Pilots for space tourism

This article sheds light on the key player needed for any space tourism adventure: the pilot who flies the spacecraft. The paper addresses the potential benefits of including a pilot at the controls when designing a space tourism spacecraft. It examines the basic qualifications and advanced skills required of space tourism pilots and discusses key training requirements for selected pilots and space pilots' pay and benefits. In addition, the research concludes that, just as the pioneers of passenger transport in aviation entertained and captured the interest of their passengers, the space pilot should have the skills of a tour guide.     

Mercury’s Weather-Beaten Surface: Understanding Mercury in the Context of Lunar and Asteroidal Space Weathering Studies

Mercury’s regolith, derived from the crustal bedrock, has been altered by a set of space weathering processes. Before we can interpret crustal composition, it is necessary to understand the nature of these surface alterations. The processes that space weather the surface are the same as those that form Mercury’s exosphere (micrometeoroid flux and solar wind interactions) and are moderated by the local space environment and the presence of a global magnetic field. To comprehend how space weathering acts on Mercury’s regolith, an understanding is needed of how contributing processes act as an interactive system. As no direct information (e.g., from returned samples) is available about how the system of space weathering affects Mercury’s regolith, we use as a basis for comparison the current understanding of these same processes on lunar and asteroidal regoliths as well as laboratory simulations. These comparisons suggest that Mercury’s regolith is overturned more frequently (though the characteristic surface time for a grain is unknown even relative to the lunar case), more than an order of magnitude more melt and vapor per unit time and unit area is produced by impact processes than on the Moon (creating a higher glass content via grain coatings and agglutinates), the degree of surface irradiation is comparable to or greater than that on the Moon, and photon irradiation is up to an order of magnitude greater (creating amorphous grain rims, chemically reducing the upper layers of grains to produce nanometer-scale particles of metallic iron, and depleting surface grains in volatile elements and alkali metals). The processes that chemically reduce the surface and produce nanometer-scale particles on Mercury are suggested to be more effective than similar processes on the Moon. Estimated abundances of nanometer-scale particles can account for Mercury’s dark surface relative to that of the Moon without requiring macroscopic grains of opaque minerals. The presence of nanometer-scale particles may also account for Mercury’s relatively featureless visible–near-infrared reflectance spectra. Characteristics of material returned from asteroid 25143 Itokawa demonstrate that this nanometer-scale material need not be pure iron, raising the possibility that the nanometer-scale material on Mercury may have a composition different from iron metal [such as (Fe,Mg)S]. The expected depletion of volatiles and particularly alkali metals from solar-wind interaction processes are inconsistent with the detection of sodium, potassium, and sulfur within the regolith. One plausible explanation invokes a larger fine fraction (grain size <45 μm) and more radiation-damaged grains than in the lunar surface material to create a regolith that is a more efficient reservoir for these volatiles. By this view the volatile elements detected are present not only within the grain structures, but also as adsorbates within the regolith and deposits on the surfaces of the regolith grains. The comparisons with findings from the Moon and asteroids provide a basis for predicting how compositional modifications induced by space weathering have affected Mercury’s surface composition.     

Propagating MHD Waves in Coronal Holes

Coronal holes are the coolest and darkest regions of the upper solar atmosphere, as observed both on the solar disk and above the solar limb. Coronal holes are associated with rapidly expanding open magnetic fields and the acceleration of the high-speed solar wind. During the years of the solar minima, coronal holes are generally confined to the Sun??s polar regions, while at solar maxima they can also be found at lower latitudes. Waves, observed via remote sensing and detected in-situ in the wind streams, are most likely responsible for the wind and several theoretical models describe the role of MHD waves in the acceleration of the fast solar wind. This paper reviews the observational evidences of detection of propagating waves in these regions. The characteristics of the waves, like periodicities, amplitude, speed provide input parameters and also act as constraints on theoretical models of coronal heating and solar wind acceleration.     

Optimum parameters of a gravitational satellite-stabilizer system

Dynamics of a satellite-stabilizer system is studied. It is supposed that there is a viscous friction in a hinge connecting two bodies, but there is no elasticity. The attitude motion in a plane of circular orbit is considered, and parameters are determined, at which natural oscillations near a stable equilibrium position in the orbital coordinate system are damped out most rapidly. The rate of transient processes is estimated by a value of the degree of stability of linearized equations of motion. The optimization of the degree of stability is sequentially performed in dimensionless damping coefficient (the first stage) and in inertial system parameters (the second stage). The result of the first stage is the partition of system parameter space into the regions, in each of which the maximum of the degree of stability is reached on a particular configuration of roots of the characteristic equation. It is shown at the second stage that the global maximum is reached at two points of parameter space, where one of system bodies degenerates into a plate, and the characteristic equation has four equal real roots.     

Influence of microgravity on mitogen binding and cytoskeleton in Jurkat cells.

The effects of microgravity on Jurkat cells--a T-lymphoid cell line--was studied on a sounding rocket flight. An automated pre-programmed instrument permitted the injection of fluorescent labelled concanavalin A (Con A), culture medium and/or fixative at given times. An in-flight 1 g centrifuge allowed the comparison of the data obtained in microgravity with a 1 g control having the same history related to launch and re-entry. After flight, the cells fixed either at the onset of microgravity or after a or 12 minute incubation time with fluorescent concanavalin A were labelled for vimentin and actin and analysed by fluorescence microscopy. Binding of Con A to Jurkat cells is not influenced by microgravity, whereas patching of the Con A receptors is significantly lower. A significant higher number of cells show changes in the structure of vimentin in microgravity. Most evident is the appearance of large bundles, significantly increased in the microgravity samples. No changes are found in the structure of actin and in the colocalisation of actin on the inner side of the cell membrane with the Con A receptors after binding of the mitogen.     

Enhancing Maintainability of the AWG-10 Through Built-In-Test Equipment

Multimode airborne weapons systems are now a reality. Because of the increased complexity of these systems, excessive maintenance time has become a problem. This paper describes an approach to reducing maintenance time through the use of semiautomatic built-in-test equipment within the framework of an integrated maintenance program. Emphasis is placed on the methods and hardware involved in the built-in-test mechanization as well as describing the development history of this type of maintenance concept.     

Design of Zigzag FM Signals

Since no practical method is available for synthesizing radar waveforms, a sizable effort has been directed into studies of the matched-filter response, or ambiguity function, of many waveforms. In this paper, we investigate the class of FM signals whose instantaneous frequency varies in a zigzag pattern. The waveforms thus consist of linear FM segments and are relatively easy to generate and process. The paper discusses the relation between the characteristics of the waveform and the features of the associated ambiguity function. The effects studied include those of signal repetition, changes in the FM slope, phase-shift and frequency-shift coding, and staggering of frequency step and segment duration. Ambiguity functions of interesting waveforms illustrate the general results. These ambiguity functions are computer-plotted projections of the three-dimensional surface above the delay-Doppler plane.     

Statistical study of interplanetary condition effect on geomagnetic storms: 2. Variations of parameters

We investigate the behavior of mean values of the solar wind’s and interplanetary magnetic field’s (IMF) parameters and their absolute and relative variations during the magnetic storms generated by various types of the solar wind. In this paper, which is a continuation of paper [1], we, on the basis of the OMNI data archive for the period of 1976–2000, have analyzed 798 geomagnetic storms with D _st ≤ −50 nT and their interplanetary sources: corotating interaction regions CIR, compression regions Sheath before the interplanetary CMEs; magnetic clouds MC; “Pistons” Ejecta, and an uncertain type of a source. For the analysis the double superposed epoch analysis method was used, in which the instants of the magnetic storm onset and the minimum of the D _st index were taken as reference times. It is shown that the set of interplanetary sources of magnetic storms can be sub-divided into two basic groups according to their slowly and fast varying characteristics: (1) ICME (MC and Ejecta) and (2) CIR and Sheath. The mean values, the absolute and relative variations in MC and Ejecta for all parameters appeared to be either mean or lower than the mean value (the mean values of the electric field E _y and of the B _z component of IMF are higher in absolute value), while in CIR and Sheath they are higher than the mean value. High values of the relative density variation sN/〈N〉 are observed in MC. At the same time, the high values for relative variations of the velocity, B _z component, and IMF magnitude are observed in Sheath and CIR. No noticeable distinctions in the relationships between considered parameters for moderate and strong magnetic storms were observed.