Observations of diffuse galactic positron annihilation radiation

The Galactic plane was scanned nearly three times by the UCSD/MIT Hard X-Ray and Low Energy Gamma-Ray Experiment on HEAO-1 from August 1977 through September 1978. Its Medium Energy Detectors were of the NaI/CsI phoswich type and operated over the 100 keV to 2 MeV range, with a 17° FWHM field of view and a 9% energy resolution at 511 keV. Sky maps for each epoch of observation were constructed in several energy bands. After subtraction of known point sources, a component associated with the galactic plane remains, whose spectrum is consistent with a power law and a positron annihilation spectrum. In the 333 to 583 keV energy band the flux is concentrated within ±35° of the galactic center, and the ratio of flux/radian (anticenter) is high, with a 2σ lower limit of 13. The parameters of the galactic center region's annihilation spectrum are positronium fraction of 0.9±0.1 and 511 keV flux of (2.0±0.7)×10⁻³ photons/cm²-sec-rad.     

强磁暴期间TIEGCM模式与CHAMP卫星热层大气密度的比较分析

利用NCAR-TIEGCM模式计算了2003年11月20—21日强磁暴期间410km高度上的大气密度,并与CHAMP/STAR加速度计反演数据进行对比和分析. 结果表明,模式结果能够准确反映磁暴期间大气密度的分布和变化情况,与实测结果在变化趋势和量级上具有较好的一致性,但在精细结构和数值大小上仍存在一定差异. 模式低估了磁暴期间大气密度的增幅,实测大气密度增幅高达250%～400%,而模式结果为100%～125%. 模式结果与实测数据的偏差在高纬地区高于低纬地区,日侧高于夜侧. 通过模式和实测数据的分析发现,磁暴期间大气密度扰动具有日夜侧和南北半球不对称性. 此外,模式能够准确反映磁暴期间大气密度扰动从高纬向低纬的传播以及大气密度对SYM-H指数响应的延迟特性.     

The Extreme Ultraviolet Imager Investigation for the IMAGE Mission

The Extreme Ultraviolet Imager (EUV) of the IMAGE Mission will study the distribution of He⁺ in Earth's plasmasphere by detecting its resonantly-scattered emission at 30.4 nm. It will record the structure and dynamics of the cold plasma in Earth's plasmasphere on a global scale. The 30.4-nm feature is relatively easy to measure because it is the brightest ion emission from the plasmasphere, it is spectrally isolated, and the background at that wavelength is negligible. Measurements are easy to interpret because the plasmaspheric He⁺ emission is optically thin, so its brightness is directly proportional to the He⁺ column abundance. Effective imaging of the plasmaspheric He⁺ requires global `snapshots in which the high apogee and the wide field of view of EUV provide in a single exposure a map of the entire plasmasphere. EUV consists of three identical sensor heads, each having a field of view 30° in diameter. These sensors are tilted relative to one another to cover a fan-shaped field of 84°×30°, which is swept across the plasmasphere by the spin of the satellite. EUVs spatial resolution is 0.6° or 0.1 R _E in the equatorial plane seen from apogee. The sensitivity is 1.9 count s^–1 Rayleigh^–1, sufficient to map the position of the plasmapause with a time resolution of 10 min.     

基于半实物仿真的地磁导航等值线匹配算法评估

影响地磁导航匹配算法性能的因素很多,而现阶段算法的评估完全依靠计算机仿真,其可信性有待进一步验证.以等值线(ICCP)算法为研究对象,首先从理论上分析影响算法性能的因素;然后搭建了地磁匹配导航半实物仿真系统,通过引入磁场仿真环境和磁传感器,提高了仿真的可信度;最后从测量噪声、匹配长度、匹配区域和惯导误差4个方面对ICCP 匹配算法的性能进行半实物仿真试验分析.仿真结果表明,通过半实物仿真试验可以对算法的抗干扰性、算法匹配长度的确定、匹配区域的选择以及惯导误差的影响做出有效评估,从而推动地磁匹配导航及匹配算法的工程化进程.      

Gravity and perceptual stability during translational head movement on earth and in microgravity

We measured the amount of visual movement judged consistent with translational head movement under normal and microgravity conditions. Subjects wore a virtual reality helmet in which the ratio of the movement of the world to the movement of the head (visual gain) was variable. Using the method of adjustment under normal gravity 10 subjects adjusted the visual gain until the visual world appeared stable during head movements that were either parallel or orthogonal to gravity. Using the method of constant stimuli under normal gravity, seven subjects moved their heads and judged whether the virtual world appeared to move “with” or “against” their movement for several visual gains. One subject repeated the constant stimuli judgements in microgravity during parabolic flight. The accuracy of judgements appeared unaffected by the direction or absence of gravity. Only the variability appeared affected by the absence of gravity. These results are discussed in relation to discomfort during head movements in microgravity.     

一种基于多维空间超球体的快速聚类算法

提出了一种基于多维空间超球体的快速聚类算法。这种算法结合密度聚类和层次聚类两种思想。首先利用密度聚类方法将小范围内的数据对象聚合成超球体,然后再按照层次聚类中的凝聚思想,根据超球体之间的位置关系产生最终聚类。实验表明,该算法对于数值型数据集不仅在效率、噪声敏感性等方面均有较好的表现,同时还可以通过诸如“双环测试”等带有刁难性的特殊测试集。以往,常常简单的以距离来刻画的数据间“相似性”,而所提出的快速聚类算法则改由超球体之间连接的紧密程度来描述这种性质。实验表明,这种修改使得算法的性能得到了很好的改善。     

Preliminary calibration results of VEGA 1 and 2 SIGMA-3 gas chromatograph

SIGMA - 3 gas chromatograph on board VEGA 1 and 2 landing probes has been operated successfully in the 60 - 50 km altitude range, providing several in - situ chemical analysis of the gas and the aerosols of Venus cloud layers. Post flight calibration required to derive atmospheric abundancies from gas chromatograms were carried out using the SIGMA - 3 spare model. A Venus atmospheric aerosol simulation chamber was used in which sulfuric acid droplets were generated. Preliminary results of these calibration experiments indicate that the concentration of sulfuric acid in the upper part of the clouds ( 60 to 55 km) is about 1 mg/m³ and suggest that an additional constituant must be present in noticeable amount in the aerosols. From these experiments the mixing ratio upper limits of SO₂ is 100 ppmV and of H₂S and COS is few 10 ppmV.     

Investigations of the Mars Upper Atmosphere with ExoMars Trace Gas Orbiter

Space Science Reviews - Time measured by an ideal clock crucially depends on the gravitational potential and velocity of the clock according to general relativity. Technological advances in...     

Estimated Flight Time for Optimum Trajectories

Various methods are presented for estimating the flight time for vehicles which fly an optimum trajectory. A realistic example is considered in order to display the inherent accuracy of each of these methods. Numerical integration methods are found to be the most accurate. Simple formulas are derived for the case where a less accurate estimate is acceptable. All of these methods require less computation than would be required in order to solve the overall optimization problem. Thus any one of these methods can be applied to an onboard guidance scheme or control system which requires a real time estimate of the time-to-go.     

Ground and on-orbit command and data handling architectures for the Active Rack Isolation System microgravity flight experiment

The Active Rack Isolation System [ARIS] International Space Station [ISS] Characterization Experiment, or ARIS-ICE for short, is a long duration microgravity characterization experiment aboard the ISS. The objective of the experiment is to fully characterize active microgravity performance of the first ARIS rack deployed on the ISS. Efficient ground and on-orbit command and data handling [C&DH] segments are the crux in achieving the challenging objectives of the mission. The objective of the paper is to provide an overview of the C&DH architectures developed for ARIS-ICE, with the view that these architectures may serve as a model for future ISS microgravity payloads. Both ground and on-orbit segments, and their interaction with corresponding ISS C&DH systems are presented. The heart of the on-orbit segment is the ARIS-ICE Payload On-orbit Processor, ARIS-ICE POP for short. The POP manages communication with the ISS C&DH system and other ISS subsystems and payloads, enables automation of test/data collection sequences, and provides a wide range of utilities such as efficient file downlinks/uplinks, data post-processing, data compression and data storage. The hardware and software architecture of the POP is presented and it is shown that the built-in functionality helps to dramatically streamline the efficiency of on-orbit operations. The ground segment has at its heart special ARIS-ICE Ground Support Equipment [GSE] software developed for the experiment. The software enables efficient command and file uplinks, and reconstruction and display of science telemetry packets. The GSE software architecture is discussed along with its interactions with ISS ground C&DH elements. A test sequence example is used to demonstrate the interplay between the ground and on-orbit segments.