机载雷达系统中的空—时自适应处理

本文概述了空—时自适应处理(STAP)在现代雷达系统中，尤其是在强干涉和人为干扰下的机载雷达系统中的应用情况。简要介绍处理方法后，叙述了STAP在导致非平稳信号环境的热杂波和非均匀雷达环境中STAP的应用结果。分析了在这种实际情况下采用STAP处理所存在的局限。结尾部分为使用圆形阵列所得到的一些STAP近期结果。     

Voluntary head stabilization in space during trunk movements in weightlessness

The ability to voluntarily stabilize the head in space during lateral rhythmic oscillations of the trunk has been investigated during parabolic flights. Five healthy young subjects, who gave informed consent, were examined. The movements were performed with eyes open or eyes closed, either during phases of microgravity or phases of normal gravity. The main result to emerge from this study is that the head may be stabilized in space about the roll axis under microgravity conditions with, as well as without vision, despite the reduction of the vestibular afferent and the muscle proprioceptive inputs. Moreover, the absence of head stabilization about the yaw axis confirms that the degrees of freedom of the neck can be independently controlled, as it was previously shown [1]. These results seem to indicate that voluntary head stabilization does not depend crucially upon static vestibular afferents. Head stabilization in space may be in fact organized on the basis of either dynamic vestibular afferents or a postural body scheme.     

航天发动机用的钛合金壳体

自从60年代初期以来,6Al—4V钛合金就被广泛地用于航天发动机壳体。本文描述了钛合金火箭发动机壳体(其最小极限抗拉强度的设计值达到175,000磅/英寸~2。)从锻件到加工成产品的工艺制造过程。对设计经验和该产品独特的工艺控制过程,如热处理和金相检验,也给予评论。本文对钛合金压力容器的优点,如多次使用、推力向量校准以及附加法兰和部件易于组合等,都作了介绍。     

The ankle ergometer: a new tool for quantifying changes in mechanical properties of human muscle as a result of spaceflight

A mechanical device for studying changes in mechanical properties of human muscle as a result of spaceflight is presented. Its main capacities are to allow during a given experiment investigation of both contractile and visco-elastic properties of a musculo-articular complex using respectively isometric contractions, isokinetic movements, quick-release tests and sinusoidal perturbations. This device is a motor driven ergometer associated to an experimental protocol designed for pre- and post-flight experiments. As microgravity preferentially affects postural muscles, the apparatus was designed to test muscle groups crossing the ankle joint. Three subjects were tested during the Euromir '94 mission. Preliminary results obtained on the european astronaut are briefly reported. During the next two years the experiments will be performed during six missions.     

New methods for microbial contamination monitoring: an experiment on board the MIR orbital station

Experiment T2, carried out during the Euromir'95 mission, was an important step toward innovative methods for spacecraft microbial contamination monitoring. A new standard sampling technique permitted samples to be analysed by different means. On board, two analysis methods were tested in parallel: Bioluminescence and Miniculture. In turn, downloaded samples are being analysed by polymerase chain reaction (PCR), a powerful and promising method for the rapid detection, identification and quantification of pathogens and biofouling agents in closed manned habitats.     

固体推进剂火箭发动机最大性能

目前,广泛地应用热化学模型预算发动机的最大性能,而且模型假定流场是一维的。然而,实验与计算表明,其内部流动可能具有显著的横向总压梯度,这将引起性能偏离一维流模型的计算结果。但在整体分析的范围内研究了这些影响。发现对有喷管的发动机是可以忽略的。     

Taxane recovery from cells of Taxus in micro- and hypergravity

Cell suspension cultures of Taxus cuspidata produce taxanes that are released from the outer surface of cells into the culture medium as free and bound alkaloids. Paclitaxel (Taxol (TM)), is an anti-cancer drug in short supply. It has a taxane ring derived from baccatin III and a C-13 phenylisoserine side-chain. This drug is produced over a wide range of gravitational forces. Monoclonal and polyclonal antibodies to paclitaxel, baccatin III, and the C-13 phenylisoserine side chain were combined in multiple-labeling studies to localize taxanes and paclitaxel on cell surfaces or on particles released into the culture medium. Bioreactor vessel design altered the composition of taxanes recovered from cells in simulated microgravity. At 10(-2) and 2x10(-4)g, taxane recovery was reduced but biomass growth and percent paclitaxel was significantly increased. At 1 to 24g, growth was reduced with a significant recovery of total taxanes with low percent paclitaxel. Bound paclitaxel was also localized in endonuclease-rich fragmenting nuclei of individual apoptotic cells. A model is presented comprising TCH (touch) genes encoding enzymes that modify taxane-bearing xylan residues in cell walls, the calcium-sensing of gravitational forces by the cytoplasm, and the predisposition of nuclei to apoptosis. This integrates the adaptive physiological and biochemical responses of drug-producing genomes with gravitational forces.     

Linear Shaped Charge Cutting Property and Charge Cutting Mechanism of Mg-Gd-Y-Zn Alloy

The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid components from aircrafts timely to achieve light-weight. Magnesium alloy is the lightest metal material, and can be used to cast effective light-weight components of an aircraft construction. However, the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank. In response to the demand for the linear separation of magnesium alloys, the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test. The effects of the shaped charge line density, cutting thickness, and mechanical properties on the cutting performance of the alloy are studied. The shaped charge cutting mechanism is analyzed through the notch structure. The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse. The higher the linear density is, the stronger the ability of the linear shaped charge cutter is, and the greater the penetration depth is, which is advantageous. However, the target structure will be damaged when it is too large (e.g., 4.5 g?m-1). Within 12 mm, when the cutting thickness of the target increases, the penetration depth increases. The lower the tensile strength is, the greater the penetration depth is, and the more conducive the penetration depth to the shaped charge cutting is. When the elongation (EL) increases to 12%, the collapse of the target is incomplete and the target cannot be separated. When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa, the EL is less than 6.5%, the cutting thickness is less than 12 mm, and the linear shaped charge cutting of the magnesium alloy can be achieved stably.     

INVESTIGATION ON CONTROL OF CHAOS

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＮＣＯＮＴＲＯＬＯＦＣＨＡＯＳＹｕＪｉａｎｚｕ（Ｄｅｐｔ．ｏｆＦｌｉｇｈｔＶｅｈｉｃｌｅＤｅｓｉｇｎａｎｄＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕ...     

Sugar synthesis from a gas-phase formose reaction

Prebiotic possibilities for the synthesis of interstellar ribose through a protic variant of the formose reaction under gas-phase conditions were studied in the absence of any known catalyst. The ion-molecule reaction products, diose and triose, were sought by mass spectrometry, and relevant masses were observed. Ab initio calculations were used to evaluate protic formose mechanism possibilities. A bilateral theoretical and experimental effort yielded a physical model for glycoaldehyde generation whereby a hydronium cation can mediate formaldehyde dimerization followed by covalent bond formation leading to diose and water. These results advance the possibility that ion-molecule reactions between formaldehyde (CH(2)O) and H(3)O(+) lead to formose reaction products and inform us about potential sugar formation processes in interstellar space.