays from which the charge exchange emissions generated by solar wind exchange must be distinguished. With the help of simulations employing state-of-the-art magnetohydrodynamic models for the solar wind-magnetosphere interaction, models for Earth’s exosphere, and knowledge concerning these background emissions, Sect. 5 demonstrates that boundaries and regions such as the bow shock, magnetosheath, magnetopause, and cusps can readily be identified in images of charge exchange emissions. Section 6 reviews observations by (generally narrow) field of view (FOV) astrophysical telescopes that confirm the presence of these emissions at the intensities predicted by the simulations. Section 7 describes the design of a notional wide FOV “lobster-eye” telescope capable of imaging the global interactions and shows how it might be used to extract information concerning the global interaction of the solar wind with solar system obstacles. The conclusion outlines prospects for missions employing such wide FOV imagers.     

软件体系结构的探讨

软件体系结构是软件工程中的一个新兴研究领域,它与软件工程技术的发展有着密切的关系。首先,从软件工程技术的发展了解软件体系结构研究的必然性;然后,给出软件体系结构的概念描述,介绍有关体系结构研究的内容;最后,举出一个实例。     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

干涉测量宽带相关处理算法与验证

阐述了一种用于航天器精确角位置测量的干涉测量宽带相关信号处理算法,通过仿真验证了算法的有效性,并搭建卫星干涉测量实验系统,采集某地球同步卫星信号进行宽带相关信号处理,获得清晰干涉条纹,准确估计出反映测站与卫星位置关系的时延观测量。结果表明宽带相关信号处理的估计时延与卫星信号链路标定时延、测距时延组成系统时延闭合回路,初步验证了干涉测量实验系统的有效性,为后续飞行任务中航天器高精度干涉测量积累了技术和经验。     

T型尾翼颤振模型光学测量实验与弯扭特性解算

在FL-26跨声速风洞半模试验段进行了某高速飞机T型尾翼颤振模型的光学测量实验,并依据测量结果解算了尾翼颤振模型的弯扭特性。颤振模型表面用白色圆点进行标记,用于记录模型表面的位移变化,两台固定在风洞试验段上壁板观察孔旁肋板上的400万像素工业相机用来采集图像,采集到的图像通过自主开发的图像解算软件进行图像的识别与求解,计算出尾翼颤振模型表面标记点的三维坐标。模型表面标记点的三维坐标通过坐标变化转换到风洞气流坐标系中,利用不同时刻模型表面坐标的变化计算模型剖面扭角和弹性轴位移的分布。T型尾翼右平尾图像采集实验与弯扭特性计算结果表明,非接触光学测量技术可以用于高速颤振试验的定量分析中。