Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

Performance limits of sensor-scheduling strategies in electronic support

The case is considered in which a frequency-agile receiver (FAR) for electronic support (ES) attempts to intercept radar emissions over a wide search bandwidth. It was recently shown [1,2] that a random strategy exists in which the expected intercept time can be made arbitrarily close to linear as a function of the scan period of the radar. Can a deterministic strategy be devised in which a similar linear relationship exists for the maximum intercept time? By applying the celebrated arithmetic results of van der Waerden [3] and Szemeredi [4], we show that no such strategy is possible.     

Simple adaptive control for aircraft control surface failures

This work extends the so-called simple adaptive control approach to direct model reference adaptive control of multi-input multi-output systems to include loss of control effectiveness failures. It is proven that all signals are bounded for loss of control effectiveness failures during a bounded input disturbance. A state space approach is introduced for computing the feedforward compensator that is required by the stability result. The adaptive algorithm is applied to a three input model of the linearized lateral dynamics of the F/A-18 aircraft. Simulation results are obtained with single, double, and triple control effectiveness failures of 88% during the occurrence of a lateral gust. These results show that the adaptive controller exhibits improved model following as compared with a fixed gain eigenstructure assignment controller.     

Information extraction from thematic mapper data

The Landsat-4 spacecraft, launched on July 9, 1982, is equipped with a new electro-optical sensor expected to advance the remote sensing capabilities of Earth resources satellites. An experimental instrument, the thematic mapper (TM), provides data in seven discrete energy bands with greatly improved spectral, spatial and radiometric resolution, relative to previous Landsat satellite systems. Scientists at NASA, National Space Technology Laboratories (NSTL), Earth Resources Laboratory (ERL) conducted an evaluation of Landsat-4 TM data, soon after its launch, to examine the potential of this new electro-optical sensor for providing improved information for renewable resources and land cover studies. Investigations of TM data included forested wetland, urban and agricultural land covers using a scene of data collected over Arkansas and Tennessee on August 22, 1982. Standard digital information extraction techniques were employed, and the classification accuracies achieved with a single date TM data set exceeded a 90% correct confidence level. While only spectral analysis techniques were utilized for this initial evaluation, the results clearly indicate the improved performance provided by the experimental TM sensor over previous Earth observing capabilities.     

Cell inactivation, repair and mutation induction in bacteria after heavy ion exposure: results from experiments at accelerators and in space.

To understand the mechanisms of accelerated heavy ions on biological matter, the responses of spores of B. subtilis to this structured high LET radiation was investigated applying two different approaches. 1) By the use of the Biostack concept, the inactivation probability as a function of radial distance to single particles' trajectory (i.e. impact parameter) was determined in space experiments as well as at accelerators using low fluences of heavy ions. It was found that spores can survive even a central hit and that the effective range of inactivation extends far beyond impact parameters where inactivation by delta-ray dose would be effective. Concerning the space experiment, the inactivation cross section exceeds those from comparable accelerator experiments by roughly a factor of 20. 2) From fluence effect curves, cross sections for inactivation and mutation induction, and the efficiency of repair processes were determined. They are influenced by the ions characteristics in a complex manner. According to dependence on LET, at least 3 LET ranges can be differentiated: A low LET range (app. < 200 keV/micrometers), where cross sections for inactivation and mutation induction follow a common curve for different ions and where repair processes are effective; an intermediate LET range of the so-called saturation cross section with negligible mutagenic and repair efficiency; and a high LET range (>1000 keV/micrometers) where the biological endpoints are majorly dependent on atomic mass and energy of the ion under consideration.     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Space science education in Egypt and the 2006 solar eclipse

The space science research has been started in Egypt since 1910 by measuring the solar constant as indication of solar radiation at Helwan Observatory. The solar sunspot studies and its influence on the Nile flooding was erected and operated at Helwan as a first solar station in Egypt during 1957. Zeiss-Coude’ refractor was installed in 1964. Astronomy and space science educations started in Egypt at the university level since 1936 at Department of Astronomy and Meteorology of Cairo University. Undergraduate and graduate education in Egypt will be discussed in this work.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Integrated Planning and Execution for Autonomous Spacecraft

An autonomous spacecraft must balance long-term and short-term considerations. It must perform purposeful activities that ensure long-term science and engineering goals are achieved and ensure that it maintains positive resource margins. This requires planning in advance to avoid a series of shortsighted decisions that can lead to failure. However, it must also respond in a timely fashion to a somewhat dynamic and unpredictable environment. Thus, in terms of high-level, goal-oriented activity, spacecraft plans must often be modified due to fortuitous events such as early completion of observations and setbacks such as failure to acquire a guidestar for a science observation. This describes an integrated planning and execution architecture that supports continuous modification and updating of a current working plan in light of a changing operating context.     

Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP "Sharc" and IMU parameters are forecasted.