Alfvn Waves in the Solar Wind

Alfvn waves are found to be ubiquitous in the solar wind.Recent progress in observational studies of the waves is reviewed to formulate a microscopic picture for the Alfvenic fluctuations. The main aspects of the observational properties of these waves,including the wave intervals, propagation,evolution,origin and generation,are presented.Then Alfven wave heating and acceleration of the solar wind plasma are briefly introduced.The relation of the waves to rotational and tangential discontinuities,magnetic decreases,and other relatively large-scale structures such as flux tubes/ropes,magnetic clouds and interplanetary coronal mass ejections in the solar wind is particularly investigated.Finally,some remaining open questions are also indicated due to their fundamental importance of understanding of the physical nature of Alfven waves and the role of the waves in heating and accelerating the solar wind.     

With a grain of salt: what halite has to offer to discussions on the origin of life

This experimental study investigated how the dynamics of the crystallization of the evaporite mineral halite could affect the accumulation and preservation of organic macromolecules present in the crystallizing solution. Halite was grown under controlled conditions in the presence of polymer nanoparticles that acted as an analog to protocellular material. Optical microscopy, atomic force microscopy, and laser scanning confocal fluorescence microscopy were used to trace the localization of the nanoparticles during and after growth of halite crystals. The present study revealed that the organic nanoparticles were not regularly incorporated within the halite, but were very concentrated on its surfaces. Their distribution was controlled dominantly by the morphologic surface features of the mineral rather than by specific molecular interactions with an atomic plane of the mineral. This means that the distribution of organic molecules was controlled by surfaces like those of halite's evaporitic growth forms. The experiments with halite also demonstrated that a mineral need not continuously incorporate organic molecules during its crystallization to preserve those molecules: After rejection by (non-incorporation into) the crystallizing halite, the organic nanoparticles increased in concentration in the evaporating brine. They ultimately either adsorbed in rectilinear patterns onto the hopper-enhanced surfaces and along discontinuities within the crystals, or they were encapsulated within fluid inclusions. Of additional importance in origin-of-life considerations is the fact that halite in the natural environment rapidly can change its role from that of a protective repository (in the absence of water) to that of a source of organic particles (as soon as water is present) when the mineral dissolves.     

用推力矢量控制技术改进超声速飞行器空气动力特性

为了提高某超声速飞机的空气动力学效率和机动性能,本文采用低阶的三维板块法和DATCOM半经验公式,在亚声速和超声速条件下,对不同马赫数和迎角情况计算了基本气动外形的飞机空气动力学特性、表面压力分布以及最大升力。此外还开发了一套软件以实现由引进的先进气动操纵面（如鸭翼等）控制的二维推力矢量技术。试验结果表明：气动操纵面结合推力矢量技术能够产生足够的低头力矩,且有能力满足高度机动飞行时的稳定性要求。此外,不论是亚声速还是超声速飞行,气动操纵面均可以提高气动效率5％-6％。     

利用几何遗传方法优化前缘翼根延伸的外形以增强飞行器升力系数和机动性

为了提高所选定飞行器模型的机动性,采用了一种标准遗传算法设计前缘翼根延伸(LEX).同时使用一种由三维低阶板方法结合DATCOM方法半经验公式的改进方法预测复杂外形飞行器(机身 机翼 尾翼)的空气动力载荷和最大升力系数.结果表明,在前缘翼根存在的情况下,升力系数在马赫数为0.4～0.8时提升了20.5%～15.3%,在马赫数为1.2时提升了6.8%,在马赫数为0.2～0.95之间升力系数最大值提升了9.5%～15%.在1～5 km的高度亚音速飞行时,其回转率得到了6.6%～8.0%的提升.     

风洞模拟建筑物对大气污染物扩散影响的若干问题讨论

通过相似性分析,得到了大气污染建筑物影响风洞试验应满足的基本相似条件.由一个实例研究了利用常规风洞模拟装置和测试仪器进行大气污染建筑物影响风洞试验在技术上的可行性.结果显示:由于模拟装置和仪器条件的限制,在大多数风洞试验中存在大气边界层不完全模拟和仪器响应过慢等问题,但通过合理模拟来流的主要湍流特征和改进采样方法,可以在风洞中较真实地模拟建筑物对大气扩散的影响.     

热塑塑料在宇航结构中的应用

介绍热塑塑料及其复合物的种类和在宇航领域中的应用;其潜力能否充分挖掘取决于是否能经济有效地设计和制造这些材料.正涌现出的热塑塑料在竞争激烈的工程领域有可能满足宇航应用的要求.添加合适的纤维加强物使中空成微球状来减小密度和个电特性,“塑性”材料就能广泛应用,热塑塑料当然是其中之一.但热塑塑料也不会完全取代热固性材料,它们只是相互取长补短.     

降阶脉冲发动机的点火控制逻辑

本文研究脉冲发动机在战术导弹,特别是空空导弹上的应用.因为其飞行任务要求对能量消耗作仔细地监控.一般的中程空空导弹使用助推-主发动机作为动力.除了接近交会之外,发射时导弹雷达导引头并不知道目标.一般的中程空空导弹使用比例导航或者在终段制导使用改进的比例导航,同时为了使导弹在较高的高度飞行以减小阻力,在中段附加了预编程的     

增程中程空空导弹特征结构的配置

特征结构配置适用于中程空空技术（ＥＭＲＡＡＴ）导弹自动驾驶仪的设计。通过选择一些在模型去耦基础上的理想特征矢量，来计算特征结构配置的反馈增益，并用Ａｎｄｒｙ等人建议的正交投影解法来计算特征矢量。将这种解法与Ｂｏｓｓｉ和Ｌａｎｇｅｈｏｕｇｈ提出的线性二次调节设计方法作一比较。     

网格阵列填充冷却通道内超临界正癸烷流动传热特性的数值研究

采用碳氢燃料冷却壁面是超燃冲压发动机常用主动冷却方式。为减轻主动冷却通道结构重量、提高冷却效率,本文探讨了以网格结构为填充的新型通道,从结构轻质化、流动特性及综合传热能力等方面与常规矩形主动冷却通道进行了比较。结果表明,在相同工况下,由错排网格填充的冷却通道结构综合性能最佳,其减重效果达39.93%,壁面温度显著下降,且努塞尔数最高达到光通道的2.156倍。从流动传热机理分析可看出,网格前缘冲击效应形成的马蹄涡和后缘附近发卡涡结构对强化传热贡献最大,扰动边界层和激发湍动能也是强化传热的重要因素。