某型号真空热试验污染问题排查及对策解析

文章遵照航天型号对质量问题按"双五条"归零的要求,对某型号卫星真空热试验发生污染的问题进行仔细排查,找到了产生污染的原因,主要是由于加热带温度的失控导致了红外加热笼黑漆在真空高温环境下的挥发.随后通过问题复现验证了结论的正确性,从而制定了有效的措施.文章体现了型号质量问题从技术上"归零"的全过程.     

基于频谱仪的脉冲调制信号功率校准技术研究

脉冲调制信号是雷达和数字通信系统中的一类重要信号。本文主要研究脉冲调制信号的功率测量方法,讨论并分析了脉冲调制信号的频谱特点,提出使用频谱分析仪实现脉冲调制信号的平均功率和峰值功率的测量,并采用正弦调幅法对频谱分析仪的测量结果进行验证。实验表明使用频谱仪测量脉冲调制信号功率简单易行且具有较高的测量精度。     

径向入射激波聚焦实验和数值模拟研究

为得到不同入射激波马赫数对凹腔内径向入射激波聚焦过程的影响,对马赫数为1.25和2.18的径向入射激波在实验段内反射聚焦的过程进行了实验和数值模拟研究。用高速CCD拍摄了凹腔中气流流场的纹影图片,并采用保持强稳定性的龙格—库塔格式、加权基本无振荡算法和块结构动态自适应网格加密对激波反射聚焦的过程进行了数值模拟,实验和数值模拟结果吻合较好。复杂的激波形状及其之间的相互作用(如激波反射,激波聚焦和不同激波的相互作用)在实验和数值模拟中都能很好地观测到。通过比较不同马赫数入射激波的反射聚焦过程,发现较高的马赫数下聚焦后能产生射流,而较低的马赫数下却没有。同时发现,入射激波马赫数能影响二次激波出现的位置和强度,进而影响聚焦过程流场的紊乱程度。     

滨海发射场火箭整流罩空调控制策略研究

直流式整流罩空调在夏季高温、高湿、高盐雾环境中,存在制冷量有台阶、热工影响因素多、受环境影响大、响应特性差等问题,对此展开分析,提出了比例积分微分(Proportion-al Integral Derivative,PID）控制、温湿度解耦、制冷量台阶处理等空调控制策略,并对其进行试验验证,结果表明该措施有效。采用该控制策略对航天器进行环境保障,满足航天器对火箭整流罩内的温湿度要求。     

复材先锋服务中国——本刊总编辑刘柱与美国赫氏复材公司中国区首席代表陆雄兵对话

作为全球最主要的先进复合材料公司,美国赫氏复材在中国有着很高的知名度,其上海代表处在中国的服务已超过10年,与中国企业的合作有超过15年的历史.     

库仑分析法测定岩矿石中的金

研究了氢醌库仑法测定金含量的方法、条件、考察共存离子的影响，并应用于岩矿石中金的分析。研究表明该法选择及结果都很好。     

Top-level modeling of an ALS system utilizing object-oriented techniques.

The possible configuration of an Advanced Life Support (ALS) System capable of supporting human life for long-term space missions continues to evolve as researchers investigate potential technologies and configurations. To facilitate the decision process the development of acceptable, flexible, and dynamic mathematical computer modeling tools capable of system level analysis is desirable. Object-oriented techniques have been adopted to develop a dynamic top-level model of an ALS system.This approach has several advantages; among these, object-oriented abstractions of systems are inherently modular in architecture. Thus, models can initially be somewhat simplistic, while allowing for adjustments and improvements. In addition, by coding the model in Java, the model can be implemented via the World Wide Web, greatly encouraging the utilization of the model. Systems analysis is further enabled with the utilization of a readily available backend database containing information supporting the model. The subsystem models of the ALS system model include Crew, Biomass Production, Waste Processing and Resource Recovery, Food Processing and Nutrition, and the Interconnecting Space. Each subsystem model and an overall model have been developed. Presented here is the procedure utilized to develop the modeling tool, the vision of the modeling tool, and the current focus for each of the subsystem models.     

Application of nonlinear filtering to navigation system designusing passive sensors

The problem of navigation system design for autonomous aircraft landing is addressed. New nonlinear filter structures are introduced to estimate the position and velocity of an aircraft with respect to a possibly moving landing site, such as a naval vessel, based on measurements provided by airborne vision and inertial sensors. By exploring the geometry of the navigation problem, the navigation filter dynamics are cast in the framework of linear parametrically varying systems (LPVs). Using this set-up, filter performance and stability are studied in an H_∞ setting by resorting to the theory of linear matrix inequalities (LMIs). The design of nonlinear, regionally stable filters to meet adequate H_∞ performance measures is thus converted into that of determining the feasibility of a related set of LMIs and finding a solution to them, if it exists. This is done by using-widely available numerical tools that borrow from convex optimization techniques. The mathematical framework that is required for integrated vision/inertial navigation system design is developed and a design example for an air vehicle landing on an aircraft carrier is detailed     

液膜法处理石化厂碱渣含酚废水的研究

本文研究了液膜法处理石化厂碱渣含酚废水的最佳制乳条件，最佳传质条件，并应用于不同浓度含酚水样处理。当挥发酚浓度低于７０００ＰＰｍ时，顷一级传质可使含酚量低于１００ＰＰｍ，７０００￣２００００ＰＰｍ，级二级传质可使含酚量低于１００ＰＰｍ，处理后废水可直接排放到石化厂和生化厂处理，为进一步进行中试研究提供了理论依据。     

导弹飞行安全区确定

对导弹飞行安全区进行了确切定义,分别对正常飞行弹安全区和故障飞行弹安全区进行了定量研究。在研究故障弹安全区时,从对导弹飞行安全产生的最终效果出发,对各种故障进行了科学分类,并建立了各类故障的故障方程,进而给出了导弹飞行安全区的计算模型和方法,这些模型和方法不仅符合故障飞行的物理背景,而且工程计算简单可靠。