Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

高空环境下喷嘴参数对航空活塞发动机燃烧与性能的影响

以一台四缸四冲程压燃式航空煤油活塞发动机为研究机型,运用工程系统高级建模和仿真平台软件(AMESim)仿真软件建立了发动机的整机模型,并使用台架实验的采集数据对该仿真模型进行了验证。在高空环境中,仿真分析了飞行器起飞工况、最大巡航工况下发动机喷油器的不同喷孔数、孔径对发动机燃烧过程、性能和NOx排放特性的影响。计算结果表明:稳态工况下,随着喷孔数的增加,最高燃烧压力和温度增加,瞬时放热率增长速度快且峰值上升;同时,缸内预混燃烧得到强化,燃烧始点提前,滞燃期和燃烧持续期缩短,燃烧重心前移,循环热效率增高,但同时会提高NOx的生成量;在飞行器瞬态变海拔的起飞工况下,多喷孔数、小孔径的喷油嘴有利于航空活塞发动机在高空环境下恢复发动机功率,提升飞行器的动力性和续航性能。      

高硅氧纤维增强苯并噁嗪树脂复合材料的制备及性能

以苯并噁嗪为基体树脂,短切高硅氧纤维为增强材料,制备了一种模压用复合材料。研究了该树脂的热性能、固化动力学性能及力学性能。结果表明,苯并噁嗪增强高硅氧纤维混合物随固化温度升高工艺窗口未发生显著变化,利用Kissinger、Crane法得到固化反应活化能为69.619 kJ/mol,反应级数为0.95。复合材料拉伸强度为35.5 MPa,,压缩强度为196 MPa,线烧蚀率为0.14 mm /s.     

液体推进剂热稳定性研究方法探讨

为研究液体推进剂的热分解特性,利用差示扫描量热仪（DSC）和绝热加速量热仪（ARC）,对自行研制的3种液体推进剂进行了热分解过程研究,并对其热稳定性进行了探讨.分析了DSC和ARC两种方法在研究液体推进剂热分解方面的优劣性.     

Dynamical Model Updating Based on Modal Tests with Changed Structure

A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision. By measuring the mode frequencies and shapes of both of the original and the new structures with changed stiffness and mass, the stiffness and mass matrices of the finite element model can be updated through matrices calculation and solving algebra equations. Taking a multi-freedom model as an example, the relation between the number of the modes and the correction precision of stiffness and mass matrix elements is researched. The facility and precision of the method are totally confirmed especially when the modeling error is known limited to a definite local range. The feasibility of the approach is proven by an effective engineering application to the model updating of a wing piece used in flutter test.     

星敏感器光谱探测能力用地面模拟测试系统设计

为实现对星敏感器光谱探测能力的测试和标定, 研制了一套可模拟恒星光谱的地面标定系统, 要求其光谱模拟精度优于10%. 采用光谱分布可控、光强可调的模拟照明系统作为地面标定系统的核心器件来模拟恒星光谱变化, 设计高成像质量准直光学系统使模拟星图成平行光出射, 在光学系统出瞳处产生星图, 完成具有恒星光谱信息的高精度星图模拟. 进而利用Lighttools建立标定系统的光谱仿真模型, 仿真结果表明恒星光谱模拟精度优于10%.      

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

载波相位辅助的GPS动态单点定位算法综述

对载波相位辅助条件下应用于全球定位系统（Global Positioning System,GPS）动态单点定位的各种算法进行了综合分析与比较。首先简要介绍定位算法中的基本公式与观测模型;然后分别对周跳修复与滤波解算两部分所应用的各种算法进行详细介绍并比较其性能与适用范围;最后对尚待解决的问题及可能的发展方向进行了总结。     

光伏发电系统中高升压比DC-DC变换器

光伏发电作为太阳能的重要应用方式正受到越来越广泛的关注,普遍采用前级DC-DC变换和后级逆变的结构。单相逆变器的输出电压通常为220 V(AC),这就要求前级DC-DC变换器具有很高的升压比。由于单级式DC-DC变换器难以满足要求,本文采用Boost变换器加ZVS全桥直流变压器的两级式结构。针对ZVS全桥直流变压器的不足,将LLC谐振网络应用于全桥直流变压器电路,提出了一种全桥LLC谐振直流变压器,从而实现整个负载范围内开关管的ZVS和整流二极管的ZCS。最后,分别制作了两台1 kW的原理样机进行实验验证,实验结果验证了理论分析的正确性。