基于马尔科夫链模型的脉动装配线运行状态预测

分析了影响脉动生产线运行的因素和状态预测的必要性,提出了基于马尔科夫链模型的状态预测方法。基于马尔科夫链预测理论,对脉动生产线运行状态划分,确定状态转移矩阵,建立马尔科夫预测模型,并对模型准确性进行验证。     

复合材料加筋壁板制造成本的快速估算模型

为了能够在设计阶段早期对复合材料加筋壁板制造成本进行快速估算,提出了一种以结构设计重量为主要驱动因素的制造成本估算模型。该模型的关键是考虑了诸如材料成本比重系数、制造工艺系数、蒙皮形状系数、筋条形状系数、材料利用率系数等合理取值。以某验证试验的试验件制造成本估算为例,估算成本与实际制造成本的偏差为10.8%,说明了采用该方法对复合材料加筋壁板制造成本进行快速估算的结果是可以为设计人员提供决策依据的。     

AZ91镁合金搅拌摩擦加工后的组织与性能

采用400rpm-100mm/min,800rpm-100mm/min,800rpm-200mm/min三种工艺参数对铸态AZ91镁合金进行搅拌摩擦加工(FSP)处理,并对合金加工前后的显微组织和拉伸性能及微观断裂机制进行分析。结果表明,经800rpm-100mm/min工艺FSP处理后,合金的显微组织明显细化,延伸率和抗拉强度显著提高,综合拉伸性能最好,且拉伸断口主要表现为韧性断裂的特征。这主要是由于在FSP过程中合金发生动态再结晶,使合金晶粒显著细化及粗大β相的溶解和破碎所致。     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

Method of designing a neural controller for the automatic lateral control of unmanned aerial vehicles

The paper discusses a method of designing the neural controller for two-channel control of a technical object by an example of the roll and yaw control depending on deviations, velocities and accelerations of their variation.     

The adjustment of the mathematical model accuracy of the gas-hydraulic flight control actuator power circuit of an aircraft

The methodology is proposed and the mathematical model is developed for the purpose of numerical simulation of the power circuit of the gas-hydraulic actuator with displacing power source for the gimbaled nozzle control. It provides the highest power efficiency factor of the actuator as a part of aircraft by means of pulling together the profiles of available and required power.     

The Far Ultra-Violet Imager on the Icon Mission

ICON Far UltraViolet (FUV) imager contributes to the ICON science objectives by providing remote sensing measurements of the daytime and nighttime atmosphere/ionosphere. During sunlit atmospheric conditions, ICON FUV images the limb altitude profile in the shortwave (SW) band at 135.6 nm and the longwave (LW) band at 157 nm perpendicular to the satellite motion to retrieve the atmospheric O/N₂ ratio. In conditions of atmospheric darkness, ICON FUV measures the 135.6 nm recombination emission of \(\mathrm{O}^{+}\) ions used to compute the nighttime ionospheric altitude distribution. ICON Far UltraViolet (FUV) imager is a Czerny–Turner design Spectrographic Imager with two exit slits and corresponding back imager cameras that produce two independent images in separate wavelength bands on two detectors. All observations will be processed as limb altitude profiles. In addition, the ionospheric 135.6 nm data will be processed as longitude and latitude spatial maps to obtain images of ion distributions around regions of equatorial spread F. The ICON FUV optic axis is pointed 20 degrees below local horizontal and has a steering mirror that allows the field of view to be steered up to 30 degrees forward and aft, to keep the local magnetic meridian in the field of view. The detectors are micro channel plate (MCP) intensified FUV tubes with the phosphor fiber-optically coupled to Charge Coupled Devices (CCDs). The dual stack MCP-s amplify the photoelectron signals to overcome the CCD noise and the rapidly scanned frames are co-added to digitally create 12-second integrated images. Digital on-board signal processing is used to compensate for geometric distortion and satellite motion and to achieve data compression. The instrument was originally aligned in visible light by using a special grating and visible cameras. Final alignment, functional and environmental testing and calibration were performed in a large vacuum chamber with a UV source. The test and calibration program showed that ICON FUV meets its design requirements and is ready to be launched on the ICON spacecraft.     

Electronic technical manual development

In the past, Air Force technical manuals have been stored in libraries containing many volumes of such manuals. This article details the creation and development of an Electronic Technical Manual for the F-16 Analog Test Station Sustainment (FATSS) Project. The manual will allow users to search a single CD-ROM to access data on maintenance, operational procedures, self-test, calibration, schematics, and illustrated parts breakdowns     

Thick galactic cosmic radiation shielding using atmospheric data

NASA is concerned with protecting astronauts from the effects of galactic cosmic radiation and has expended substantial effort in the development of computer models to predict the shielding obtained from various materials. However, these models were only developed for shields up to about 120 g/cm² in mass thickness and have predicted that shields of this mass thickness are insufficient to provide adequate protection for extended deep space flights. Consequently, effort is underway to extend the range of these models to thicker shields and experimental data is required to help confirm the resulting code. In this paper empirically obtained effective dose measurements from aircraft flights in the atmosphere are used to obtain the radiation shielding function of the Earth's atmosphere, a very thick, i.e. high mass, shield. Obtaining this result required solving an inverse problem and the method for solving it is presented. The results are shown to be in agreement with current code in the ranges where they overlap. These results are then checked and used to predict the radiation dosage under thick shields such as planetary regolith and the atmosphere of Venus.