Improved rainfall estimation over the Indian region using satellite infrared technique

The GOES Precipitation Index (GPI) technique (Arkin, 1979) for rainfall estimation has been in operation for the last three decades. However, its applications are limited to the larger temporal and spatial scales. The present study focuses on the augmentation on GPI technique by incorporating a moisture factor for the environmental correction developed by Vicente et al. (1998). It consists of two steps; in the first step the GPI technique is applied to the Kalpana-IR data for rainfall estimation over the Indian land and oceanic region and in the second step an environmental moisture correction factor is applied to the GPI-based rainfall to estimate the final rainfall. Detailed validation with rain gauges and comparison with Tropical Rainfall Measuring Mission (TRMM) merged data product (3B42) are performed and it is found that the present technique is able to estimate the rainfall with better accuracy than the GPI technique over higher temporal and spatial domains for many operational applications in and around the Indian regions using Indian geostationary satellite data. Further comparison with the Doppler Weather Radar shows that the present technique is able to retrieve the rainfall with reasonably good accuracy.     

Seasonal and diurnal behavior of NO2 column density in Antarctica as observed by Mark IV,Brewer Ozone Spectrophotometer Number 153

The Meteorology Department of India has been measuring vertical column density of NO₂ at Maitri (70.7°S, 11.7°E), Antarctica since July 1999 using a Mark IV, Brewer Ozone Spectrophotometer. Maitri is situated at the south of the Antarctic circle. An analysis of 6 years of data shows that NO₂ column has seasonal variation with a maximum value during summer. It is also found that during the period when sun does not set, the NO₂ column exhibits a diurnal variation, with a peak around noon and lower values in the morning and afternoon hours. Using a simple steady-state chemical reaction scheme, an attempt has been made to explain these features.     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.     

Return to Europa: Overview of the Jupiter Europa orbiter mission

Missions to explore Europa have been imagined ever since the Voyager mission first suggested that Europa was geologically very young. Subsequently, the Galileo spacecraft supplied fascinating new insights into this satellite of Jupiter. Now, an international team is proposing a return to the Jupiter system and Europa with the Europa Jupiter System Mission (EJSM). Currently, NASA and ESA are designing two orbiters that would explore the Jovian system and then each would settle into orbit around one of Jupiter’s icy satellites, Europa and Ganymede. In addition, the Japanese Aerospace eXploration Agency (JAXA) is considering a Jupiter magnetospheric orbiter and the Russian Space Agency is investigating a Europa lander.     

Wireless Sensor Networks – A potential tool to probe for water on Moon

A Wireless Sensor Network for in situ probing of lunar water/ice is proposed. The mission scenario in single and multi-tier architectures for probing water in a permanently shadowed region of the Moon and different scenarios of exploration are discussed. The ideas presented in the paper are a positive assertion of feasibility for the sensor node hardware, given current levels of technological advancements.     

Pre-storm behaviour of NmF2 and TEC (GPS) over equatorial and low latitude stations in the Indian sector

The pre-storm behavior of NmF₂ and TEC over an equatorial station, Trivandrum (8.47°N, 76.91°E, dip 0.6°S) and a low latitude station, Waltair (17.7°N,83.3°E, dip 20°N) has been studied for a total of 18 strong geomagnetic storms with DST ? −100 nT. The simultaneous measurements of GPS-TEC and NmF₂ over Trivandrum and Waltair during the period 2000–2005 have been considered for the present study. It is found that there is a substantial increase in NmF₂ and TEC before the onset of the storm over Waltair, while the increase is not present at Trivandrum. The origin of pre-storm enhancements in electron density still remains unresolved owing to several conditions in their potential sources and occurrence mechanisms. In the present study an attempt is made to identify the possible mechanisms responsible for such enhancements in electron density of the F-region.     

Does the endolymph pass through the base of the cupula?

Whether the endolymph of the semicircular canal passes the cupular partition or not was examined using the lateral semicircular canal system of adult pigeons (Columba livia). By applying various pressures by means of injection of a dye solution through the membranous canal, it was found that the dye solution, was seen to pass the cupula even under very low pressures when the pressure was increased gradually. When pulled by a magnet, the ultrafine particles of the dextran magnetite contained in the injected fluid were found to pass through the subcupular space without evident increase of the ampullary pressure.     

Fault Detection in Dynamic Systems via Decision Fusion

Due to the growing demands for system reliability and availability of large amounts of data, efficient fault detection techniques for dynamic systems are desired. In this paper, we consider fault detection in dynamic systems monitored by multiple sensors. Normal and faulty behaviors can be modeled as two hypotheses. Due to communication constraints, it is assumed that sensors can only send binary data to the fusion center. Under the assumption of independent and identically distributed (1ID) observations, we propose a distributed fault detection algorithm, including local detector design and decision fusion rule design, based on state estimation via particle filtering. Illustrative examples are presented to demonstrate the effectiveness of our approach.     

Mercury Ion Analyzer (MIA) onboard Mercury Magnetospheric Orbiter: MMO

The Mercury Magnetopsheric Orbiter (MMO) is one of the spacecraft of the BepiColombo mission; the mission is scheduled for launch in 2014 and plans to revisit Mercury with modern instrumentation. MMO is to elucidate the detailed plasma structure and dynamics around Mercury, one of the least-explored planets in our solar system. The Mercury Plasma Particle Experiment (MPPE) on board MMO is a comprehensive instrument package for plasma, high-energy particle, and energetic neutral particle atom measurements. The Mercury Ion Analyzer (MIA) is one of the plasma instruments of MPPE, and measures the three dimensional velocity distribution of low-energy ions (from 5 eV to 30 keV) by using a top-hat electrostatic analyzer for half a spin period (2 s). By combining both the mechanical and electrical sensitivity controls, MIA has a wide dynamic range of count rates for the proton flux expected around Mercury, which ranges from 10⁶ to 10¹² cm⁻² s⁻¹ str⁻¹ keV⁻¹, in the solar wind between 0.3 and 0.47 AU from the sun, and in both the hot and cold plasma sheet of Mercury’s magnetosphere. The geometrical factor of MIA is variable, ranging from 1.0 × 10⁻⁷ cm² str keV/keV for large fluxes of solar wind ions to 4.7 × 10⁻⁴ cm² str keV/keV for small fluxes of magnetospheric ions. The entrance grid used for the mechanical sensitivity control of incident ions also work to significantly reduce the contamination of solar UV radiation, whose intensity is about 10 times larger than that around Earth’s orbit.     

Asymmetric precipitation in a coronal loop as explanation of a singular observed spectrum

Almost 10 years of solar submillimeter observations have shown new aspects of solar activity, such as the presence of rapid solar spikes associated with the launch of coronal mass ejections and an increasing submillimeter spectral component in flares. We analyse the singular microwave–submillimeter spectrum of an M class solar flare on 20 December, 2002. Flux density observations measured by Sun patrol telescopes and the Solar Submillimeter Telescope are used to build the radio spectrum, which is fitted using Ramaty’s code. At submillimeter frequencies the spectrum shows a component different from the microwave classical burst. The fitting is achieved proposing two homogeneous sources of emission. This theoretical fitting is in agreement with differential precipitation through a magnetically asymmetric loop or set of loops. From a coronal magnetic field model we infer an asymmetric magnetic structure at the flare location. The model proposed to quantify the differential precipitation rates due to the asymmetry results in a total precipitation ratio Q₂/Q₁≈10⁴–10⁵, where Q₁(Q₂) represents the total precipitation in the loop foot with the high (low) magnetic field intensity. This ratio agrees with the electron total number ratio of the two sources proposed to fit the radio spectrum.