New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

载人航天器放电调节器稳定性研究

电源系统的稳定性是保证载人航天器在轨飞行可靠安全的要素之一。文章研究了应用混合型功率调节技术的电源系统放电调节器的建模方法,获得了系统开环传递函数,进行了仿真验证,在此基础上分析了影响放电调节器稳定性的因素,表明系统中存在过大的延迟会使系统的稳定性大幅降低甚至造成不稳定,地面试验结果验证了此结论的正确性。     

Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.     

Stochastic processes for line shapes and intensities

Stochastic processes provide flexible and fast calculations for modeling dynamical interactions between an atom and charged particles. We use a stochastic renewal process for the plasma microfield being the cause of Stark broadening. The accuracy and improvement possibilities of Lyman profiles calculations with a renewal process are analyzed by comparing to ab initio simulations for ion broadening only. Stochastic processes may also be applied to out of equilibrium plasmas. We present our first results for the effect of Langmuir waves on a line broadened by electrons only, and for the changes of atomic populations submitted to strong temperature fluctuations.     

遗传算法综合阵列的幅度和相位方向图

分析了阵列方向图分别为对称、实的或实的且对称时所对应的单元激励关系,简要介绍了遗传算法,并将其用于阵列方向图综合.遗传算法是一种自适应全局优化概率搜索算法,它直接以目标函数作为搜索信息.通过合理地设计目标函数,遗传算法不仅可以综合幅度方向图,还可以综合相位,适合于需要进行幅度和相位补偿的情况,以及多目标的情况.最后,结合平顶波束方向图与抛物面天线初级馈源的正割平方方向图进行综合,证明了遗传算法的有效性和灵活性,说明使用遗传算法时尽量利用方向图的实的或对称特性,可以减少待优化变量的数目,加快收敛.并提出将传统遗传算法与传统方向图综合方法相结合,可以进一步减少得到最优解所需要的进化代数.     

捷联式天线稳定平台动力学建模与仿真分析

对于体积有限制的战术导弹应用,导引头天线伺服系统的体积受到严格限制,传统的速率陀螺稳定平台的应用受到挑战,为此提出采用捷联稳定方式来解决视线稳定问题.根据弹载捷联式天线平台的结构特点及稳定原理,应用坐标变换方法,完整地建立了两自由度捷联式天线平台的运动学与动力学模型.通过分析平台框架运动学耦合关系,表明捷联稳定方式与速率陀螺稳定方式的基本区别在于信息的获取和控制方式上,速率陀螺稳定方式是一种直接硬件稳定方法,而捷联稳定方式是一种软件补偿方法.在此基础上,对框架动力学耦合特性进行了数值仿真,结果表明:弹体对框架的耦合较强,需要进行弹体解耦,而框架之间的交叉耦合相对较弱,实际设计时可以忽略.所得结果为进一步研究捷联式天线稳定平台提供了理论基础,也为小型化导引头视线稳定平台系统的工程设计提供了一种解决方案.     

厚度和环境对复合涂层导电性能的影响

为了给数字化刻铣曲面频率选择表面(FSS)结构的制作和加工提供参考和依据,对比研究了含片状银粉颗粒的聚氨酯基和环氧树脂基2种复合导电涂层的基本性能,并通过环境加速试验,重点研究了温度、湿度以及腐蚀气氛对2种导电涂层的界面强度、微观结构和导电性能的影响.通过电桥法测量涂层表面电阻的变化,并通过扫描电境观察环境试验前后,涂层表面和剖面的微观结构和形貌变化.试验结果表明:聚氨酯基涂层的综合性能优于环氧树脂基涂层;在实验所涉及的参数变化范围内,环境因素对2种涂层与基体的界面结合影响不大,但对其导电性能的影响比较明显.环境因素对导电性能的削弱作用,源于相应过程中导电涂层的微观结构损伤.     

航天器热故障诊断专家系统推理机的设计

航天器在飞行过程中,经常发生各种故障,因此需要充分进行地面模拟试验.在航天器地面热试验的故障分析过程中,除了形成了可供故障诊断用的规则以外,还得到了许多具体的事例.后者很难用规则来准确地描述,但却是人类专家最珍贵的经验,必须加以利用.据此提出了基于事例推理和基于规则推理的混合推理机制,给出了具体的流程图,并就两种推理给出了相应的冲突消解策略.     

空间高阶差分近似对三维ADI-FDTD数值色散的影响

研究采用空间高阶差分近似的三维交替方向隐式时域有限差分法(ADI-FDTD,Alternating-Direction Implicit Finite-Difference Time-Domain)数值色散问题,首先推导了采用空间高阶差分近似的数值色散迭代公式,分别对最小相速方向和最大相速方向进行二阶、四阶、六阶、十阶空间差分数值色散误差的数值计算和比较,并分析数值色散对空间差分阶数的依赖关系,最后发现在均匀网格中采用四阶空间差分能得到较好的效果.