航天产品实施通用化、系列化、组合化有关问题的研究

阐述了在航天产品研制中全面实施“三化”是以最少人力、最低成本、最短研制周期满足最可靠产品的重要途径和手段,分析了目前航天产品实施“三化”存在的主要问题及原因,探讨了实施的基本思路,从意识形态、组织机构和政策倾斜等方面提出了加强“三化”工作的对策。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

Emergence of a Habitable Planet

We address the first several hundred million years of Earth’s history. The Moon-forming impact left Earth enveloped in a hot silicate atmosphere that cooled and condensed over ∼1,000 yrs. As it cooled the Earth degassed its volatiles into the atmosphere. It took another ∼2 Myrs for the magma ocean to freeze at the surface. The cooling rate was determined by atmospheric thermal blanketing. Tidal heating by the new Moon was a major energy source to the magma ocean. After the mantle solidified geothermal heat became climatologically insignificant, which allowed the steam atmosphere to condense, and left behind a ∼100 bar, ∼500 K CO₂ atmosphere. Thereafter cooling was governed by how quickly CO₂ was removed from the atmosphere. If subduction were efficient this could have taken as little as 10 million years. In this case the faint young Sun suggests that a lifeless Earth should have been cold and its oceans white with ice. But if carbonate subduction were inefficient the CO₂ would have mostly stayed in the atmosphere, which would have kept the surface near ∼500 K for many tens of millions of years. Hydrous minerals are harder to subduct than carbonates and there is a good chance that the Hadean mantle was dry. Hadean heat flow was locally high enough to ensure that any ice cover would have been thin (<5 m) in places. Moreover hundreds or thousands of asteroid impacts would have been big enough to melt the ice triggering brief impact summers. We suggest that plate tectonics as it works now was inadequate to handle typical Hadean heat flows of 0.2–0.5 W/m². In its place we hypothesize a convecting mantle capped by a ∼100 km deep basaltic mush that was relatively permeable to heat flow. Recycling and distillation of hydrous basalts produced granitic rocks very early, which is consistent with preserved >4 Ga detrital zircons. If carbonates in oceanic crust subducted as quickly as they formed, Earth could have been habitable as early as 10–20 Myrs after the Moon-forming impact.     

The Interplanetary Internet: a communications infrastructure for Mars exploration

A strategy is being developed whereby the current set of internationally standardized space data communications protocols can be incrementally evolved so that a first version of an operational "Interplanetary Internet" is feasible by the end of the decade. This paper describes its architectural concepts, discusses the current set of standard space data communications capabilities that exist to support Mars exploration and reviews proposed new developments. We also speculate that these current capabilities can grow to support future scenarios where human intelligence is widely distributed across the Solar System and day-to-day communications dialog between planets is routine.     

Finding a ‘genuine’ space policy for Europe: the European space policy workshop series

Despite some impressive programmes, Europe has not yet succeeded in forging a coherent space policy and, as a result, has not achieved its full potential in this field. As efforts to formulate a more comprehensive policy intensify, a series of workshops has been initiated in order to provide an independent platform, allowing broad participation, for discussion of the issues. This article describes the rationale behind the process and the structure of the workshops and reports on the highlights of the first workshop, examining the fundamental questions involved. The themes of forthcoming workshops are also presented.     

不同氧化剂对丁羟(HTPB)推进剂老化性能影响的研究

本文研究了不同氧化剂对丁羟(HTPB)推进剂老化性能的影响.实验结果表明:随着推进剂老化时间的延长,最大拉伸强度增加,伸长率降低,邵氏硬度升高,失重百分数略有下降,而相对交联密度也上升.由此可以得出结论:热稳定的、产物氧化性弱的氧化剂,对于提高丁羟推进剂的老化性能是有益的.本文进一步用热重分析方法和红外光谱法对上述结果作了验证,并对丁羟推进剂的老化机理进行了初步探讨.     

综合飞行/推力控制系统的智能设计

在介绍正规矩阵参数优化方法和着舰导引控制系统的基础上,为提高舰载飞机的操纵性能,采用智能设计软件IntelDes3．0设计了具有鲁棒性的着舰飞行,推力综合控制系统。基于飞机纵向非线性运动方程的数值仿真结果表明,设计的控制系统对阶跃输入的响应性能良好,鲁棒性较强。     

倾转旋翼机短舱倾转机构动力学仿真分析

研究倾转旋翼机短舱倾转机构在短舱从固定翼模式运动到直升机模式过程中的动力学特性具有重要的意义.在短舱倾转机构传力分析及运动学分析的基础上,应用LMS Motion建立了短舱倾转机构多体动力学仿真模型,定义短舱倾转机构的各构件及其属性,创建各构件之间的运动副,定义运动机构驱动,创建外力和力矩以模拟真实的工况,得到并分析短舱和丝杠的主要运动参数曲线以及机构主交点的受力变化情况.结果表明:丝杠与短舱连接点处作用力随短舱的仰角增大先减小再增大,短舱与机翼支点处作用力随着短舱的仰角增大而逐渐增大.研究结果可为倾转旋翼机短舱倾转机构的参数确定提供参考.     

导弹复合材料立尾的动力特性分析

对Ｈｅｌｌｉｎｇｅｒ－Ｒｅｉｓｓｎｅｒ变分原理进行了详尽论述。依据该变分原理推导了基于折线假设的复合材料层板元素的刚度矩阵，复合材料面板蜂窝夹芯元素的刚度矩阵。在形成元素刚度矩阵时，在子域一极求逆节省大量机时。介绍了动力特性的分析和试验方法。运用Ｈ－Ｒ元素计算了导弹复合材料立尾的动力持性，取得了满意的结果。     

几种流体壁面剪切力测压管的性能研究

对四种壁画型流体剪切力测量差压计Ｓｔａｎｔｏｎ管，Ｋ型管，穴型管，及微孔表面差压管在湍流边界层条件下进行试验并对其结构特点进行比较后表明，这四种差压计具有相同的特征，所测量的区差均为流量动量变化所致，其流体剪切力可以表示为τ＝Ｃ△Ｐ￣ｎ，为避免对标定数据过于繁复的多段拟会，并使差压计能在较大测量范围内保持拟合公式的精度，各类差压管在与固体壁画铅垂方向上的尺度值应尽量低，微孔表面差压管结构复杂，灵敏度低，但它具有线性特性。