Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.     

Solar modulation model with reentrant particles

We developed a one dimensional model of particle transport in the heliosphere. As opposite to widely used models, we apply a method where a quasi-particle is traced back in time. The model gives us the possibility to work on the possible existence of reentrant particles in the heliosphere that can be hardly solved by the traditional forward tracking method. Particles escape from the heliosphere and may reenter back. We estimate how these particles affect the modulation process in the heliosphere. Presented here are the results for different values of particles mean free path in the interstellar space and for different interstellar magnetic field values.     

“Modular Biospheres” – New testbed platforms for public environmental education and research

This paper will review the potential of a relatively new type of testbed platform for environmental education and research because of the unique advantages resulting from their material closure and separation from the outside environment. These facilities which we term “modular biospheres”, have emerged from research centered on space life support research but offer a wider range of application. Examples of this type of facility include the Bios-3 facility in Russia, the Japanese CEEF (Closed Ecological Experiment Facility), the NASA Kennedy Space Center Breadboard facility, the Biosphere 2 Test Module and the Laboratory Biosphere. Modular biosphere facilities offer unique research and public real-time science education opportunities. Ecosystem behavior can be studied since initial state conditions can be precisely specified and tracked over different ranges of time. With material closure (apart from very small air exchange rate which can be determined), biogeochemical cycles between soil and soil microorganisms, water, plants, and atmosphere can be studied in detail. Such studies offer a major advance from studies conducted with phytotrons which because of their small size, limit the number of organisms to a very small number, and which crucially do not have a high degree of atmospheric, water and overall material closure. Modular biospheres take advantage of the unique properties of closure, as representing a distinct system “metabolism” and therefore are essentially a “mini-world”. Though relatively large in comparison with most phytotrons and ecological microcosms, which are now standard research and educational tools, modular biospheres are small enough that they can be economically reconfigured to reflect a changing research agenda. Some design elements include lighting via electric lights and/or sunlight, hydroponic or soil substrate for plants, opaque or glazed structures, and variable volume chambers or other methods to handle atmospheric pressure differences between the facility and the outside environment.     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

On the electrodynamics of counter stream in pulsar’s inner annular cap region

The electric properties of pulsar’s inner annular gap are explored in this paper. Under two main assumptions, (1) the pulsar is alive, (2) the total charge of pulsar should not vary with time, the condition for the acceleration of negative particle in the annular region is derived. The acceleration condition is j₋ ? 0.5j₊, i.e., the current carried by negative particles is greater than or equal to 0.5 times of the current carried by positive particles. This condition holds even when the backward flow of positive particles exists in the annular region. It is noted that the outflow of negative particles offers good opportunities to understand the current closure problem of pulsar as well as wide radiation beam of pulsar observed at high energy band.     

Astrophysical implications of higher-dimensional gravity

We review the implications of modern higher-dimensional theories of gravity for astrophysics and cosmology. In particular, we discuss the latest developments of STM theory in connection with dark matter, particle dynamics and the cosmological constant, as well as related aspects of quantum theory. There are also more immediate tests of extra dimensions, notably involving perturbations of the cosmic 3K microwave background and the precession of a supercooled gyroscope in Earth orbit. We also outline some general features of embeddings, and include pictures of the big bang as viewed from a higher dimension.     

Designing to MIL-STD-2165: Testability

The V-22 avionic hardware is the first to be designed under MIL-STD-2165 testability program requirements. This paper presents an overview of the avionics design-for-testability approach and lessons learned to date relative to the application of MIL-STD-2165. The paper will discuss incorporation of testability requirements up front in the avionics design which will drive the supportability philosophy at both the Organizational and Depot levels of maintenance. The paper will compare previous avionics hardware testability requirements versus those applied to the V-22 avionics and highlight areas of improvement. A discussion of testability design impacts on reduced level of testing (i.e. WRA/SRA/System) will be included. In addition, the paper discusses an innovative approach to meeting the user requirements for a man-portable forward deployed maintenance capability that forms the basis for a two level support scenario (Organizational and Depot). The innovation comes from the fact that the on-board Central Integrated Checkout system will provide data as well as fault isolation and will use this data as a mechanism to reduce the size and complexity of the stimulus and measurement hardware at either the Organizational or Depot level depending on the deployment requirements.     

Structure of the earth’s magnetosheath at small fluctuations in the interplanetary magnetic field direction

Spatial structure of the magnetosheath of the Earth was studied under the conditions when no sharp (more than 40° during 5 min) changes in the interplanetary magnetic field direction were observed. On the basis of 24 flights of the Interball-1 satellite through the magnetosheath, it is found that three regions differing from each other by parameters of the field and plasma can be observed in the magnetosheath under the above-indicated conditions. These regions also differ from the solar wind region before front of the Earth’s magnetospheric bow shock. Empirical distributions of parameters were studied in each region. Taking into account the influence of the interplanetary magnetic field direction on the processes in the magnetosheath, the cases of quasi-perpendicular and quasi-parallel shock waves were considered separately. The study showed that the distribution of parameters in the selected regions (in the solar wind before front of the bow shock, in the magnetosheath behind the bow shock (post-shock), in the region of the magnetosheath with minimal fluctuations in the field, and in the inner magnetosheath) differ from each other at any interplanetary magnetic field direction.