SABRE雷达及其观测的Pc5地磁脉动Ⅰ.统计分析结果

本文简要介绍了相干散射雷达SABRE及其观测Pc5地磁脉动的工作原理。1985—1989年观测数据的统计分析结果表明,相位向极传播脉动事件的出现率峰值在当地时间午夜附近,而向赤道传播事件的出现率峰值则在18:00LT左右。文中给出了上述两类脉动事件出现率的日变化,与地磁活动的相关,与背景电离层等离子体对流特性的关系等统计分析结果。     

Alfvn Waves in the Solar Wind

Alfvn waves are found to be ubiquitous in the solar wind.Recent progress in observational studies of the waves is reviewed to formulate a microscopic picture for the Alfvenic fluctuations. The main aspects of the observational properties of these waves,including the wave intervals, propagation,evolution,origin and generation,are presented.Then Alfven wave heating and acceleration of the solar wind plasma are briefly introduced.The relation of the waves to rotational and tangential discontinuities,magnetic decreases,and other relatively large-scale structures such as flux tubes/ropes,magnetic clouds and interplanetary coronal mass ejections in the solar wind is particularly investigated.Finally,some remaining open questions are also indicated due to their fundamental importance of understanding of the physical nature of Alfven waves and the role of the waves in heating and accelerating the solar wind.     

单个雷达回波脉冲的多卜勒频率测量——各种干扰对测量精度的影响

一、引言使用活动目标显示法的先决条件是搜索波束每次与目标相遇,要有足够的发射脉冲命中目标。通常用线性带阻滤波器从固定物体回波信号(“杂乱回波”)中选出运动目标,这一方法基于下述原理,即固定目标的视频频谱的密度中心处于脉冲重复频率的谐波的附近,而运动目标视频频谱的密度中心(按照活动目标显示混频法)由于多卜勒调制,则以多卜勒频率为间距分布在脉冲重复频率的谐波的两边。命中目标的脉冲数量越多,这种现象就越明显。     

系统指向误差对激光测距能力的影响

本文讨论了系统指向误差、发射束宽及激光测距机测距能力之间的相互关系。一般说来,由于系统的指向误差具有统计性质,因此,测距成功概率可通过这些关系来确定。本文对一种激光测距系统进行了详细分析,该激光测距系统在常平架上安装了镜子用作光学中继器。     

氮化铝薄膜及复合体波谐振器

为了在超高频范围内对基模振荡器进行控制和运用滤波器,开展了对于小型体波谐振器的基本材料和器件特性的研究。本文报道了氮化铝(ALN)在构成复合谐振器几何形状和边缘支撑型晶片结构方面的性能。 ALN薄膜是在直流平板磁控管溅镀装置中,用中间电极溅射出来的AL和等离子气体中的N_2之间的等离子体反应生成的。一般溅镀条件是:溅镀压力=1×10~(-3)毛,空气含氮量=99.999％基片温度=200℃,直流功率-225瓦,溅镀率=1.2微米/小时。ALN薄膜的品质用扫描式电子显微镜(SEM)、X射线衍射法和奥格(Auger)电子分光镜进行鉴定。检测结果说明,溅镀的ALN薄膜具有严格的晶向结构,其C轴垂直于Si(硅)基片表面。对于由1.7微米ALN薄膜和8微米Si基片组成的谐振器,测出的基频串联谐振频率为328.53兆赫,基频并联谐振频率为328.61兆赫。这种规格谐振器的Q值约有7500,它在-20℃至+120℃范围内的实测温度系数约为-4×10~(-8)/℃。对于具有1.7微米ALN薄膜和6微米Si基片的谐振器,实测的温度系数是-6×10~(-6)/℃。这种规格谐振器的Q值约为5000,它的基频串联谐振频率是524.11兆赫,而基频并联谐振频率是524.45兆赫。应用微电子半导体加工技术,已经制成了边缘支撑型ALN晶片。晶片厚度为1.0至7微米,面积约为300平方微米。这种晶片是边缘支撑型的,这与以前报道的底膜支撑型薄膜是不相同的。厚度为6.5微米的典型ALN晶片在790兆赫附近产生基模谐振,耦合系数为10.3％。在-20℃至120℃范围内测得的温度系数可达到-20.5×10~(-6)/℃。目前,已按外延特性制造出具有水平C轴的氧化锌ZnO晶片。这种晶片显示出切变波谐振特性,这意味着晶片有很高的谐振Q和比较简单的模式结构。     

振动与冲击测量中的校准与标准

前言机械振动与冲击都是动态现象—即其强度是随时间变化的,因为振动强度可以用位移、速度或加速度来表示,所以必须测量的     

Thoracic sonography for pneumothorax: the clinical evaluation of an operational space medicine spin-off

The recent interest in the use of ultrasound (US) to detect pneumothoraces after acute trauma in North America was initially driven by an operational space medicine concern. Astronauts aboard the International Space Station (ISS) are at risk for pneumothoraces, and US is the only potential medical imaging available. Pneumothoraces are common following trauma, and are a preventable cause of death, as most are treatable with relatively simple interventions. While pneumothoraces are optimally diagnosed clinically, they are more often inapparent even on supine chest radiographs (CXR) with recent series reporting a greater than 50% rate of occult pneumothoraces. In the course of basic scientific investigations in a conventional and parabolic flight laboratory, investigators familiarized themselves with the sonographic features of both pneumothoraces and normal pulmonary ventilation. By examining the visceral–parietal pleural interface (VPPI) with US, investigators became confident in diagnosing pneumothoraces. This knowledge was subsequently translated into practice at an American and a Canadian trauma center. The sonographic examination was found to be more accurate and sensitive than CXR (US 96% and 100% versus US 74% and 36%) in specific circumstances. Initial studies have also suggested that detecting the US features of pleural pulmonary ventilation in the left lung field may offer the ability to exclude serious endotracheal tube malpositions such as right mainstem and esophageal intubations. Applied thoracic US is an example of a clinically useful space medicine spin-off that is improving health care on earth.     

新一代RLV再入弹道模糊控制研究

基于阻力与能量的关系,优化并设计了再入参考弹道。利用模糊控制技术,在线推导了轨道控制器的各项参数。仿真结果表明,基于阻力与能量关系剖面设计的再入轨道满足各项约束,成功地导引飞行器到达TAEM终端,而模糊PD控制器则能排除干扰,实时跟踪参考弹道。     

倾转旋翼机的发展与关键技术综述

倾转旋翼机是一种新构型的飞行器，它一方面可免去跑道垂直起降，另一方面还可以相当于固定翼飞机作高速远程飞行，增大飞行包线。它集直升机和固定翼飞机特长于一身，是当今世界飞行器技术前沿性、突破性和跨越性发展的结晶。本文对倾转旋翼机国外技术的发展进行了简单回顾，并对研制过程中所存在的主要关键技术进行了综合分析。