高热导率聚酰亚胺浸渍漆

文摘通过引入无机纳米粉体研制了高热导率聚酰亚胺浸渍漆,研究了聚酰亚胺的化学结构、无机粉体的种类、粒径和用量等因素对浸渍漆贮存稳定性以及固化物性能的影响。均苯四甲酸二酐与4,4′-二氨基二苯基醚合成的聚酰亚胺具有高的热导率。在联苯型聚酰亚胺中引入30%~35%、粒径为100~300 nm的α-A l2O3粉体,固化物的热导率可提高到0.65~0.80 W/(m.K),其余性能基本保持原有水平。     

A study on TEC reduction during the tail phase of the 21st June 2020 annular solar eclipse

Ionospheric response during the annular solar eclipse of June 21, 2020, has been examined in terms of the Total Electron Content (TEC) obtained from six Global Positioning System (GPS) receivers positioned in the Chinese-Taiwanese region. We have shown TEC variation from satellites designated by PRNs (Pseudo-Random Noise code) 2, 6, and 19. PRN wise TEC trend was observed to depend upon satellite-pass trajectory to the receiver's location during the eclipse period. A time lag of ~15–30 min is also observed in maximum TEC decrement after the phase of maximum eclipse. Instead of the percentage of eclipse magnitude, a reduction in TEC is seen more for the station for which the orbital track of respective satellites was in closer view relative to receivers for more hours of eclipse window. Additionally, the eclipse day diurnal variations are compared with the pre-eclipse day TEC trend, and observed results show a clear decrease in TEC values at all chosen stations after the eclipse onset then reached the lowest value a few minutes afterward the maximum eclipse phase.     

SAMI2 model results for the quiet time low latitude ionosphere over India

Efficacy of SAMI2 model for the Indian low latitude region around 75°E longitudes has been tested for different levels of solar flux. With a slight modification of the plasma drift velocity the SAMI2 model has been successful in reproducing quiet time ionospheric low latitude features like Equatorial Ionization Anomaly. We have also showed the formation of electron hole in the topside equatorial ionosphere in the Indian sector. Simulation results show the formation of electron hole in the altitude range 800–2500?km over the magnetic equator. Indian zone results reveal marked differences with regard to the time of occurrence, seasonal appearances and strength of the electron hole vis-a-vis those reported for the American equatorial region.     

涡桨教练机螺旋桨设计关键技术分析

涡桨教练机以其完美的节油特性越来越受用户青睐,本文就涡桨教练机推进部件螺旋桨的设计技术进行探讨。简要介绍了提高螺旋桨效率的一般技术,重点围绕提高螺旋桨效率以及影响全机气动特性的关键技术展开分析。     

The Indian EO Programme-national and global drivers

The Indian Earth Observations Program, over the past three decades, has been mainly driven by the national need for natural resources management, environment monitoring and disaster support. With an array of seven Indian Earth Observation Satellites, national development support has been provided through a well-knit institutional framework of a National Natural Resources Management System (NNRMS). A wide variety of applications have been developed as an inter-agency effort over the past 15 years. Now, the capacity of the programme has extended into the global arena and is providing operational data services to the global user community. Positioning of relevant policy guidelines for the EO program to contribute to national endeavor and its transitioning for global outreaching and development of a commercial enterprise — both at national and global levels has been an area of constant attention within ISRO.Issues related to defining the space and data acquisition as a national “public ground”, costing of data products and services and evolving a commercial Earth Observation policy have been addressed for providing the overall thrust of the Indian Earth Observations program. The paper discusses the evolution of the policy in the early stages and its transition today to support a two-pronged strategy of supporting national development support and at the same time, developing a commercial program. The paper also illustrates the success of these policy endeavors through specific cases of applications and development of value added services. The paper also brings out the potential policy adjustments that will be called for in the coming years.     

New approach for suppression of FM jamming in GPS receivers

A new approach is proposed for the suppression of FM jammers in C/A code GPS receivers. This approach is based on the cascading of the augmented-state approximate conditional mean (ASACM) filter and the discrete wavelet transform (DWT) filter. An ASACM filter for single interference suppression in spread-spectrum systems has been reported in the recent literature. However, the formulation of the ASACM filter and its performance analysis is lacking in the case of suppression of multiple FM interferences. The ASACM filter is formulated here for the suppression of multiple FM jammers. Further, a DWT filter using biorthogonal wavelet is suggested for the suppression of FM jammers. Finally, these two filters are cascaded to get an optimum performance for higher jammer to signal ratio, which is of importance in the GPS, for the case of suppression of multiple FM jammers. The performance of the proposed filters is analyzed through simulation examples for the suppression of single and multiple FM jammers in GPS receivers     

涡轮盘的破裂分析

某烟气轮机涡轮盘发生了盘缘断裂掉块事故,某航空发动机Ⅰ级涡轮盘也大量发生槽底裂纹的故障。我们对这两个盘的盘体和槽底部分用轴对称和平面8节点等参元有限元法对温度场(包括瞬态温度场)与应力场进行了计算,从而对涡轮盘在不同工作状态下的应力分布及故障原因进行了分析。本文着重阐述冷却条件对于涡轮应力分布是十分重要的,同时,不应忽视轮缘的应力水平,在某特定工作状态下,轮缘的应力值可能远远超过轮心,而且循环的应力幅值也很大,且由于载荷与几何形状的复杂性,在轮缘与榫齿的过渡段上出现较大的应力集中,往往成为裂纹源区;本文最后分析了轮缘残余应力形成及对槽底径向裂纹的生成与扩展的影响。     

Mechanical properties of ANTRIX balloon film and fabrication of single cap large volume balloons

The zero pressure plastic balloons used for high altitude studies are generally made from polyethylene material. Tensile properties of the thin film polymer are the key parameters for material selection due to extremely low temperature of −90 °C encountered by the balloons in the tropopause region during the ascent at equatorial latitudes. The physical and structural properties of the material determine the uniformity of the stress distribution over the entire shell. Load stresses from the suspended load propagate via load tapes heat sealed along with the gore seals as per the balloon design. A balance between this heat seal strength and the film strength is a desirable property of the basic resin in terms of the bubble strength, gauge uniformity, and long-term storage properties. In addition, the design of the top shell of the balloon and its stress distribution play an important role since only a fraction of the balloon is deployed during the filling operation and the ascent. In this paper we describe the mechanical properties of the ‘ANTRIX’ film developed by us and the optimized design of single cap balloons, which have been successfully used in our experiments over the past 5 years.     

V形前缘对激波入射边界层流动影响的数值模拟与分析

为指导V形溢流唇口下游的进气道内部流动分析,采用数值模拟开展V形尖前缘对二维斜激波入射平板边界层流动的影响研究。以气流偏转角6°的二元楔面为基准激波发生器,设计了展向气流收缩角α(0°~60°, 0°对应二元构型)的V形前缘构型,开展对比研究。结果表明,V形前缘构型使得激波入射位置沿展向不均匀、流动具有明显三维特征,并且干扰区壁面压强上升、分离区尺度明显增大。在α=0°~60°范围内,干扰区流动的不均匀程度、分离区尺度随α增大单调增加。进一步分析表明,V形前缘构型干扰具有中间平直、侧边斜掠的耦合入射特性,体现为对称面壁面压强符合自由干扰理论,侧边斜掠入射区参数符合斜掠干扰的锥形流特征。对比二元与α=45°构型的无粘模拟结果,V形前缘会诱导展向两侧对称的斜掠激波、并在对称面相互干扰产生平直的“桥”激波,这使得激波入射位置沿展向不均匀并偏向下游。其中对称面处平直入射激波压升比(2.49)高于二元构型结果(2.24),侧边斜掠激波强度与二元构型基本一致。这些因素综合导致V形前缘构型的分离尺度增大。     

DZ22高温合金复杂应力疲劳强度研究

一、疲劳强度计算方法的建立　　定向凝固镍基高温合金 DZ2 2是一种正交各向异性材料 ,对于各向异性材料 ,由于偏轴向拉剪和剪拉耦合的存在 ,形状改变与体积变化无法分开 ,仅考虑剪切应变能不足以说明各向异性材料的失效 ,还需要考虑体积改变能。据此认为 Tsia- Wu理论 [1 ] 较 Hill理论 [2 ] 更能有效地反应各向异性材料的失效 ,并根据 Tsai- Wu理论导出一个疲劳强度的计算方法。Tsai- Wu假设各向异性材料在应力空间中的破坏表面可表示为一个高阶张量多项式 ,并提出了以二阶张量多项式为破坏准则的计算方法 ,即Fijσiσj+ Fiσi =1 ( …