Power-line harmonic radiation and the electron slot

World maps of the occurrence of VLF emissions obtained by the satellites Ariel 3 and 4 reveal maxima above industrial regions of high power consumption in North America and Euro-Asia. A study of the generation and radiation of power line harmonics indicates that these may be a major source of the observed signals. The latter propagate in the whistler mode into the geomagnetically conjugate regions in the southern hemisphere. A particularly prominent zone of emission is obtained at VLF (3.2 kHz) over North America where frequent magnetospheric wave amplification/stimulated emission, up to 50 dB and typically 10 to 20 dB above a baseline level that we ascribe to power harmonic radiation (PLHR), is obtained at invariant latitudes 45 to 55° (2 < L < 3) centred on the electron slot. It appears that PLHR may be responsible for pitch angle diffusion of energetic electrons (E 100 keV) at large pitch angles by first-order resonance and thereby contribute to the formation of the electron slot. There is a strong seasonal variation in wave-amplification/stimulated emission which we suggest may be due to a variation in the ability of the waves to become entrapped in ducts where wave-amplification occurs through a phase-bunching process. There is a strong correlation between D _ST and signal intensity, the latter lagging by 1–5 hr in the morning and 10 hr in the evening; here again wave-amplification appears to depend on duct formation and wave trapping therein. One or two (or multi) hop emissions occur with about equal probability at 3.2 kHz; at 9.6 kHz one hop are predominant.Paper presented at the Fifth International Wrocaw Symposium on Electromagnetic Compatibility, Wroclaw (Poland), 17–19 September, 1980. Sci. Rpt. 1978 (1), Sheffield Univ. Space Physics Grp.     

Hardware-Constrained Hybrid Coding of Video Imagery

The design, implementation, and performance of a video bandwidth compression system is described. In this system, compression is obtained by several methods including the use of DCT/DCPM hybrid coding, frame rate reduction, and resolution reduction. The overall compression ratio is up to 1000:1. The hardware-constrained design of the DCT and the DPCM is described and a new method is derived to solve the optimum integer bit-assignment problem associated with the block quantization process in the DPCM. Computer simulation results are presented which predict that the performance of the system using the derived optimal bit assignment method is superior to those obtained by other bit assignment methods. The real-time hybrid coding system design is optimized for a set of ?modified? average statistics to compress a wide variety of input video images. This approach eliminates the problem of nonzero dc mean value which could otherwise cause serious degradations in the system performance. The compression system is fully implemented and the quality of the reconstructed video as predicted by computer simulation has been demonstrated by the actual hardware performance. The PSNR of the reconstructed imagery is in excess of 36 dB at 2 bits per pixel.     

Rotation and Shape of High Altitude Reflectors Controlled from the Ground

Passive, inverted-dish shaped communications mirrors made of a thin wire mesh may be maintained in a stationary position above most of the atmosphere by the pressure of reflected radiation beamed at the mirror from the ground. We show that by beaming at the mirror an appropriate mixture of linearly and circularly polarized radiation, and by inducing small periodic variations of the plane of polarization, one can monitor and sufficiently control wire orientation in the mirror, which allows one to reduce mirror weight and/or set the mirror in rotation. Mirror rotation in turn can modify mirror shape, open up flaps, and allow synchronized messages to be sent to prechosen locations.     

Multipath Effects on an Azimuthal Monopulse System

The first topic considered is an analysis of the conditions under which the conventional definition of length of the glistening surface, as given by Beckmann and Spizzichino, is not valid. For some conditions, significant amounts of incoherent scattered power can be received from areas beyond the conventional length. A second topic is the investigation of the effect on azimuthal angular tracking accuracy due to such scattering factors as shadowing, surface height distribution, standard deviation in surface height ?, surface correlation length T, unevenness and inhomogeneity of the terrain, antenna heights, and signal polarization. A number of interesting results have been observed. The amount of additional incoherent power not included under the conventional definition depends on the ratio ?/T, except for the case where both transmitter and receiver are very close to the surface. The trends in the behavior of the glistening surface are similar for vertical or horizontal polarization, for Gaussian or exponential surface height distributions, and for different signal frequencies in the S-band to L-band range.     

On Uniform Sampling of Amplitude Modulated Signals

For a bandpass waveform produced by the amplitude modulation of a low-pass signal, it is shown that the corresponding bandpass signal may be recovered from its samples taken at a uniform rate which is equal to or less than half the sampling rate called for in applying the classical bandpass sampling theorem.     

Signal Reconstruction from the Output Phases and Magnitudes of Two-Dimensional Filters

Algorithms are presented for reconstruction of a two-dimensional complex signal by knowing the phases and magnitudes of different filtered versions of the signal for a special class of filters. The algorithms have simple geometric interpretation and are easily extended to N-dimensional systems.     

A Statistical Glint/Radar Cross Section Target Model

We review the details of the glint (angular scintillation) problem in electromagnetic scattering. These results are employed to develop a statistical glint and radar cross section (RCS) target model featuring the correct glint probability density function, the correct time correlations of RCS and glint, and the correct cross correlation between RCS and glint. This model is suitable for simulation applications, and an implementation scheme for a glint/RCS signal generator is included.     

Comments, with reply, on `Optimal detection and performance ofdistributed sensor systems'

The commenter observes that the general solution proposed in the above paper (see ibid., vol.AES-23, no.1, p.24-30, Jan. 1988) for the global optimization of a distributed sensor detection system with fusion leads to coupled equations whose solution is a formidable computational task. This necessitated several simplifying assumptions that he comments on here. In response, the authors review the extent of the equal local threshold assumption throughout the work and make comments on the numerical performance comparison they gave there     

Development of the design scheme of cooling for a nozzle vane of high pressure turbine of gas turbine engine

The design schemes of cooling for the nozzle blades of high-temperature gas turbines are considered. The results of the thermal and hydraulic tests for the cooling systems of the nozzle vanes are presented. The prospective cooling system of the nozzle vanes of low and high pressure turbines is developed and presented. The test results for the vane with proposed design are presented.