GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

民航飞机放行评估实验教学方法研究

飞机放行评估是航空公司进行运行控制的一项重要内容,它直接决定了航空公司运行和服务的质量。文中通过对中国民航大学现有的教学资源和现用的教学方法进行介绍,并进一步提出改革建议,从而有助于更好地搭建实验平台,提高教学质量。     

论动机理论对大学英语教学的启示

学习动机是学习者在第二语言习得过程的诸多因素中最具能动性的因素,是推动大学生进行学习活动的动力,直接影响到大学生进行学习活动的积极性。二语习得中的动机理论给我们大学英语教学以重要启示,它将会成为大学英语教学成功与否的关键所在。     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.     

等温锻造Ti—47Al—2Cr—1Nb合金显微组织细化机理

Ti 4 7Al 2Cr 1Nb(at % )合金经等温锻造形变热处理后 ,显微组织得到显著细化 ;TEM分析表明 ,TiAl合金在等温变形时 ,形变主要以γ相板条内产生变形孪晶的方式进行 ;大部分变形孪晶垂直于α2 /γ界面 ,热处理时易形成再结晶核心 ,形成等轴γ晶粒     

热压工艺在Cf／SiC复合材料制备中的应用

探讨了热压工艺 (HP)在常压浸渍裂解 (PIP)制备 Cf/Si C复合材料制备过程中的应用 ,认为热压浸渍裂解工艺 (HP-PIP)既可以改善碳纤维与基体 Si C之间的界面 ,又可以提高材料的致密度 ,使材料内部的空隙减少或消失 ,同时使孔隙排布均匀 ,从而使材料的性能有了大幅度提高 ,其强度由原来的 2 90 MPa提高到 5 40 MPa,并且可重复性很好     

CFD数据交易标准及其软件实现

论述推行统一的CFD数据交换标准的必要性 ;报告在研制通用航空气动力数值模拟系统ANSS2 0 0 0过程中 ,建立内部数据接口文件规范的尝试 ;推荐国际上主流的空气动力学和CFD数据库标准———CGNS ;讨论CGNS在ANSS2 0 0 0中的实现 ;大力呼吁同步使用与国际接轨的CFD数据交换标准。     

轴流压气机气动弹性失稳的实验研究

本文介绍了在跨音压气机试验台上对BF-1系列转子开展气动弹性失稳的实验研究工作。文中提出了实验模型的零阻尼设计原则,描述了失速颤振发生的过程。分析了失速颤振发作时的气动声学现象——一种特殊的啸声。此外还给出了两种叶尖间隙和两种叶型对失速颤振影响的实验结果。最后对经验预测方法和实验结果作了对比,符合情况较好。      

气、液组合膜流对壁面冷却效果的理论及试验研究

本文针对液膜及气膜组合流动的特点,提出了组合薄膜流动的“四层式流场物理模型”.根据所做简化、假设,对液膜区流场结构及冷却效果进行了理论计算,并通过分析方法,对其紧接的气膜段流动及冷却效果进行了理论预估.试验的结果表明:液膜段的理论计算与试验数据基本相符.并从试验中发现了液膜蒸干后气膜段冷却的一些特点.这对研究液体冷却时液膜及气膜组合流动的冷却效果提出了可行的途径.