The Broad Band X-Ray Telescope

The Broad-Band X-Ray Telescope (BBXRT) has been designed to perform high sensitivity, moderate resolution spectrophototnetry of X-ray sources in the 0.3–12 keV band from the Shuttle. It consists of a coaligned pair of high throughput, conical X-ray imaging mirrors, with a cryogenically-cooled, multiple element, Si(Li) spectrometer at the focus of each. On axis, BBXRT will have an effective area of 580 cm² at 2 keV and 250 cm² at 7 keV, and a spectral resolution of 110 eV at 2 keV and 150 eV at 7 keV. A 10⁴ s observation with BBXRT will allow a determination of the continuum spectral shape for sources near the Einstein deep survey limit.     

Analysis of solar degradation to TDRS S-band phased array antenna

A study of the distribution of gain-to-noise-temperature (G/T) values for the Tracking and Data Relay Satellite (TDRS) satellite is described. The statistics of the G/T values are determined by a Monte Carlo simulation of the orbital geometry of the Sun and Moon, and the gain and noise temperature calculations is included. The results and their underlying assumptions are described     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

Hardware-in-the-loop testing technology for integrated control and condition monitoring systems of aircraft gas turbine engines

Hardware-in-the-loop testing technology for automatic control, condition monitoring and diagnostics systems of gas turbine engines is described. The technology proposed makes it possible to simulate combinations and chains of unexpected and gradual failures of engines, transducers and actuators.     

Application of interference holography method for diagnostics of turbomachine part technical condition

Examples of application of the interference holography method for diagnostics of failure, technical condition and in nondestructive check of turbomachine parts are presented.     

Algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter

The algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter is considered; the support makes it possible to significantly reduce accumulating errors that are due to incomplete data on wind parameters and decrease requirements for random errors of initial data sensors.     

A set of systems for labor standards computer-aided design

A set of systems for labor standard computer-aided design is described, namely, initial developments, advance and state-of-the art.     

A combined turbulent combustion model in studying a lean flameout process

A modification of the Zimont turbulent combustion model is presented; the modification makes it possible to describe processes in diffusion and homogeneous flame fronts as well as to take into account the influence of different factors that cause flame destabilization. The model is based on the equation for a reaction completeness extent (completeness of combustion). The model realization to simulate the premixed combustion is described and the modification of the turbulent combustion model is applied to simulate a process of flameout downstream of the flameholder.     

Experimental study on the PRE-X vehicle focusing on the transitional shock-wave/boundary-layer interactions

This article is devoted to the experimental works carried out in the R2Ch blow-down wind tunnel in the framework of the atmospheric re-entry PRE-X demonstrator program and to the fundamental studies performed on a hollow cylinder-flare relative to crucial problem of the transitional shock-wave/boundary-layer interaction.Shock-wave/boundary-layer interactions in hypersonic flows may have major consequences on thermal loads, especially if the shock is strong enough to induce separation. The heat-flux density levels in the interaction region strongly depend on the nature, laminar or turbulent of the boundary-layer. Special attention should be paid to transitional interactions, which are likely to exist at altitude where the Mach number is high and the density low.The wide Reynolds number range achievable in the R2Ch facility and reliable heat-flux measurements by infrared thermography have allowed to investigate the viscous interaction on the deflected flaps of the demonstrator model and to point out the laminar-to-turbulent boundary-layer natural and forced transition, in the light of the in-depth analysis of results obtained from the hollow cylinder-flare study.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.