Scientific ballooning services

The services available for scientific ballooning are described with special emphasis on the facilities of the NCAR Balloon Flight Station at Palestine, Texas. The preparations for a typical launching, the operations during the launch, the flight and the recovery are described for illustrative purposes. Considerations on the future development of scientific ballooning are given; technological problems for extended flights are considered to be less serious than the political problems.     

On the stability of spinning satellites

We study the directional stability of rigid and deformable spinning satellites in terms of two attitude angles. The linearized attitude motion of a free system about an assumed uniform-spin reference solution leads to a generic MGK system when the satellite is rigid or deformable. In terms of Lyapunov’s stability theory, we investigate the stability with respect to a subset of the variables. For a rigid body, the MGK system is 6-dimensional, i.e., 3 rotational and 3 translational variables. When flexible parts are present the system can have any arbitrary dimension. The 2×2 McIntyre–Myiagi stability matrix gives sufficient conditions for the attitude stability. A further development of this method has led to the Equivalent Rigid Body method. We propose an alternative practical method to establish sufficiency conditions for directional stability by using the Frobenius–Schur reduction formula. As practical applications we discuss a spinning satellite augmented with a spring–mass system and a rigid body appended with two cables and tip masses. In practice, the attitude stability must also be investigated when the spinning satellite is subject to a constant axial thrust. The generic format becomes MGKN as the thrust is a follower force. For a perfectly aligned thrust along the spin axis, Lyapunov’s indirect method remains valid also when deformable parts are present. We illustrate this case with an apogee motor burn in the presence of slag. When the thrust is not on the spin axis or not pointing parallel to the spin axis, the uniform-spin reference motion does not exist and none of the previous methods is applicable. In this case, the linearization may be performed about the initial state. Even when the linearized system has bounded solutions, the non-linear system can be unstable in general. We illustrate this situation by an instability that actually happened in-flight during a station-keeping maneuver of ESA’s GEOS-I satellite in 1979.     

Theory of Scalloping Amplitude Errors in Standard VOR Bearing Indications

A rigorous theory is developed for the course scalloping amplitudes observed in the bearing indications of an airborne standard VOR receiver in the presence of multipath signals. The VOR transmitting antenna pattern characteristics, the scattering properties of the multipath source, and the effects of ground reflection are all built into the theory so that their combined effects on the scalloping may be quantitatively investigated. The analysis assumes that the VOR receiver characteristics are ideal.     

Identification of Rotating Assembly Inertial and Bearing Parameters

The problem of estimating the state of a turbopump rotating assembly and identifying unknown products of inertia and unknown bearing parameters is considered. A linearized, extended Kalman filtering approach has been used and found to be successful for both state estimation and parameter identification in an inherently nonlinear problem. The input data was simulated Bently test data which was obtained from a verified 12-dimensional state-space model and was compared with real Bently test data obtained from NASA. The results prove the feasibility of using this model and this type of test data to obtain the hidden parameters of a typical turbopump rotating assembly. This method should lead to improved performance by allowing improved balancing of the rotor and giving improved knowledge of the bearing reactions.     

Compact antennas for UWB applications

A report on an investigation of spherical, disc, and half-disc antennas in the frequency and time domains with the objective of developing small planar versions of the antennas. These antennas have an omni-directional impulse response in azimuth and pulse duration of 0.5-0.65 nanoseconds. In addition, the measured data show a reasonable peak received signal in a pulse communication link using two identical antennas.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.     

A Nominator-Selector Two-Stage Signal Detection Scheme

A two-stage approach to computationally efficient signal detection is to nominate candidate signal vectors using a suboptimal, but computationally cheap, detection scheme, and subsequently perform optimal detection on the candidates. Bounds on the detection performance of this approach are presented along with sufficient conditions for optimality. Examples are presented of an optimal and nearly optimal two-stage detection scheme where computational costs are drastically reduced relative to the singli-stage optimal detector.     

Revised upper limit on the internal magnetic moment of Venus

Over four Venus years of low altitude nightside PVO magnetometer observations are used to establish a new upper limit for the magnetic moment of Venus. Improvements over previous studies include data coverage and new instrument calibration information. The upper limit on an internal dipole moment is determined to be 8.4 × 10¹⁰ T m³.     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

Space Weather applications with CDPP/AMDA

AMDA (Automated Multi-Dataset Analysis), a new data analysis service, recently opened at the French Plasma Physics Data Center (CDPP). AMDA is developed according to the Virtual Observatory paradigm: it is a web-based facility for on-line analyses of space physics. Data may come from its own local database as well as remote ones. This tool allows the user to perform classical manipulations such as data visualization, parameter computation and data extraction. AMDA also offers innovative functionalities such as event searches on the content of the data in either visual or automated ways, generation, use and management of time tables (event lists). The general functionalities of AMDA are presented in the context of Space Weather with example scientific use cases.