动态三角翼的非定常气动特性和压力分布相关研究

文章介绍了不同后掠角三角翼在进行俯仰振荡时的动态压力特性,说明这种动态压力特性同三角翼的法向力的变化是密切相关的,试验研究揭示了流态、压力和气动力之间的密切关系。同时试验研究显示三角翼上翼面压力的动态变化曲线呈现出双峰形态;不同后掠角三角翼在动态试验过程中压力、法向力都具有相似特性。     

液体压力激波加工技术研究

机械产品的零部件，通常需要通过成形与改性才具有所需形状及实用功能，本文提出了一种新型材料成形与改性加工的方法——液体压力激波加工。采用脉冲超声波聚焦技术，通过压电陶瓷激波发生器在液体介质中产生高能瞬时压力激波，对材料进行冲击，产生变形或表面改性。经过理论研究和试验验证，初步掌握了液体压力激波的产生、激波能量的控制和激波加工的动力学机制。这种加工方法具有能量可控性好、成本低廉和安全高效等优点，非常适合具有复杂结构和型面的中小零件加工，是一种颇具竞争力的先进制造技术手段。     

捷联惯导系统的圆锥误差补偿算法研究

非互易向量的确定与补偿是影响高动态、恶劣振动环境下捷联惯性导航系统姿态矩阵计算的重要问题。为了补偿由此引起的圆锥误差，本文对一些传统算法进行了分析和研究。由于以往各种算法一般都需要输入信息为角度信息，但对于高动态、恶劣振动环境，角速度信息更有工程意义，所以针对输入信息为角速度的情形，提出了一类新的姿态算法，通过对比传统的算法，新算法在同样计算量、存储量的情况下有较优的性能，算法的精度较传统的算法高。另外，对新的姿态算法进行了误差分析．为其参数选择提供了选择标准，有工程实用价值。     

Estimated Flight Time for Optimum Trajectories

Various methods are presented for estimating the flight time for vehicles which fly an optimum trajectory. A realistic example is considered in order to display the inherent accuracy of each of these methods. Numerical integration methods are found to be the most accurate. Simple formulas are derived for the case where a less accurate estimate is acceptable. All of these methods require less computation than would be required in order to solve the overall optimization problem. Thus any one of these methods can be applied to an onboard guidance scheme or control system which requires a real time estimate of the time-to-go.     

全球卫星导航系统的脆弱性及其缓解办法

全球卫星导航系统(GNSS)是全球范围内的定位及授时系统,它包括一个或多个卫星星座、用户接收机、系统完好性监视系统及其他增强系统(如GBAS,SBAS等)。GNSS是对卫星导航系统的统称,如GPS、GLONASS、GBAS、SBAS、GALILEO等,若不特殊指明,则都统称为GNSS。目前,GNSS正在全球崭露头     

Recent developments in micrometeoroid simulation

In the first part the state of the art of the most advanced micrometeoroid simulation techniques is reviewed. Then a new accelerator is described, which was developed jointly by the Technische Universität München and the N.A.S.A. George C. Marshall Space Flight Center. Finally the use of this new technique is indicated for basic research in fields other than astronautics.     

Ground and on-orbit command and data handling architectures for the Active Rack Isolation System microgravity flight experiment

The Active Rack Isolation System [ARIS] International Space Station [ISS] Characterization Experiment, or ARIS-ICE for short, is a long duration microgravity characterization experiment aboard the ISS. The objective of the experiment is to fully characterize active microgravity performance of the first ARIS rack deployed on the ISS. Efficient ground and on-orbit command and data handling [C&DH] segments are the crux in achieving the challenging objectives of the mission. The objective of the paper is to provide an overview of the C&DH architectures developed for ARIS-ICE, with the view that these architectures may serve as a model for future ISS microgravity payloads. Both ground and on-orbit segments, and their interaction with corresponding ISS C&DH systems are presented. The heart of the on-orbit segment is the ARIS-ICE Payload On-orbit Processor, ARIS-ICE POP for short. The POP manages communication with the ISS C&DH system and other ISS subsystems and payloads, enables automation of test/data collection sequences, and provides a wide range of utilities such as efficient file downlinks/uplinks, data post-processing, data compression and data storage. The hardware and software architecture of the POP is presented and it is shown that the built-in functionality helps to dramatically streamline the efficiency of on-orbit operations. The ground segment has at its heart special ARIS-ICE Ground Support Equipment [GSE] software developed for the experiment. The software enables efficient command and file uplinks, and reconstruction and display of science telemetry packets. The GSE software architecture is discussed along with its interactions with ISS ground C&DH elements. A test sequence example is used to demonstrate the interplay between the ground and on-orbit segments.     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

One year old and growing: a status report of the International Space Station and its partners.

The International Space Station (ISS), as the largest international science and engineering program in history, features unprecedented technical, cost, scheduling, managerial, and international complexity. A number of major milestones have been accomplished to date, including the construction of major elements of flight hardware, the development of operations and sustaining engineering centers, astronaut training, and eight Space Shuttle/Mir docking missions. International partner contributions and levels of participation have been baselined, and negotiations and discussions are nearing completion regarding bartering arrangements for services and new hardware. As ISS is successfully executed, it can pave the way for more inspiring cooperative achievements in the future.     

An innovative approach for distributed and integrated resources planning for the Space Station Freedom

The widely distributed nature of the Space Station Freedom program, plus continuous multi-year operations will force program planners to develop innovative planning concepts. The traditional centralized planning operation will not be adequate. It will be replaced by multiple small planning centers working within guidelines issued by a central planning authority. Plans will not be optimized; rather, operating efficiency and user flexibility will be blended to satisfy program goals. The key to this new approach is the application of new planning methodologies and system development technologies to accommodate distributed resources that must be integrated. Resources will be distributed to the multiple planning entities in such a way that, when the several plans are built and then integrated, they will fit together with minimal modification. The plan itself will be an envelope schedule containing resource limits and constraint boundaries within which users will be free to make choices of the specific activities they will execute, up to the time of execution. Some level of margin within program guidelines will be built in to allow for variation and unforeseen change. This paper presents the authors' recommended planning approach and cites two NASA systems being developed that will utilize these resource distribution/integration planning concepts, methodologies and development technologies.