SPACEBUS3000卫星平台及其测控系统

介绍了法国宇航公司ＡＥＲＯＳＰＡＴＩＡＬＥ研制的通信卫星平台ＳＰＡＣＥＢＵＳ３０００的主要电子系统结构和功能，着重介绍了它的测控系统部分，包括数管子系统和射频子系统的详细结构和功能划分，以及它们的设计方案。     

固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

光纤加速度传感器

介绍开环和闭环两种光纤加速度传感器的特点、工作原理和结构简图，论述了温度对开环光纤加速度计的影响，以及解决此影响的方法，并给出了消除温度漂移误差的系统框图。     

定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

固体火箭发动机点火过程内流场的二维预示

本文对固体火箭发动机点火过程的内场流进行了二维无粘非定常分析，计算得到了该阶段燃烧室中压强，温度和速度的分布。本文还提出了以近似预示复杂三维装药发动机内流场的有效积法。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

轴对称横向喷流强干扰流场的巨型机向量并行计算

本文在国产巨型计算机ＹＨ－１和ＹＨ－２上对ＭａｃＣｏｒｍａｃｋ显格式解轴对称横向喷流强干扰流场的计算程序进行了重构和向量优化使其能并行执行。得到该程序在ＹＨ－１上的向量加速比约为６．０，ＹＨ－２单机向量运行速度约为ＹＨ－１上的向量运行速度的３倍。与传统的串行计算相比较，并行计算大大缩短了程序运行的ＣＰＵ时间。